8 Safe and Effective Methods to Unlock Your Apple iPhone 6s Plus Without a Passcode

You may get stuck with any emergency if you do not know how to unlock your Apple iPhone 6s Plus/iPad without a passcode. It can happen under various circumstances; let’s say, if you change the passcode too often, you may forget the Apple iPhone 6s Plus passcode later; your spouse may change your passcode without telling you; your naughty child accidentally locks your Apple iPhone 6s Plus. So, what to do then?

Normally, you don’t believe what you see and start to try entering the passcode to unlock your Apple iPhone 6s Plus. However, if you entered an incorrect passcode 10 times, you will receive a messag “iPhone is disabled, connect to iTunes “. In this case, the only way to unlock your disabled iPhone is to restore it. And that is a situation none of us would like to be in right? Hence, in this article, today, we will elaborate ways on how to unlock iPhone without passcode or restore it.

Part 1: Unlocking Your Apple iPhone 6s Plus: What Are the 4 Main Causes of Failure?

Unlocking your Apple iPhone 6s Plus can be a frustrating experience, especially when you just want to access the Apple iPhone 6s Plus device. Unfortunately, there are several common reasons why an iPhone may not unlock.

Before you go ahead and take it to a technician for repair, let’s look at the main causes of why you cannot unlock your Apple iPhone 6s Plus:

• If you input the wrong passcode too many times, your Apple iPhone 6s Plus will be disabled and locked. To unlock iPhone, you will need to enter the correct passcode. If you don’t remember your passcode, you can try using recovery mode to reset your device.
• When someone else has your Apple iPhone 6s Plus passcode, they can easily reset your Apple iPhone 6s Plus passcode. And you have no idea why you cannot access your Apple iPhone 6s Plus. This is a relatively common problem.
• If your Apple iPhone 6s Plus screen is broken, it may be difficult or impossible to unlock the Apple iPhone 6s Plus device. In this case, you may need to take it to an Apple store or authorized service provider to have the screen repaired.
• If your Apple iPhone 6s Plus is in Lost Mode, it will be locked by others, and you will input enter the passcode associated with the Apple ID that was used to set up the Apple iPhone 6s Plus device. If you don’t remember the passcode, then Dr.Fone - Screen Unlock (iOS) will be your ideal choice.

Learn about all the solutions to unlock iPhone quickly through the video below:

safe & secure

For more tutorial videos about how to unlock your Apple iPhone 6s Plus, you can explore more from Wondershare Video Community .

Keep reading to learn more feasible ways to unlock iPhone without passcode in detail!

Part 2: How to Unlock iPhone/iPad Without a Passcode? (iOS 7.0 or later)

Dr.Fone - iPhone Unlocker is a powerful software that can help you open your iDevice without a passcode. It supports all iPhone models from iPhone 6 to iPhone 15, and all iPad models. Dr.Fone-Screen Unlock is easy to use and can be used to bypass the lock screen in just a few simple steps. It can also be used to reset the Apple iPhone 6s Plus device to its factory settings, allowing you to start fresh. In this section, we will learn about this important tool for iPhone lock screen removal. Thus, instead of thinking hard about how to unlock iPhone without a passcode, you can use Dr.Fone - Screen Unlock (iOS) to do the needful.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone Lock Screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone 6s Plus quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

3981454 people have downloaded it

To use Dr.Fone - Screen Unlock to unlock your Apple iPhone 6s Plus or iPad without a passcode, follow these steps:

• Step 1. Download and install Dr.Fone - Screen Unlock (Windows version ) or (Mac Version ) on your computer.

• Step 2. Go to “Toolbox” > “Screen Unlock” > “iOS” > “Unlock iOS Screen”, then connect your Apple iPhone 6s Plus to your PC.

• Step 3. Follow the instructions to put your Apple iPhone 6s Plus into Recovery mode. When your Apple iPhone 6s Plus is in Recovery mode, the software will begin downloading firmware.

• Step 4. When the process is complete, click “Unlock Now”, and Dr.Fone will start unlocking. After a while, your device will be unlocked, and you can access your device without a passcode.

Unlock your Apple iPhone 6s Plus/iPad without a passcode now!

Part 3: The TikTok Method to iPhone Unlocking Without Using a Passcode or Face ID

There has been a viral trend on TikTok about how to unlock your Apple iPhone 6s Plus without using a passcode or your face ID, no matter which iPhone model you use. These themes of videos quickly racked up almost 9 million views.

This method states that it can enter your phone camera or calculator from the control panel, then without face ID unlocks, your phone can be used as normal.

The concrete steps of this TikTok viral method are below if you want to have a try. Maybe that’s a practical way for your emergency:

• Step 1: Swipe down on your control center (if you just want to test this way whether it works or not, cover your camera). If you are on an older iPhone 5, iPhone 6, iPhone 7, or iPhone 8, then swipe up.
• Step 2: Turn off your Wi-Fi, Data and Bluetooth, and Cellular data. Then turn on Aeroplane mode.
• Step 3: Next, you can open up the calculator app, which is also accessible from the Control Center and doesn’t require any password or fingerprint ID.
• Step 4: Please flip the phone horizontally to access the scientific calculator and type in a decimal place: 7 + 4 + EE = 280,000.
• Step 5: Turn your phone sideways to enter scientific mode, press “IN,” then Press “Rand.”
• Step 6: Swipe up on your device, and it’s unlocked.

Now you should unlock iPhone without passcode without computer or iTunes!

You May Also Like:

What To Do If You Bought A Locked iPhone?

Bypass iPhone Lock Screen Using Emergency Call

Unlock iPhone If It Doesn’t Happen With Correct Password

Part 4: Click “Erase iPhone” on the Lock Screen

This method may be a better choice for unlocking your Apple iPhone 6s Plus than using the TikTok method. It is more secure and reliable, but it works on iOS 15.2 or devices with the latest version. This method can unlock iPhone without computer.

• Step 1: Type a wrong passcode on the Lock Screen.
• Step 2: When the message appears, click “Erase iPhone” and click on it.
• Step 3: Enter your Apple ID credentials.
• Step 4: Click “Erase” to confirm that you want to erase your Apple iPhone 6s Plus.
• Step 5: Wait for the process to complete, and your Apple iPhone 6s Plus will be unlocked.

Part 5: Use the Voice Control to Unlock iPhone (iOS 13 or later)

The use of Voice Control to unlock iPhone without passcode is a feature available in iOS 13 or later. Voice Control is a feature that lets you navigate your Apple iPhone 6s Plus using just your voice. It allows you to unlock your Apple iPhone 6s Plus without having to enter a passcode or use Touch ID.

Instead, you can simply say “Hey Siri” followed by a command. Voice Control also allows you to take other actions, such as launching apps and setting reminders.

To use the Voice Control feature to unlock iPhone (iOS 13 or later), you will need to set it up first. To do this, follow these steps:

• Step 1. To set up Voice Control on your Apple iPhone 6s Plus, open the Settings app and tap Accessibility.
• Step 2. Tap Voice Control and then tap Set Up Voice Control.
• Step 3. Follow the on-screen instructions to create a voice profile.

When you’re finished, you can use your voice to unlock your Apple iPhone 6s Plus. To unlock your Apple iPhone 6s Plus:

• Step 1. Say “Hey Siri” followed by “Unlock my iPhone”.
• Step 2. You will then see authenticate using Face ID, Touch ID, or your passcode.
• Step 3. Once you’ve authenticated, your Apple iPhone 6s Plus will be unlocked.

Part 6: How to Unlock iPhone Without a Passcord Using Find My iPhone?

How to unlock iPhone without Siri and passcode using “Find My iPhone” is another method. It just takes several minutes to clean up your device. It securely removes your Apple iPhone 6s Plus lock screen without tapping the passcode. If you want to restore your Apple iPhone 6s Plus data, this is another great method to enable the features in all terms specifically.

You can perform the steps from your Apple iPhone 6s Plus directly to turn on “Find My iPhone.” Follow the below methods for the best result:

• Step 1: Use your computer or someone else’s iOS device, visit icloud.com/find, and sign in with your Apple credentials.

• Step 2: Then, you need to choose the option “All Devices”. If my iPhone is already enabled on your device, you will see your Apple iPhone 6s Plus listed. Simply click on it and choose the option “Erase iPhone.” Then all the data, including the passcode, will be removed from your Apple iPhone 6s Plus. Thus, this process unlocks the Apple iPhone 6s Plus without Siri.

Note: Now, your device will reboot without a passcode. It has a strategy to restore your data and reboot into a new iPhone, thus going for a secret passcode to unlock any iPhone.

Part 7: How to Unlock iPhone Without a Passcode With the Finder or iTunes?

After looking at the maybe-trick way of the TikTok viral method and other unlock ways, an official solution from Apple, we also let you know how to fix the disabled iPhone. This method puts your phone into recovery mode with the help of iTunes or Finder on the computer. However, a small lousy side of this method is that it will erase your data along with the passcode.

Before you start, please ensure you have a computer (Mac or PC). If you’re using a PC, ensure it has Windows 8 or later and that iTunes is installed. Then, just follow the steps below to unlock your Apple iPhone 6s Plus without a password with iTunes.

• Step 1: Turn off your Apple iPhone 6s Plus through the following methods according to your Apple iPhone 6s Plus model.

Notice: If your phone is connected to the computer, please unplug your Apple iPhone 6s Plus.

• Step 2: Get ready by finding the button on your Apple iPhone 6s Plus, as shown in the pictures below. You’ll need to hold in the following step.

• Step 3: Connect your Apple iPhone 6s Plus to the computer where the Finder or iTunes is enabled > Click on iTunes and restore your Apple iPhone 6s Plus.

• Step 4: Choose the Restore option when you see a pop-up. Your computer downloads software for your Apple iPhone 6s Plus and begins the restore process. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, turn off your Apple iPhone 6s Plus, and start again.

Notice: Before the Finder or iTunes restores your Apple iPhone 6s Plus, it will back up the Apple iPhone 6s Plus data in iCloud. Thus, you can download the restored files after the Apple iPhone 6s Plus device restarts.

Now, you have learned how to unlock a disabled iPhone with iTunes.

Part 8: Try DFU Mode to Bypass iPhone Passcode

DFU mode (Device Firmware Update) is a special mode on an iPhone that allows you to install firmware or software updates. It can also be utilized to bypass the passcode on an iPhone. To use DFU mode to bypass the passcode on an iPhone, follow these steps:

• Step 1. Connect your iDevice to your PC and launch the iTunes app.
• Step 2. Switch off your Apple iPhone 6s Plus and press and hold the Home and the Side/Power button for 10 seconds.
• Step 3. Release the Side/Power button, but continue to hold the Home button until iTunes recognizes your Apple iPhone 6s Plus in recovery mode.
• Step 4. When your iDevice is in recovery mode, you can use iTunes to restore your Apple iPhone 6s Plus and bypass the passcode.

Remember that using DFU mode to bypass your Apple iPhone 6s Plus passcode will erase all data from your device.

Part 9: How to Unlock iPhone Without Passcode by Tricking Siri?

In this part, we give you the solution to unlock your Apple iPhone 6s Plus without a password using Siri. You can consider it a trick or a tip as you wouldn’t be losing your Apple iPhone 6s Plus data. It works to give 100% results in even the most tricky situations.

We had a survey for the iOS 10.3.2 and 10.3.3 versions, and Siri certainly ensured one of the best ways to unlock the Apple iPhone 6s Plus without a passcode. It’s a simple way, and with it, you will have the possibility to be capable of posting and reading messages on Facebook using this Siri concept.

Let us go through the steps below to learn about how to unlock iPhone without passcode by Siri:

• Step 1: To enable the Siri feature on your Apple iPhone 6s Plus device, press and hold the home button. It will immediately activate Siri on your Apple iPhone 6s Plus device. Once it gets activated, it is ready to respond to your voice. Now, ask Siri to open the clock to rectify how to unlock a disabled iPhone. Once it displays the clock on your iOS screen, just touch it to proceed.

• Step 2: The World clock appears with the list of tunes you have to select for the alarm clock.

• Step 3: From that option, you will see the tab “buy more tunes” which straight away informs you to reach the iTunes store.

• Step 4: Just click on the home button to go to the phone’s main screen.

You will see that you can now access your Apple iPhone 6s Plus without the passcode as Siri helped unlock iPhone.

Tips: This is only used for iOS 10.3.2 and 10.3.3. If you have updated your iOS system, we recommend you try the previous methods. To make it easier, just use Dr.Fone - Screen Unlock .

FAQs about iPhone Unlock Issues

1. How to unlock iPhone without the Home button?

You can unlock your device without the Home button if you have an iPhone with a Face ID or Touch ID. To unlock iPhone without Home button:

• Step 1: Simply press and hold the Side/Top button along with either the Volume (+ or -) button until the power off slider appears on the screen.
• Step 2: Drag this slider to turn off your Apple iPhone 6s Plus completely.
• Step 3: Once it is off, press and hold the Side/Top button until you see the Apple logo.
• Step 4: This will then unlock your device.

2. How to unlock the Apple iPhone 6s Plus passcode without data loss?

You can’t unlock an iPhone passcode without losing your data, as doing so would require restoring your device to its factory settings. This will erase all of your personal data, including photos, contacts, and any installed apps. You can use iTunes or iCloud to back up your phone before restoring it.

Once you have backed up your device, you can then restore it using the backup information. That’s how to unlock iPhone without passcode.

3. How to unlock iPhone using the camera?

If you have an older version of iOS (version 9 or earlier), then there is a bug that allows you to unlock your device using the camera. To do this, simply open the Camera app and make sure it’s in selfie mode. Then, hold the Home button until you hear a clicking sound. This will unlock your device without requiring a passcode.

The Bottom Line

Dr.Fone - Screen Unlock (iOS) is a well-known featured software to unlock iPhone without passcode and works instantly after download. We have proven results, and all the methods listed above are user-friendly to the extent that no knowledge of technology is required to unlock the Apple iPhone 6s Plus without Siri. We advise you to use Dr.Fone as it will work on your Apple iPhone 6s Plus without any damage and give the desired result. However, you may choose any of the above iOS unlocking methods as you see fit.

3 Ways to Erase Apple iPhone 6s Plus When It’s Locked Within Seconds

Over the last few years, Apple has made remarkable progress with its flagship iPhone series. There are plenty of ways for users to back up, erase, and restore their data. It doesn’t matter if you are moving from one device to another or would like to reset your phone. You should know how to erase iPhone when locked. Too many times, after getting locked out of their device, users find it hard to wipe locked iPhone. If you are also going through the same dilemma, then don’t worry. Read on and learn how to wipe a locked iPhone in this extensive guide.

Part 1: Erase locked iPhone with Dr.Fone - Screen Unlock (iOS)

One of the best ways to wipe locked iPhone is by using Dr.Fone - Screen Unlock (iOS) tool. It is an extremely secure and reliable application. It is already compatible with every leading version of iOS and runs on almost all major iOS devices. Available for both Windows and Mac, the tool can be used to remove activation lock and Apple ID. The tool also provides an easy-to-use interface that can help you reset the activation lock on your device.

Dr.Fone - Screen Unlock (iOS)

Erase the data of an iPhone even if it is locked

• Erase iPhone data together with the lock screen.
• Remove the 4-digit/6-digit passcode, Touch ID, and Face ID , and activation lock.
• A few clicks and the iOS lock screen are gone.
• Fully compatible with all iDevice models and iOS versions.

4,395,216 people have downloaded it

To learn how to erase iPhone when locked, follow these steps:

Step 1. Download and install Dr.Fone.

Start by downloading Dr.Fone - Screen Unlock (iOS) from its official website. Install it on your Windows or Mac and connect your Apple iPhone 6s Plus to the system whenever you wish to resolve an issue with it. After launching the application, click on the “Screen Unlock” option from the welcome screen.

Step 2. Click Start button.

Wait for a while as the application will automatically recognize your phone. Click on the “Start” button to commence the process.

Step 3. Put the phone into DFU mode.

Follow the on-screen instructions to put your phone into the DFU (Device Firmware Update) mode. It can be done by pressing the Home and Power button simultaneously for 10 seconds. Afterward, it would help if you released the Power button while pressing the Home button for another 5 seconds.

Step 4. Download firmware package.

After putting your device into the DFU mode, the application will automatically move to the next window. Here, you would be required to provide essential information related to your phone like device model, firmware update, and more. After filling in the correct information, click on the “Download” button.

Sit back and relax as the application will download the essential firmware update for your phone.

Step 5. Start to unlock.

Once it is done, the application will automatically start resolving the issue on your phone. Make sure that you don’t disconnect your phone while Dr.Fone - Screen Unlock (iOS) will resolve the issue on your device.

Step 7. Unlock completed.

After completing the operation successfully, the interface will provide the following message.

You can check if you can unlock your phone or not. If you still have an issue, then click on the “Try Again” button. Else, you can safely remove your phone and use it without any constraint. By following this method, you would learn how to wipe a locked iPhone with Dr.Fone - Screen Unlock (iOS).

One of the best things about this technique is that you would wipe locked iPhone without causing any damage. Since it is a secure and reliable method with a high success rate, it is sure to provide a hassle-free experience.

Part 2: Erase locked iPhone by restoring it with iTunes

If you are looking for an alternative way to learn how to erase iPhone when locked, you can also take the assistance of iTunes. It provides a free and simple method to restore your device. Since it would wipe your data, you might end up losing your essential files in the process. We recommend following this technique only when you have taken a backup of your data via iTunes beforehand. To learn how to wipe a locked iPhone with iTunes, follow these steps:

1. Firstly, put your Apple iPhone 6s Plus into recovery mode. To do this, launch an updated version of iTunes on your system and connect it to a lightning cable. Now, long-press the Home button on your device and connect it to the other end of the lightning cable. Release the Home button once the iTunes logo would appear.

2. As soon as your phone would be connected, iTunes will recognize an issue with it. From here, you can choose to restore it.

Click here


3. If you don’t get the above pop-up on your screen, launch iTunes and visit its “Summary” section. From here, choose “Restore backup” under the Backup section.

4. agree to the pop-up message by clicking on the “Restore” button.

Part 3: Erase locked iPhone by Find My iPhone

If you haven’t already taken a backup of your phone, then you might find it hard to recover it with iTunes. Another popular way to wipe locked iPhone is by using the Find My iPhone tool. This is mostly implemented in case of a stolen or lost device. One of the best features of Find My iPhone is that it can be used to reset your device remotely. With this, you can protect your personal data without much trouble. Implement these steps to learn how to erase iPhone when locked using Find My iPhone.

1. To start with, log in to your iCloud account and visit the “Find My iPhone” section.

2. Under the “All Devices” section, you can choose the Apple iPhone 6s Plus you wish to reset.

3. After selecting your device, you will be presented with various options. Select the “Erase iPhone” feature to reset your device.

Confirm your choice and wipe locked iPhone remotely using the Find My iPhone feature on iCloud.

After following this informative guide, you would learn how to wipe a locked iPhone without any trouble. Go ahead and pick your preferred option to wipe locked iPhone. We recommend using Dr.Fone - Screen Unlock (iOS) to resolve this issue securely. Though, if you wish to do it remotely, then you can also give Find My iPhone a try as well. If you are familiar with any other reliable method, please let us know how to erase iPhone when locked in the comments below.

How To Fix Auto Lock Greyed Out on Apple iPhone 6s Plus

Auto-lock on iOS devices serves multiple purposes - it conserves battery life, secures your data, and more. But have you encountered the Auto-Lock greyed-out dilemma, fixed at 30 seconds? When this setting becomes inaccessible, it limits your control over screen timeout.

Read on if you’ve encountered a similar problem on your iOS device. In this guide, we’ll explore the possible reasons and offer steps to fix Auto-Lock greyed out on iPhone and iPad devices. If force restarts or settings resets haven’t worked for you, we’ve got alternative solutions. Let’s get started.

Part 1: Why Is Auto-Lock Greyed Out on iOS Device?

There are a few reasons why the Auto-Lock might be greyed out on your Apple iPhone 6s Plus or iPad device, preventing you from adjusting the duration. Here are the most common culprits:

Low Power Mode

When you activate Low Power Mode on your iOS device, you might notice the screen automatically locking after 30 seconds of inactivity. This quick sleep setting, implemented to minimize power usage, explains why the Auto-Lock option appears greyed out and inaccessible.

Screen Time Restrictions

Screen Time restrictions can impact Auto-Lock. For instance, if your downtime schedule blocks all apps, the screen locks itself, even if the Auto-Lock timer hasn’t run out.

MDM Profile Restrictions

If the Auto-Lock is greyed out on your iPad or iPhone and you use it for work or school, a Mobile Device Management (MDM) profile might be the reason. This profile restricts settings, including Auto-Lock. To fix this, contact your IT administrator and ask if they can adjust the MDM profile settings.

Alright, you know the possible reasons why the Auto-Lock option is not working on your iOS device. Still, you might be wondering how to fix the Auto-Lock greyed-out issue. Below are several ways to get your iPad or iPhone Auto-Lock working normally again.

Fix No.1: Disable Low Power Mode

Your iPhone Auto-Lock greyed out because Low Power Mode limits background activities, including the Auto-Lock option. In this mode, you cannot change the Auto-Lock settings. Turn off Low Power Mode to fix this issue and choose your preferred timeout. Here’s how:

• Step 1: Go to your Apple iPhone 6s Plus or iPad’s Settings app.
• Step 2: Scroll down and tap Battery. It will show you your device’s battery usage and available settings.
• Step 3: Turn off the Low Power Mode. Now, the greyed-out Auto-Lock option in Settings should be available again.

Low Battery Mode can stretch your battery life further. But if you need your screen to stay on longer, like while reading an article or watching a video, you can turn it off. It lets you adjust the screen timeout in Settings so it stays awake for as long as you like.

Fix No.2: Check Screen Time Restrictions

You’ve ruled out the Low Power Mode, but the Auto-Lock greyed out on iPad or iPhone remains. If Low Power Mode isn’t causing the problem, your screen time settings might be the issue. Some app restrictions can limit your screen use to specific times, causing it to lock automatically. Resolve this by removing limits, such as downtime and app restrictions, or turning it off.

• Step 1: Open the Settings app on your iOS device.
• Step 2: Go to Screen Time, then scroll down.
• Step 3: Tap Turn Off Screen Time.

Fix No.3: Remove MDM Configuration Profile

A configuration profile is a file that contains settings and restrictions that can be applied to an iOS device. Organizations, schools, or IT administrators often use it to manage devices remotely and enforce specific configurations. Once installed, the settings within a profile override the Apple iPhone 6s Plus device’s default settings. It can include restrictions related to security, network access, app usage, and more.

Since an MDM configuration profile causes limitations, like the greyed-out Auto-Lock on iPad, removing it can be the solution. Doing so frees your iOS device from external settings imposed by the profile. Then, it could allow you to adjust the Auto-Lock time setting as you normally would.

• Step 1: See the configuration profiles you installed on your iOS device.

• Go to Settings> General > VPN & Device Management on your Apple iPhone 6s Plus.

• Go to Settings> General > Profiles & Device Management on your iPad.

• Step 2: Select the configuration profile you need to delete.

• Step 3: Tap Remove Profile, enter your device passcode, then tap Remove.

Fix No.4: Remove Network Settings Installed by MDM

Businesses often use Mobile Device Management (MDM) to remotely manage their employees’ iPhones and iPads. MDM lets IT admins push software updates, restrict apps, and remotely wipe a lost device. This keeps corporate data safe and devices under control, whether the company or the employee owns them.

If you’re having trouble with a greyed-out Auto-Lock timeout setting, disassociating your device from MDM might be an option. But remember, this is a big step. Make sure you follow your company’s authorized procedures to avoid unintended consequences.

If your IT team gives the green light, you might also be able to remove the network settings installed by MDM. Just proceed with caution, as messing with these settings could lead to instability or data loss. Here’s how:

• Step 1: Open the Settings app on your iOS device.
• Step 2: Navigate to General > Profile or VPN & Device Management (or a similar section).
• Step 3: Select the management and tap Remove Management.

If the option is unavailable, only the person who used Apple Configurator 2 or handles your company’s mobile device management platform can remove it.

Fix No.5: Use Dr.Fone To Bypass MDM Lock Without Data Loss

Unfortunately, manually removing profiles can be tricky, especially if they’re associated with MDM, Apple School Manager, or supervised configurations. These often require the removal of passwords, admin privileges, or complete data wipes. But there’s good news. Wondershare Dr.Fone - Screen Unlock (iOS) provides a simpler and safer solution.

Here’s why you should try it:

• **Speedy and Efficient:**No more endless troubleshooting. Dr.Fone bypasses the MDM lock in minutes, saving you precious time.
• **Data Stays Safe:**Unlike factory resets, Dr.Fone keeps all your precious photos, messages, and apps right where they belong.
• **No Jailbreaking:**Say goodbye to complex hacks and warranty voiding. Dr.Fone works without jailbreaking your Apple iPhone 6s Plus, keeping it healthy and secure.
• **Universal Compatibility:**Whether you own the latest iPhone with iOS 17 or an older version, Dr.Fone has your back. It supports all iOS devices and versions starting from iOS 7.0.

Have you ever bought a used iPad or Apple iPhone 6s Plus to find the Auto-Lock option greyed out and isn’t working? Mobile Device Management (MDM) profiles, often deployed by companies or schools, can restrict functionality. If you lack the credentials to bypass or remove it, Dr.Fone can help remove all MDM restrictions on your iOS device. Here’s how:

• Step 1: Download and open Dr.Fone on your computer. Next, connect your Apple iPhone 6s Plus or iPad to the computer using a USB cable and navigate to Toolbox > Screen Unlock > iOS.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

• Step 2: Within the Screen Unlock tool window, select Unlock MDM iPhone.

• Step 3: Select Bypass MDM, then click Get Start to proceed.

• Step 4: Please review the message carefully before initiating the MDM bypass process. Once you’ve read it, click Start to Bypass to proceed.

• Step 5: If prompted, go to your device’s Settings > Apple ID > iCloud and turn off the Find My feature. Next, click OK to initiate the MDM bypass.

• Step 6: The software will display the progress of the bypass. Wait for it to complete.

• Step 7: You’ll see a confirmation message once the bypass is successful. Click Done to exit. Your device should now be free from MDM restrictions.

Fix No.6: Check and Adjust Auto-Lock Settings

Once you’ve tried all the fixes above, you might need to set up the Auto-Lock timeout again.

1. Setup Auto-Lock on iPad

Here are the steps on how to change Auto-Lock on iPad devices:

• Step 1: Within the Settings app, scroll down the list on the left-hand side and tap Display & Brightness.
• Step 2: On the right-hand side of the Display & Brightness screen, tap the Auto-Lock option.

• Step 3: A list of time options will appear, ranging from 2 minutes to 15 minutes, as well as Never. Select the time you want your iPad to wait before automatically locking the screen after inactivity. If you want the screen to stay on indefinitely, choose Never.

Step 4: Once you’ve selected your preferred auto-lock duration, you can exit the Settings app. The change will be applied automatically.

1. Setup Auto-Lock on iPhone

Here’s how to change Auto-Lock on iPhone devices:

• Step 1: Open the Settings app.
• Step 2: Tap on Display & Brightness, scroll down, and tap Auto-Lock.
• Step 3: Choose the desired time interval for your Apple iPhone 6s Plus to automatically lock. The available options typically range from 30 seconds to 5 minutes. You may also have the option to select Never if you prefer to have the screen stay on indefinitely until you manually lock it.

Conclusion

There you have it. This guide has equipped you with the knowledge and solutions to fix the Auto-Lock greyed out on your Apple iPhone 6s Plus or iPad devices. From identifying the reasons like Low Power Mode and MDM configurations to implementing actionable fixes, you can now change your screen timeout. So, turn off those restrictions, remove MDM profiles, and head back to Settings.

For an easy solution, use Dr.Fone Screen Unlock to bypass MDM restrictions, giving you control over your device. Whether it’s a work phone or a personal device under MDM, Dr.Fone can offer an efficient solution. With a few clicks, you’ll have the Auto-Lock back on track, ensuring your iOS device works again just how you want it.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!