8 Safe and Effective Methods to Unlock Your Apple iPhone SE (2020) Without a Passcode

You may get stuck with any emergency if you do not know how to unlock your Apple iPhone SE (2020)/iPad without a passcode. It can happen under various circumstances; let’s say, if you change the passcode too often, you may forget the Apple iPhone SE (2020) passcode later; your spouse may change your passcode without telling you; your naughty child accidentally locks your Apple iPhone SE (2020). So, what to do then?

Normally, you don’t believe what you see and start to try entering the passcode to unlock your Apple iPhone SE (2020). However, if you entered an incorrect passcode 10 times, you will receive a messag “iPhone is disabled, connect to iTunes “. In this case, the only way to unlock your disabled iPhone is to restore it. And that is a situation none of us would like to be in right? Hence, in this article, today, we will elaborate ways on how to unlock iPhone without passcode or restore it.

Part 1: Unlocking Your Apple iPhone SE (2020): What Are the 4 Main Causes of Failure?

Unlocking your Apple iPhone SE (2020) can be a frustrating experience, especially when you just want to access the Apple iPhone SE (2020) device. Unfortunately, there are several common reasons why an iPhone may not unlock.

Before you go ahead and take it to a technician for repair, let’s look at the main causes of why you cannot unlock your Apple iPhone SE (2020):

• If you input the wrong passcode too many times, your Apple iPhone SE (2020) will be disabled and locked. To unlock iPhone, you will need to enter the correct passcode. If you don’t remember your passcode, you can try using recovery mode to reset your device.
• When someone else has your Apple iPhone SE (2020) passcode, they can easily reset your Apple iPhone SE (2020) passcode. And you have no idea why you cannot access your Apple iPhone SE (2020). This is a relatively common problem.
• If your Apple iPhone SE (2020) screen is broken, it may be difficult or impossible to unlock the Apple iPhone SE (2020) device. In this case, you may need to take it to an Apple store or authorized service provider to have the screen repaired.
• If your Apple iPhone SE (2020) is in Lost Mode, it will be locked by others, and you will input enter the passcode associated with the Apple ID that was used to set up the Apple iPhone SE (2020) device. If you don’t remember the passcode, then Dr.Fone - Screen Unlock (iOS) will be your ideal choice.

Learn about all the solutions to unlock iPhone quickly through the video below:

safe & secure

For more tutorial videos about how to unlock your Apple iPhone SE (2020), you can explore more from Wondershare Video Community .

Keep reading to learn more feasible ways to unlock iPhone without passcode in detail!

Part 2: How to Unlock iPhone/iPad Without a Passcode? (iOS 7.0 or later)

Dr.Fone - iPhone Unlocker is a powerful software that can help you open your iDevice without a passcode. It supports all iPhone models from iPhone 6 to iPhone 15, and all iPad models. Dr.Fone-Screen Unlock is easy to use and can be used to bypass the lock screen in just a few simple steps. It can also be used to reset the Apple iPhone SE (2020) device to its factory settings, allowing you to start fresh. In this section, we will learn about this important tool for iPhone lock screen removal. Thus, instead of thinking hard about how to unlock iPhone without a passcode, you can use Dr.Fone - Screen Unlock (iOS) to do the needful.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone Lock Screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone SE (2020) quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

3981454 people have downloaded it

To use Dr.Fone - Screen Unlock to unlock your Apple iPhone SE (2020) or iPad without a passcode, follow these steps:

• Step 1. Download and install Dr.Fone - Screen Unlock (Windows version ) or (Mac Version ) on your computer.

• Step 2. Go to “Toolbox” > “Screen Unlock” > “iOS” > “Unlock iOS Screen”, then connect your Apple iPhone SE (2020) to your PC.

• Step 3. Follow the instructions to put your Apple iPhone SE (2020) into Recovery mode. When your Apple iPhone SE (2020) is in Recovery mode, the software will begin downloading firmware.

• Step 4. When the process is complete, click “Unlock Now”, and Dr.Fone will start unlocking. After a while, your device will be unlocked, and you can access your device without a passcode.

Unlock your Apple iPhone SE (2020)/iPad without a passcode now!

Part 3: The TikTok Method to iPhone Unlocking Without Using a Passcode or Face ID

There has been a viral trend on TikTok about how to unlock your Apple iPhone SE (2020) without using a passcode or your face ID, no matter which iPhone model you use. These themes of videos quickly racked up almost 9 million views.

This method states that it can enter your phone camera or calculator from the control panel, then without face ID unlocks, your phone can be used as normal.

The concrete steps of this TikTok viral method are below if you want to have a try. Maybe that’s a practical way for your emergency:

• Step 1: Swipe down on your control center (if you just want to test this way whether it works or not, cover your camera). If you are on an older iPhone 5, iPhone 6, iPhone 7, or iPhone 8, then swipe up.
• Step 2: Turn off your Wi-Fi, Data and Bluetooth, and Cellular data. Then turn on Aeroplane mode.
• Step 3: Next, you can open up the calculator app, which is also accessible from the Control Center and doesn’t require any password or fingerprint ID.
• Step 4: Please flip the phone horizontally to access the scientific calculator and type in a decimal place: 7 + 4 + EE = 280,000.
• Step 5: Turn your phone sideways to enter scientific mode, press “IN,” then Press “Rand.”
• Step 6: Swipe up on your device, and it’s unlocked.

Now you should unlock iPhone without passcode without computer or iTunes!

You May Also Like:

What To Do If You Bought A Locked iPhone?

Bypass iPhone Lock Screen Using Emergency Call

Unlock iPhone If It Doesn’t Happen With Correct Password

Part 4: Click “Erase iPhone” on the Lock Screen

This method may be a better choice for unlocking your Apple iPhone SE (2020) than using the TikTok method. It is more secure and reliable, but it works on iOS 15.2 or devices with the latest version. This method can unlock iPhone without computer.

• Step 1: Type a wrong passcode on the Lock Screen.
• Step 2: When the message appears, click “Erase iPhone” and click on it.
• Step 3: Enter your Apple ID credentials.
• Step 4: Click “Erase” to confirm that you want to erase your Apple iPhone SE (2020).
• Step 5: Wait for the process to complete, and your Apple iPhone SE (2020) will be unlocked.

Part 5: Use the Voice Control to Unlock iPhone (iOS 13 or later)

The use of Voice Control to unlock iPhone without passcode is a feature available in iOS 13 or later. Voice Control is a feature that lets you navigate your Apple iPhone SE (2020) using just your voice. It allows you to unlock your Apple iPhone SE (2020) without having to enter a passcode or use Touch ID.

Instead, you can simply say “Hey Siri” followed by a command. Voice Control also allows you to take other actions, such as launching apps and setting reminders.

To use the Voice Control feature to unlock iPhone (iOS 13 or later), you will need to set it up first. To do this, follow these steps:

• Step 1. To set up Voice Control on your Apple iPhone SE (2020), open the Settings app and tap Accessibility.
• Step 2. Tap Voice Control and then tap Set Up Voice Control.
• Step 3. Follow the on-screen instructions to create a voice profile.

When you’re finished, you can use your voice to unlock your Apple iPhone SE (2020). To unlock your Apple iPhone SE (2020):

• Step 1. Say “Hey Siri” followed by “Unlock my iPhone”.
• Step 2. You will then see authenticate using Face ID, Touch ID, or your passcode.
• Step 3. Once you’ve authenticated, your Apple iPhone SE (2020) will be unlocked.

Part 6: How to Unlock iPhone Without a Passcord Using Find My iPhone?

How to unlock iPhone without Siri and passcode using “Find My iPhone” is another method. It just takes several minutes to clean up your device. It securely removes your Apple iPhone SE (2020) lock screen without tapping the passcode. If you want to restore your Apple iPhone SE (2020) data, this is another great method to enable the features in all terms specifically.

You can perform the steps from your Apple iPhone SE (2020) directly to turn on “Find My iPhone.” Follow the below methods for the best result:

• Step 1: Use your computer or someone else’s iOS device, visit icloud.com/find, and sign in with your Apple credentials.

• Step 2: Then, you need to choose the option “All Devices”. If my iPhone is already enabled on your device, you will see your Apple iPhone SE (2020) listed. Simply click on it and choose the option “Erase iPhone.” Then all the data, including the passcode, will be removed from your Apple iPhone SE (2020). Thus, this process unlocks the Apple iPhone SE (2020) without Siri.

Note: Now, your device will reboot without a passcode. It has a strategy to restore your data and reboot into a new iPhone, thus going for a secret passcode to unlock any iPhone.

Part 7: How to Unlock iPhone Without a Passcode With the Finder or iTunes?

After looking at the maybe-trick way of the TikTok viral method and other unlock ways, an official solution from Apple, we also let you know how to fix the disabled iPhone. This method puts your phone into recovery mode with the help of iTunes or Finder on the computer. However, a small lousy side of this method is that it will erase your data along with the passcode.

Before you start, please ensure you have a computer (Mac or PC). If you’re using a PC, ensure it has Windows 8 or later and that iTunes is installed. Then, just follow the steps below to unlock your Apple iPhone SE (2020) without a password with iTunes.

• Step 1: Turn off your Apple iPhone SE (2020) through the following methods according to your Apple iPhone SE (2020) model.

Notice: If your phone is connected to the computer, please unplug your Apple iPhone SE (2020).

• Step 2: Get ready by finding the button on your Apple iPhone SE (2020), as shown in the pictures below. You’ll need to hold in the following step.

• Step 3: Connect your Apple iPhone SE (2020) to the computer where the Finder or iTunes is enabled > Click on iTunes and restore your Apple iPhone SE (2020).

• Step 4: Choose the Restore option when you see a pop-up. Your computer downloads software for your Apple iPhone SE (2020) and begins the restore process. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, turn off your Apple iPhone SE (2020), and start again.

Notice: Before the Finder or iTunes restores your Apple iPhone SE (2020), it will back up the Apple iPhone SE (2020) data in iCloud. Thus, you can download the restored files after the Apple iPhone SE (2020) device restarts.

Now, you have learned how to unlock a disabled iPhone with iTunes.

Part 8: Try DFU Mode to Bypass iPhone Passcode

DFU mode (Device Firmware Update) is a special mode on an iPhone that allows you to install firmware or software updates. It can also be utilized to bypass the passcode on an iPhone. To use DFU mode to bypass the passcode on an iPhone, follow these steps:

• Step 1. Connect your iDevice to your PC and launch the iTunes app.
• Step 2. Switch off your Apple iPhone SE (2020) and press and hold the Home and the Side/Power button for 10 seconds.
• Step 3. Release the Side/Power button, but continue to hold the Home button until iTunes recognizes your Apple iPhone SE (2020) in recovery mode.
• Step 4. When your iDevice is in recovery mode, you can use iTunes to restore your Apple iPhone SE (2020) and bypass the passcode.

Remember that using DFU mode to bypass your Apple iPhone SE (2020) passcode will erase all data from your device.

Part 9: How to Unlock iPhone Without Passcode by Tricking Siri?

In this part, we give you the solution to unlock your Apple iPhone SE (2020) without a password using Siri. You can consider it a trick or a tip as you wouldn’t be losing your Apple iPhone SE (2020) data. It works to give 100% results in even the most tricky situations.

We had a survey for the iOS 10.3.2 and 10.3.3 versions, and Siri certainly ensured one of the best ways to unlock the Apple iPhone SE (2020) without a passcode. It’s a simple way, and with it, you will have the possibility to be capable of posting and reading messages on Facebook using this Siri concept.

Let us go through the steps below to learn about how to unlock iPhone without passcode by Siri:

• Step 1: To enable the Siri feature on your Apple iPhone SE (2020) device, press and hold the home button. It will immediately activate Siri on your Apple iPhone SE (2020) device. Once it gets activated, it is ready to respond to your voice. Now, ask Siri to open the clock to rectify how to unlock a disabled iPhone. Once it displays the clock on your iOS screen, just touch it to proceed.

• Step 2: The World clock appears with the list of tunes you have to select for the alarm clock.

• Step 3: From that option, you will see the tab “buy more tunes” which straight away informs you to reach the iTunes store.

• Step 4: Just click on the home button to go to the phone’s main screen.

You will see that you can now access your Apple iPhone SE (2020) without the passcode as Siri helped unlock iPhone.

Tips: This is only used for iOS 10.3.2 and 10.3.3. If you have updated your iOS system, we recommend you try the previous methods. To make it easier, just use Dr.Fone - Screen Unlock .

FAQs about iPhone Unlock Issues

1. How to unlock iPhone without the Home button?

You can unlock your device without the Home button if you have an iPhone with a Face ID or Touch ID. To unlock iPhone without Home button:

• Step 1: Simply press and hold the Side/Top button along with either the Volume (+ or -) button until the power off slider appears on the screen.
• Step 2: Drag this slider to turn off your Apple iPhone SE (2020) completely.
• Step 3: Once it is off, press and hold the Side/Top button until you see the Apple logo.
• Step 4: This will then unlock your device.

2. How to unlock the Apple iPhone SE (2020) passcode without data loss?

You can’t unlock an iPhone passcode without losing your data, as doing so would require restoring your device to its factory settings. This will erase all of your personal data, including photos, contacts, and any installed apps. You can use iTunes or iCloud to back up your phone before restoring it.

Once you have backed up your device, you can then restore it using the backup information. That’s how to unlock iPhone without passcode.

3. How to unlock iPhone using the camera?

If you have an older version of iOS (version 9 or earlier), then there is a bug that allows you to unlock your device using the camera. To do this, simply open the Camera app and make sure it’s in selfie mode. Then, hold the Home button until you hear a clicking sound. This will unlock your device without requiring a passcode.

The Bottom Line

Dr.Fone - Screen Unlock (iOS) is a well-known featured software to unlock iPhone without passcode and works instantly after download. We have proven results, and all the methods listed above are user-friendly to the extent that no knowledge of technology is required to unlock the Apple iPhone SE (2020) without Siri. We advise you to use Dr.Fone as it will work on your Apple iPhone SE (2020) without any damage and give the desired result. However, you may choose any of the above iOS unlocking methods as you see fit.

7 Ways to Lock Apps on Apple iPhone SE (2020) and iPad Securely

Are you concerned about your privacy and would like to secure certain apps on your iOS device? Don’t worry! There are plenty of ways to app lock the Apple iPhone SE (2020) and protect your privacy. You can follow the same drill to restrict the usage of certain apps for your kids as well by taking the assistance of the Apple iPhone SE (2020) app lock feature. The app lock for iPhone and iPad options can be used pretty easily. There are plenty of native and third-party solutions out there that you can use. In this post, we will make you familiar with seven different techniques on how to lock apps on iPhones and iPads.

Part 1: How to Lock Apps on iPhone with Screen Time?

Utilizing Screen Time on your Apple iPhone SE (2020) offers a versatile way to manage app access. It is done through time restrictions and a dedicated passcode. By implementing Screen Time settings, you can exercise control over app usage. It ensures added security and regulated access to your preferred applications. Now, let’s walk through the steps to learn how to lock apps on iPhone Screen Time:

Step 1. Begin by accessing the Settings on your iOS device and tapping on the “Screen Time” option. On the ensuing screen, tap “App Limits,” followed by “Add Limit.”

Step 2. Select the apps or categories of the apps, tap “Next,” and choose the “Time Limit” for the selected apps. After deciding the time limit, press “Add” from the top right corner to add an app limitation.

Part 2: How to Lock Apps on iPhone with Face ID & Passcode?

Leveraging the advanced security capabilities of Face ID or Passcode on your Apple iPhone SE (2020) X or later models effectively fortifies app access. By using facial recognition or passcodes, you can put in place an extra layer of protection. It can be done for specific apps, safeguarding your sensitive data from unauthorized access. Now, let’s proceed with the detailed steps to lock apps using Face ID or Passcode on your iOS device:

Step 1. After opening the Settings app on your Apple iPhone SE (2020), scroll down to access “Face ID & Passcode.” Here, you will be required to provide the passcode of your device.

Step 2. After providing the passcode, select “Other Apps” and check the apps that have Face ID enabled. Remember, you’re unable to manually include apps in the list. Only those apps that have sought access to the feature will appear here automatically.

Part 3: How to Lock Apps on iPhone Using Shortcuts?

If you are unable to lock the targeted app directly with Face ID, there is no need to worry. There exist workarounds that you can use, and one of them is using the Shortcuts app. It won’t directly lock apps with the Face ID. Instead, it provides a workaround by creating a shortcut that redirects to the lock screen.

When activated, it takes you to the lock screen, prompting Face ID, Touch ID, or Passcode to access the Apple iPhone SE (2020) device again. Use the following steps to lock your apps using the Shortcuts app:

Step 1. On your Apple iPhone SE (2020), launch the Shortcuts app and select the “Automation” tab from the bottom toolbar. There, tap “New Automation” and use the search bar to look for and select “App.”

Step 2. Now, tap “Choose” in front of the “App” and select the app you want to lock. Now, move down and select “Is Opened,” then move further down to choose “Run Immediately.” Here, leave “Notify when Run” deactivated.

Step 3. Proceed forward by tapping “Next” from the top right corner, and on the following screen, tap “New Blank Automation.” Then, press “Add Action” and enter “Lock Screen” into the Search field, then choose “Lock Screen” from the search results.

Step 4. Finally, tap “Done” to finalize the shortcut. Now, upon accessing the targeted app, the shortcut will activate in the background, causing your Apple iPhone SE (2020) to be locked. You can then use the Face ID, Touch ID, or passcode to unlock it.

Part 4: How to Lock Apps on iPhone Using Restrictions?

By taking the assistance of Apple’s native Restrictions feature, you can app lock the Apple iPhone SE (2020) without any trouble. In this way, you can set up a passcode that needs to be matched before accessing any app. This iPhone app lock is also a great way to restrict your kids from accessing certain apps or making purchases. To learn how to lock apps on iPhone or iPad using Restrictions, follow these steps:

Step 1. Unlock your device and go to its Settings > General > Restrictions.

Step 2. Turn the feature on and set up a passcode for app restrictions. To provide added security, you can set up a passcode that is not similar to your lock screen passcode.

Step 3. Now, you can set up an app lock for iPhone using Restrictions. Simply go to General > Restrictions and turn this feature on for any app of your choice.

Step 4. If you want, then you can also switch this feature off for any app using the same method.

Bonus Tip: How to Unlock iPhone withoutScreen Locks (PIN/pattern/fingerprints/face)

It can be a trouble if you forget your Apple iPhone SE (2020) passcode since there are many restrictions on using iPhone. Also, if you are still unable to verify your Apple ID by using the above ways you may consider removing your Apple ID on your iOS devices. Here is an easy way to help you bypass Apple ID without a password and 100% working, which is to use Dr.Fone - Screen Unlock (iOS). It’s a professional iOS unlocker tool that can help you remove various locks on iPhones and iPads. With only a few steps, you can easily remove your Apple ID.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone iPhone-locked screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone SE (2020) quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

4,008,670 people have downloaded it

Part 5: How to Lock Apps on iPhone Using Guided Access?

Besides the Restrictions feature, you can also take the assistance of Guided Access to lock a certain app on your device. It was originally introduced in iOS 6 and can be used to restrict your device temporarily with the usage of a single app. It is mostly used by parents who would like to restrict their kids from using a single app while lending their devices. Teachers and people with special needs also use Guided Access pretty frequently. To learn how to lock apps on iPhone using Guided Access, follow these steps:

Step 1. To start with, go to your device’s Settings > General > Accessibility and tap on the “Guided Access” option.

Step 2. Turn on the “Guided Access” feature and tap on the “Passcode Settings”.

Step 3. After selecting the “Set Guided Access Passcode” option, you can set up a passcode to use it as an app lock for iPhone.

Step 4. Now, simply launch the app that you want to restrict and tap the Home button three times. This will start the Guided Access mode.

Step 5. Your phone would now be restricted to this app. You can further restrict the usage of certain app features as well.

Step 6. To exit the Guided Access mode, tap the Home screen three times and provide the respective passcode.

Part 6: How to Lock Apps on iPhone with Touch ID?

On the Apple iPhone SE (2020) 8 Series and iPhone SE, Apple offers Touch ID for security. In the process, it is similar to the Face ID available on the later iPhones. If you have an iOS device with Touch ID, here are the steps you can follow for the app lock iPhone process:

Instructions: To start, open the Settings application. Now scroll down to locate and select the “Touch ID & Passcode” option. On the following screen, you can deactivate or activate Touch ID for apps.

Part 7: How to Lock Apps on iPhone Using Third-Party Apps?

1. Lock Apps onApple iPhone SE (2020) & iPad via Famisafe

If the reason you want to lock the apps on your Apple iPhone SE (2020) has to do with managing your kid’s phone usage, we have an excellent alternative for you. FamiSafe is a reliable parental control app that offers features to monitor and manage a child’s device usage. It focuses on parental controls, including features like screen time management, location tracking, web filtering, and activity monitoring.

It offers robust controls to restrict overall device usage, set screen time limits, and monitor app usage. This helps parents guide and regulate their children’s activities on iOS devices. You can use the following steps to lock apps using FamiSafe:

Step 1: Install FamiSafe and FamiSafe Jr on Respective Devices

Get FamiSafe from the App Store and log in using your Wondershare ID or your Apple, Google, or Facebook account. Select the parent mode and link your child’s phone by installing FamiSafe Jr on their devices using either the QR code or the pairing code. Once the pairing is done, input details about your children and allow FamiSafe Jr to oversee their devices.

Step 2: Provide the Necessary Permissions to FamiSafe

Now, activate Accessibility for FamiSafe by accessing “Settings,” tapping “FamiSafe,” and enabling “Location.” Then, grant access to the Apple iPhone SE (2020) device’s photos, microphone, and motion & fitness activity. Now, use a computer and connect your child’s device with a USB cable. Activate content blockers in Safari to prevent kids from accessing inappropriate content.

Step 3: Connect the Kid’s Device to the Computer

To do that, access “Safari” in “Settings” and move to”Content Blockers” to enable FamiSafe. To get started, connect your kids’ iOS devices to your PC. Once connected, navigate to the main interface and select “Features” located at the bottom. This will display available features, and you can proceed by tapping on “App Blocker.”

Step 4: Block Any App Using the App Blocker Feature

Establish the connection between your kids’ iOS devices and your PC by pairing them with your phone. From there, effortlessly choose and block any unwanted apps on your kids’ phones. Additionally, you have the option to block apps based on their App Store ratings for added control and security.

2. Lock apps onApple iPhone SE (2020) & iPad using App Locker

Besides the native iPhone app lock solutions, you can also take the assistance of a third-party tool. However, most of these apps only support jailbroken devices. Therefore, if you wish to use a dedicated app lock for your Apple iPhone SE (2020), then you need to jailbreak your device. Needless to say, getting your device jailbroken has its perks and demerits. If you don’t want to jailbreak your device, then you can simply take the assistance of the above-mentioned solutions.

However, if you have a jailbroken device and would like to app lock the iPhone, then you can also use AppLocker. It is available at Cydia’s repository and can be purchased for just $0.99. It can be installed on your jailbroken device to get an added level of security. Not just apps, it can also be used to lock certain settings, folders, accessibilities, and more. To learn how to lock apps on iPhone using AppLocker, follow these steps:

Step 1. Firstly, get AppLocker on your device from http://www.cydiasources.net/applocker . As of now, it works on iOS 6 to 10 versions.

Step 2. After installing the tweak, you can go to Settings > Applocker to access it.

Step 3. To access the feature, make sure that you have “Enabled” it (by turning it on).

Step 4. This will let you set up a passcode to lock the apps and settings of your choice.

Step 5. To app lock, the iPhone, visit the “Application Locking” feature on your device.

Step 6. From here, you can turn on (or off) the locking feature for apps of your choice.

This will let your app lock the Apple iPhone SE (2020) without any trouble. You can also go to the “Reset Password Phrase” to change the passcode.

3. Lock Apps onApple iPhone SE (2020) & iPad using BioProtect

Just like Applocker, BioProtect is another third-party tool that works only on jailbroken devices. It can also be downloaded from Cydia’s repository. Apart from apps, you can also use BioProtect to lock settings, SIM features, folders, and more. It is linked to the Touch ID of the Apple iPhone SE (2020) device and scans the fingerprint of a user to grant (or deny) access to any app. The app only works on iPhone 5s and later devices, having a Touch ID. However, you can also set a passcode as well if your Touch ID is not working. To use the BioProtect app lock for iPhone, follow these steps:

Step 1. Firstly, get the BioProtect app to lock iPhone on your device from the right http://cydia.saurik.com/package/net.limneos.bioprotect/ .

Step 2. To access the tweak’s panel, you need to provide your fingerprint access.

Step 3. Place your finger on your Touch ID and match its print.

Step 4. This will let you access the BioProtect app settings.

Step 5. Firstly, enable the app by turning the respective feature on.

Step 6. Under the “Protected Applications” section, you can see a list of all the major apps.

Step 7. Simply turn on (or off) the feature of the app that you wish to lock.

Step 8. You can also go to the “Touch ID” feature to further calibrate the app.

Step 9. After setting the lock, you would be asked to authenticate using your fingerprint to access the protected app.

Wrap it up

By following these solutions, you would be able to learn how to lock apps on the Apple iPhone SE (2020) without much trouble. We have provided both, third-party as well as native solutions to app lock the Apple iPhone SE (2020) in a secure manner. You can go with your preferred option and provide an added layer of security on your device to keep it safe.

Locked Out of Apple iPhone SE (2020)? 5 Ways to get into a Locked Apple iPhone SE (2020)

Is your Apple iPhone SE (2020) locked, and can’t seem to remember its passcode? If your response is “yes,” then you’re in. It might surprise you, but there are a lot of ways to get into a locked Apple iPhone SE (2020). To help our readers, we have come up with this extensive post, covering different techniques for taking the lock off Apple iPhone SE (2020). Follow these expert suggestions and unlock your iOS device when you are locked out of your Apple iPhone SE (2020).

Part 1: How to get into a locked Apple iPhone SE (2020) with Dr.Fone?

If you are locked out of Apple iPhone SE (2020), you should only use a reliable and secure way to unlock it. The chances are that the above-mentioned technique might not work on your device. Hence, you can use Dr.Fone - Screen Unlock for help to unlock your phone. Compatible with almost all iOS devices, its desktop application runs on Mac and Windows. One can learn how to get into a locked Apple iPhone SE (2020) by following these instructions.

Attention: All your data all be erased after you get into your locked Apple iPhone SE (2020).Please make sure if you have backed up all your data.

Dr.Fone - Screen Unlock

Get Into Locked Apple iPhone SE (2020) In 5 Minutes!

• No special skills are required to get into a locked Apple iPhone SE (2020).
• Unlock the iDevice effectively whether it is disabled or nobody knows its passcode.
• Works properly whether if you’re using Apple iPhone SE (2020), iPad, and iPod touch.
• Fully compatible with the latest iOS.

4,395,216 people have downloaded it

You can watch the video below about how to unlock your Apple iPhone SE (2020) without Password, and you can explore more from Wondershare Video Community .

Step 1. Download Dr.Fone - Screen Unlock, install it on the computer, and launch it whenever you need to unlock your phone. Choose the option of “Screen Unlock” from the main screen.

Step 2. Connect your device with a computer. Afterward, choose the “Unlock iOS Screen”  to get started.

Step 3. Then on the next screen, this tool will prompt you to enter the DFU mode to continue.

Step 4. Provide the essential details about your phone in the next window and Download the firmware update.

Step 5. Wait a moment until the download process is done, and then click on the “Unlock Now” button to activate the process.

Step 6. There will be a warning message showing up. Just confirm it by entering the on-screen code.

Step 7. Let the application resolve the issue on your phone. Once it is done, you will be notified that your lock screen is removed.

Part 2: How to get into a locked Apple iPhone SE (2020) with iTunes?

This is another popular way to resolve the locked out of the Apple iPhone SE (2020) problem. It can get a little complicated to start with, but in the end, your data would be erased. On Mac with macOS Catalina, you need to open Finder. On Windows PC and Mac with other macOS, you can use iTunes. Implement the following steps to restore your Apple iPhone SE (2020).

Step 1. Connect your Apple iPhone SE (2020) to the computer.

Step 2. Enter the Recovery Mode.

• For Apple iPhone SE (2020) 8 and 8 Plus and later: Press and quickly release the ‘Volume Up’ button. Press and quickly release the ‘Volume Down’ button. Keep the Side (Top) button until the Recovery-mode screen appears.
• For Apple iPhone SE (2020) 7 and 7 Plus, iPod Touch (7th generation): Press and hold the ‘Top’ (‘Side’) and ‘Volume Down’ buttons simultaneously. Keep holding until it enters the Recovery mode.
• For iPad with Hom buttons and Apple iPhone SE (2020) 6s and former Apple iPhone SE (2020): Press and hold the ‘Home’ and ‘Side’ (‘Top’) buttons at the same time. Keep holding both buttons until the iTunes symbol would appear on the screen.

Step 3. Click on the “Restore” button. This would reset your device.

Part 3: How to get into a locked Apple iPhone SE (2020) via Find My Apple iPhone SE (2020)?

Apple’s official Find My Apple iPhone SE (2020) is a smart and hassle-free way to locate your lost Apple iPhone SE (2020) or reset it remotely. All you need to remmber is your Apple ID and password. To use this method, preconditions are: Find My Apple iPhone SE (2020) is enabled and internet network is available. Follow these instructions to reset your Apple iPhone SE (2020):

Step 1. Log in to iCloud’s website using your Apple ID and password. Visit the Find My Apple iPhone SE (2020) page and click on the “All Devices” option to view all the iOS devices linked to your Apple ID. Now, select the iOS device that is locked.

Step 2. This will provide various tasks that you can perform on the iOS device. Click on the “Erase Apple iPhone SE (2020)” button to reset the Apple iPhone SE (2020) device.

Part 4: How to get into a locked Apple iPhone SE (2020) with Siri?

If you don’t want to erase your device’s data while resolving this issue, you can use Siri. You should know that this is not an official fix and only works for limited iOS devices (iOS 8.0 to iOS 13). Ideally, it is considered a loophole in iOS, which can be exploited to fix a disabled phone. You can learn how to get in a locked Apple iPhone SE (2020) by implementing the following steps:

Step 1. To activate Siri, please long press your home button on the phone. Ask for the present time (by saying “Hey Siri, what time is it?”) and wait for its response. Now, tap on the clock icon.

Step 2. On the world clock interface, add another clock.

Step 3. The interface will ask you to search for a location of your choice. Type anything on the search tab and select it to get various options. Tap on the “Select all” text.

Step 4. A few added options will be displayed. Tap on “Share” to proceed.

Step 5. Out of all the options to share this text, select the Message app.

Step 6. A new interface will be opened from where you can draft a new message. Type anything in the “To” field and tap “return” from a keyboard.

Step 7. Then the text will be highlighted. Tap on the add icon.

Step 8. This will open another interface to add a new contact. From here, tap on the “Create new contact” option.

Step 9. Instead of adding a contact, tap on the photo icon and select the “Choose Photo” option.

Step 10. This will open the photo library on your phone. Visit an album or wait for a while.

Step 11. Now, press the home button. If nothing goes wrong, then you will enter the Home screen on your phone.

Conclusion

We hope that after learning how to get in a locked Apple iPhone SE (2020) in different ways, you would be able to resolve the issue on your iOS device. Choose the way you prefer and fix the locked out of the Apple iPhone SE (2020) problem. We recommend using Dr.Fone - Screen Unlock to get an easy fix to your issue without much trouble.