8 Safe and Effective Methods to Unlock Your Apple iPhone SE (2020) Without a Passcode

You may get stuck with any emergency if you do not know how to unlock your Apple iPhone SE (2020)/iPad without a passcode. It can happen under various circumstances; let’s say, if you change the passcode too often, you may forget the Apple iPhone SE (2020) passcode later; your spouse may change your passcode without telling you; your naughty child accidentally locks your Apple iPhone SE (2020). So, what to do then?

Normally, you don’t believe what you see and start to try entering the passcode to unlock your Apple iPhone SE (2020). However, if you entered an incorrect passcode 10 times, you will receive a messag “iPhone is disabled, connect to iTunes “. In this case, the only way to unlock your disabled iPhone is to restore it. And that is a situation none of us would like to be in right? Hence, in this article, today, we will elaborate ways on how to unlock iPhone without passcode or restore it.

Part 1: Unlocking Your Apple iPhone SE (2020): What Are the 4 Main Causes of Failure?

Unlocking your Apple iPhone SE (2020) can be a frustrating experience, especially when you just want to access the Apple iPhone SE (2020) device. Unfortunately, there are several common reasons why an iPhone may not unlock.

Before you go ahead and take it to a technician for repair, let’s look at the main causes of why you cannot unlock your Apple iPhone SE (2020):

• If you input the wrong passcode too many times, your Apple iPhone SE (2020) will be disabled and locked. To unlock iPhone, you will need to enter the correct passcode. If you don’t remember your passcode, you can try using recovery mode to reset your device.
• When someone else has your Apple iPhone SE (2020) passcode, they can easily reset your Apple iPhone SE (2020) passcode. And you have no idea why you cannot access your Apple iPhone SE (2020). This is a relatively common problem.
• If your Apple iPhone SE (2020) screen is broken, it may be difficult or impossible to unlock the Apple iPhone SE (2020) device. In this case, you may need to take it to an Apple store or authorized service provider to have the screen repaired.
• If your Apple iPhone SE (2020) is in Lost Mode, it will be locked by others, and you will input enter the passcode associated with the Apple ID that was used to set up the Apple iPhone SE (2020) device. If you don’t remember the passcode, then Dr.Fone - Screen Unlock (iOS) will be your ideal choice.

Learn about all the solutions to unlock iPhone quickly through the video below:

safe & secure

For more tutorial videos about how to unlock your Apple iPhone SE (2020), you can explore more from Wondershare Video Community .

Keep reading to learn more feasible ways to unlock iPhone without passcode in detail!

Part 2: How to Unlock iPhone/iPad Without a Passcode? (iOS 7.0 or later)

Dr.Fone - iPhone Unlocker is a powerful software that can help you open your iDevice without a passcode. It supports all iPhone models from iPhone 6 to iPhone 15, and all iPad models. Dr.Fone-Screen Unlock is easy to use and can be used to bypass the lock screen in just a few simple steps. It can also be used to reset the Apple iPhone SE (2020) device to its factory settings, allowing you to start fresh. In this section, we will learn about this important tool for iPhone lock screen removal. Thus, instead of thinking hard about how to unlock iPhone without a passcode, you can use Dr.Fone - Screen Unlock (iOS) to do the needful.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone Lock Screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone SE (2020) quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

3981454 people have downloaded it

To use Dr.Fone - Screen Unlock to unlock your Apple iPhone SE (2020) or iPad without a passcode, follow these steps:

• Step 1. Download and install Dr.Fone - Screen Unlock (Windows version ) or (Mac Version ) on your computer.

• Step 2. Go to “Toolbox” > “Screen Unlock” > “iOS” > “Unlock iOS Screen”, then connect your Apple iPhone SE (2020) to your PC.

• Step 3. Follow the instructions to put your Apple iPhone SE (2020) into Recovery mode. When your Apple iPhone SE (2020) is in Recovery mode, the software will begin downloading firmware.

• Step 4. When the process is complete, click “Unlock Now”, and Dr.Fone will start unlocking. After a while, your device will be unlocked, and you can access your device without a passcode.

Unlock your Apple iPhone SE (2020)/iPad without a passcode now!

Part 3: The TikTok Method to iPhone Unlocking Without Using a Passcode or Face ID

There has been a viral trend on TikTok about how to unlock your Apple iPhone SE (2020) without using a passcode or your face ID, no matter which iPhone model you use. These themes of videos quickly racked up almost 9 million views.

This method states that it can enter your phone camera or calculator from the control panel, then without face ID unlocks, your phone can be used as normal.

The concrete steps of this TikTok viral method are below if you want to have a try. Maybe that’s a practical way for your emergency:

• Step 1: Swipe down on your control center (if you just want to test this way whether it works or not, cover your camera). If you are on an older iPhone 5, iPhone 6, iPhone 7, or iPhone 8, then swipe up.
• Step 2: Turn off your Wi-Fi, Data and Bluetooth, and Cellular data. Then turn on Aeroplane mode.
• Step 3: Next, you can open up the calculator app, which is also accessible from the Control Center and doesn’t require any password or fingerprint ID.
• Step 4: Please flip the phone horizontally to access the scientific calculator and type in a decimal place: 7 + 4 + EE = 280,000.
• Step 5: Turn your phone sideways to enter scientific mode, press “IN,” then Press “Rand.”
• Step 6: Swipe up on your device, and it’s unlocked.

Now you should unlock iPhone without passcode without computer or iTunes!

You May Also Like:

What To Do If You Bought A Locked iPhone?

Bypass iPhone Lock Screen Using Emergency Call

Unlock iPhone If It Doesn’t Happen With Correct Password

Part 4: Click “Erase iPhone” on the Lock Screen

This method may be a better choice for unlocking your Apple iPhone SE (2020) than using the TikTok method. It is more secure and reliable, but it works on iOS 15.2 or devices with the latest version. This method can unlock iPhone without computer.

• Step 1: Type a wrong passcode on the Lock Screen.
• Step 2: When the message appears, click “Erase iPhone” and click on it.
• Step 3: Enter your Apple ID credentials.
• Step 4: Click “Erase” to confirm that you want to erase your Apple iPhone SE (2020).
• Step 5: Wait for the process to complete, and your Apple iPhone SE (2020) will be unlocked.

Part 5: Use the Voice Control to Unlock iPhone (iOS 13 or later)

The use of Voice Control to unlock iPhone without passcode is a feature available in iOS 13 or later. Voice Control is a feature that lets you navigate your Apple iPhone SE (2020) using just your voice. It allows you to unlock your Apple iPhone SE (2020) without having to enter a passcode or use Touch ID.

Instead, you can simply say “Hey Siri” followed by a command. Voice Control also allows you to take other actions, such as launching apps and setting reminders.

To use the Voice Control feature to unlock iPhone (iOS 13 or later), you will need to set it up first. To do this, follow these steps:

• Step 1. To set up Voice Control on your Apple iPhone SE (2020), open the Settings app and tap Accessibility.
• Step 2. Tap Voice Control and then tap Set Up Voice Control.
• Step 3. Follow the on-screen instructions to create a voice profile.

When you’re finished, you can use your voice to unlock your Apple iPhone SE (2020). To unlock your Apple iPhone SE (2020):

• Step 1. Say “Hey Siri” followed by “Unlock my iPhone”.
• Step 2. You will then see authenticate using Face ID, Touch ID, or your passcode.
• Step 3. Once you’ve authenticated, your Apple iPhone SE (2020) will be unlocked.

Part 6: How to Unlock iPhone Without a Passcord Using Find My iPhone?

How to unlock iPhone without Siri and passcode using “Find My iPhone” is another method. It just takes several minutes to clean up your device. It securely removes your Apple iPhone SE (2020) lock screen without tapping the passcode. If you want to restore your Apple iPhone SE (2020) data, this is another great method to enable the features in all terms specifically.

You can perform the steps from your Apple iPhone SE (2020) directly to turn on “Find My iPhone.” Follow the below methods for the best result:

• Step 1: Use your computer or someone else’s iOS device, visit icloud.com/find, and sign in with your Apple credentials.

• Step 2: Then, you need to choose the option “All Devices”. If my iPhone is already enabled on your device, you will see your Apple iPhone SE (2020) listed. Simply click on it and choose the option “Erase iPhone.” Then all the data, including the passcode, will be removed from your Apple iPhone SE (2020). Thus, this process unlocks the Apple iPhone SE (2020) without Siri.

Note: Now, your device will reboot without a passcode. It has a strategy to restore your data and reboot into a new iPhone, thus going for a secret passcode to unlock any iPhone.

Part 7: How to Unlock iPhone Without a Passcode With the Finder or iTunes?

After looking at the maybe-trick way of the TikTok viral method and other unlock ways, an official solution from Apple, we also let you know how to fix the disabled iPhone. This method puts your phone into recovery mode with the help of iTunes or Finder on the computer. However, a small lousy side of this method is that it will erase your data along with the passcode.

Before you start, please ensure you have a computer (Mac or PC). If you’re using a PC, ensure it has Windows 8 or later and that iTunes is installed. Then, just follow the steps below to unlock your Apple iPhone SE (2020) without a password with iTunes.

• Step 1: Turn off your Apple iPhone SE (2020) through the following methods according to your Apple iPhone SE (2020) model.

Notice: If your phone is connected to the computer, please unplug your Apple iPhone SE (2020).

• Step 2: Get ready by finding the button on your Apple iPhone SE (2020), as shown in the pictures below. You’ll need to hold in the following step.

• Step 3: Connect your Apple iPhone SE (2020) to the computer where the Finder or iTunes is enabled > Click on iTunes and restore your Apple iPhone SE (2020).

• Step 4: Choose the Restore option when you see a pop-up. Your computer downloads software for your Apple iPhone SE (2020) and begins the restore process. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, turn off your Apple iPhone SE (2020), and start again.

Notice: Before the Finder or iTunes restores your Apple iPhone SE (2020), it will back up the Apple iPhone SE (2020) data in iCloud. Thus, you can download the restored files after the Apple iPhone SE (2020) device restarts.

Now, you have learned how to unlock a disabled iPhone with iTunes.

Part 8: Try DFU Mode to Bypass iPhone Passcode

DFU mode (Device Firmware Update) is a special mode on an iPhone that allows you to install firmware or software updates. It can also be utilized to bypass the passcode on an iPhone. To use DFU mode to bypass the passcode on an iPhone, follow these steps:

• Step 1. Connect your iDevice to your PC and launch the iTunes app.
• Step 2. Switch off your Apple iPhone SE (2020) and press and hold the Home and the Side/Power button for 10 seconds.
• Step 3. Release the Side/Power button, but continue to hold the Home button until iTunes recognizes your Apple iPhone SE (2020) in recovery mode.
• Step 4. When your iDevice is in recovery mode, you can use iTunes to restore your Apple iPhone SE (2020) and bypass the passcode.

Remember that using DFU mode to bypass your Apple iPhone SE (2020) passcode will erase all data from your device.

Part 9: How to Unlock iPhone Without Passcode by Tricking Siri?

In this part, we give you the solution to unlock your Apple iPhone SE (2020) without a password using Siri. You can consider it a trick or a tip as you wouldn’t be losing your Apple iPhone SE (2020) data. It works to give 100% results in even the most tricky situations.

We had a survey for the iOS 10.3.2 and 10.3.3 versions, and Siri certainly ensured one of the best ways to unlock the Apple iPhone SE (2020) without a passcode. It’s a simple way, and with it, you will have the possibility to be capable of posting and reading messages on Facebook using this Siri concept.

Let us go through the steps below to learn about how to unlock iPhone without passcode by Siri:

• Step 1: To enable the Siri feature on your Apple iPhone SE (2020) device, press and hold the home button. It will immediately activate Siri on your Apple iPhone SE (2020) device. Once it gets activated, it is ready to respond to your voice. Now, ask Siri to open the clock to rectify how to unlock a disabled iPhone. Once it displays the clock on your iOS screen, just touch it to proceed.

• Step 2: The World clock appears with the list of tunes you have to select for the alarm clock.

• Step 3: From that option, you will see the tab “buy more tunes” which straight away informs you to reach the iTunes store.

• Step 4: Just click on the home button to go to the phone’s main screen.

You will see that you can now access your Apple iPhone SE (2020) without the passcode as Siri helped unlock iPhone.

Tips: This is only used for iOS 10.3.2 and 10.3.3. If you have updated your iOS system, we recommend you try the previous methods. To make it easier, just use Dr.Fone - Screen Unlock .

FAQs about iPhone Unlock Issues

1. How to unlock iPhone without the Home button?

You can unlock your device without the Home button if you have an iPhone with a Face ID or Touch ID. To unlock iPhone without Home button:

• Step 1: Simply press and hold the Side/Top button along with either the Volume (+ or -) button until the power off slider appears on the screen.
• Step 2: Drag this slider to turn off your Apple iPhone SE (2020) completely.
• Step 3: Once it is off, press and hold the Side/Top button until you see the Apple logo.
• Step 4: This will then unlock your device.

2. How to unlock the Apple iPhone SE (2020) passcode without data loss?

You can’t unlock an iPhone passcode without losing your data, as doing so would require restoring your device to its factory settings. This will erase all of your personal data, including photos, contacts, and any installed apps. You can use iTunes or iCloud to back up your phone before restoring it.

Once you have backed up your device, you can then restore it using the backup information. That’s how to unlock iPhone without passcode.

3. How to unlock iPhone using the camera?

If you have an older version of iOS (version 9 or earlier), then there is a bug that allows you to unlock your device using the camera. To do this, simply open the Camera app and make sure it’s in selfie mode. Then, hold the Home button until you hear a clicking sound. This will unlock your device without requiring a passcode.

The Bottom Line

Dr.Fone - Screen Unlock (iOS) is a well-known featured software to unlock iPhone without passcode and works instantly after download. We have proven results, and all the methods listed above are user-friendly to the extent that no knowledge of technology is required to unlock the Apple iPhone SE (2020) without Siri. We advise you to use Dr.Fone as it will work on your Apple iPhone SE (2020) without any damage and give the desired result. However, you may choose any of the above iOS unlocking methods as you see fit.

How Many Attempts To Unlock Apple iPhone SE (2020)

Unlocking your Apple iPhone SE (2020) involves a delicate balance to avoid pitfalls. Knowing how many attempts to unlock an iPhone is vital due to Apple’s security measures. Exceeding the limit triggers consequences, such as temporary disablement or even data erasure.

These restrictions highlight the need to learn how many attempts for iPhone passcodes are allowed before facing potential data loss. When dealing with failed passcode attempts, exploring methods for successful access is essential. Let’s delve into the intricacies of iPhone passcode security and unveil strategies for a seamless unlocking process. Read on to learn more.

Part 1. How Many Times Until the Apple iPhone SE (2020) Is Permanently Disabled?

Unlocking an iPhone involves a series of attempts, each with distinct consequences. Here’s a breakdown of how many failed passcode attempts on an iPhone you can do before it locks you out:

First 5 Attempts

• No significant consequences.
• Users have the flexibility to enter their passcode without any penalties.

6th Attempt

• iPhone is disabled for 1 minute.
• An iPhone is Disabled message appears on the screen.

7th Attempt

• Disabled for 5 minutes.
• The same on-screen message persists, but the Apple iPhone SE (2020) enforces a longer wait time.

8th Attempt

• Disabled for 15 minutes.
• Users must wait before attempting again. The escalating time delay discourages brute-force attacks.

9th Attempt

• Disabled for 60 minutes.
• A considerable waiting period is imposed. It increases the frustration for unauthorized users attempting to gain access.

10th Attempt

• iPhone is disabled.

Two things can happen on the tenth failed attempt to unlock your Apple iPhone SE (2020). If you have Erase Data enabled, your phone’s data gets wiped. If it’s disabled, the Apple iPhone SE (2020) is permanently locked, requiring a connection to iTunes for restoration. It’s crucial to back up your data on iCloud or locally to avoid permanent loss.

Part 2. What Are the Consequences After Consecutive Failed Attempts?

When you exceed ten unsuccessful passcode entries, the Apple iPhone SE (2020) device takes stringent actions to protect sensitive data. It can initiate a data wipe or lock the iPhone, needing a connection to iTunes for restoration. After a series of failed attempts, the Apple iPhone SE (2020) can activate a security measure often referred to as a “self-destruct” mode.

To turn this mode on or off, follow these steps:

How To Enable Erase Data Mode

Safeguard your personal information with these simple steps to remotely wipe your device in case of loss or theft.

• Step 1: Go to Settings > Face ID & Passcode or Touch ID & Passcode, depending on your device. Enter your current passcode.

• Step 2: Scroll down and find the Erase Data option. Toggle the button to activate the feature.

How To Disable Erase Data Mode

Here are the steps to disable Erase Data Mode on your Apple iPhone SE (2020), ensuring controlled access to your device.

• Step 1: Follow the same steps to access the Erase Data toggle. Next, disable the toggle to turn off this feature.
• Step 2: Confirm your choice, ensuring the “self-destruct” mode is deactivated to prevent accidental data loss.

Part 3. Top 5 Methods To Unlock an iPhone After Too Many Attempts

When wondering how many tries to unlock an iPhone, consider the following methods to restore functionality. The section below explores the most effective ways to regain access to your device. Let’s start with the use of a dedicated screen unlock tool.

Method 1: Using a Dedicated Screen Unlock Tool

When facing a disabled iPhone, Wondershare Dr.Fone - Screen Unlock (iOS) stands out as a reliable solution. It’s a comprehensive platform that unlocks iOS devices without a passcode. Here are some of the tool’s key features to help you get started:

• Removes all types of lock screens. Fone Screen Unlock tackles various lock screen types, like pattern lock, etc. It offers a comprehensive solution for different scenarios.
• Unlock Apple ID without a password. The tool provides a secure method to unlock Apple ID without needing a password.
• No data loss. Users can regain access without losing data, a crucial aspect of dealing with a disabled iPhone.
• High success rate.Fone Screen Unlock boasts a high success rate, instilling confidence in users seeking a swift and effective solution.

How To Unlock iPhone With Dr.Fone

After many failed passcode attempts on your Apple iPhone SE (2020),Dr.Fone can help you access it again in no time. Follow the steps:

• Step 1: Download and install Dr.Fone on your computer. Next, click Toolbox > Screen Unlock > iOS to start. In the next window, choose Unlock iOS Screen.

• Step 2: Follow the on-screen instructions. Dr.Fone will automatically detect your Apple iPhone SE (2020) model. If necessary, choose the System Version according to your preference. Next, click Start to start the iOS firmware download.

• Step 3: Wait for the iOS firmware to download successfully. Click on Unlock Now to initiate the unlocking process. Follow the on-screen instructions again and wait for Dr.Fone to unlock your device. If unsuccessful, click on the Try again option.

Method 2: Using iTunes To Unlock a Locked or Disabled iPhone

An alternative method to unlock your Apple iPhone SE (2020) when locked or disabled involves using iTunes. Note that if your iTunes is not synchronized with the iPhone, you risk losing your existing data. Here’s how:

• Step 1: Launch iTunes on your computer. Connect your locked iPhone using a cable and let iTunes identify the Apple iPhone SE (2020) device. Next, navigate to the Summary section and select the Restore iPhone option.

• Step 2: Allow iTunes to identify your device. Start the restoration of previous data by selecting Restore Backup. Your Apple iPhone SE (2020) will be unlocked with all the associated data if you have backed up your information on iTunes. Otherwise, you will need to set it up as a new iPhone.

Method 3: Using Recovery Mode To Unlock a Locked or Disabled iPhone

Activating Recovery mode is another useful method for accessing a locked phone. The approach erases all data on the phone, restoring it to factory settings. Any data not backed up will be lost using this method. Follow the steps:

• Step 1: Download and Launch iTunes on your computer. Connect your Apple iPhone SE (2020) with a USB cable.
• Step 2: For iPhone 8 models or newer, press and release the volume up button, followed by the volume down button. Next, press and hold the power button. If executed, the iTunes connect screen will appear. For earlier iPhone models, you can refer to here.

• Step 3: iTunes will prompt you to either restore or update your Apple iPhone SE (2020). Choose the Restore iPhone option to reset your device to its factory settings. If the restoration process extends beyond 15 minutes and your Apple iPhone SE (2020) exits recovery mode, you’ll need to repeat the steps.

Method 4: Using iCloud To Unlock a Lock or Disabled iPhone

After **many failed passcode attempts on your Apple iPhone SE (2020)**，it got disabled, but iCloud offers a convenient solution. Your phone must have the Find My iPhone option enabled for the method to work. You should be aware of the Apple ID password associated with your iCloud account. Once these prerequisites are fulfilled, access the iCloud account from another device. Here’s how.

• Step 1: Go to iCloud.com using another device, such as a computer, and log in with your Apple ID and password.

• Step 2: Select All Devices, and pick the locked iPhone from the dropdown menu. Once you’ve chosen the Apple iPhone SE (2020) device, click the Erase iPhone icon in the lower-right corner. Although the action deletes the data on the phone, you can retrieve it from your iCloud backup once the Apple iPhone SE (2020) device is operational again.

Method 5: Contact Apple Support or Visit an Apple Store

If all methods fail or you don’t have access to Dr.Fone, consider contacting Apple Support. You can also try visiting an Apple Store. Apple experts will guide you through the appropriate steps based on your unique situation.

Conclusion

If you are wondering how many passcode attempts on iPhone will lock your device and not sure how to fix this issue, here is the way to go. Methods like iTunes, Recovery Mode, iCloud, or seeking Apple Support all offer potential solutions.

Consider using Dr.Fone Screen Unlock (iOS) for a secure and data-preserving unlock. It safeguards your data even if you forget your passcode. Remember that surpassing the allowed attempts could result in data loss or permanent device disablement. Safeguard your data wisely by exploring these methods.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Did Your Apple iPhone SE (2020) Passcode Change Itself? Unlock It Now

The Apple iPhone SE (2020) changing passcodes itself is not a commonly reported issue, but it surely can happen to anyone. While the reasons are uncertain, the issue can be resolved without putting much strain on your device. If you face this iPhone passcode changed itself issue by any chance, it makes it hard for you to get into your Apple iPhone SE (2020).

However, you don’t need to worry, as this well-organized guide provides authentic methods to solve this issue. You will also find a bonus tool to fix your iPhone/iPad passcode changed itself issue without any need of knowledge.

Part 1. What Are the Reasons for iPhone Passcode Changing by Itself

Before solving the Apple iPhone SE (2020) or iPad passcode changed itself issue, you should know the actual reason behind it. Here are some points that precisely explain why the Apple iPhone SE (2020) changed its passcode by itself:

1. Frequent iOS Updates: One major issue that can cause the problem of iPhone passcodes changing by itself is the ongoing iOS updates. An update can sometimes cause major glitches in the Apple iPhone SE (2020) device, which might automatically change the credentials.
2. iOS System Error: Many users are reportedly known for installing and using the Beta version of iOS on their iPhones/iPads. These versions are known to hold major glitches and bugs in the software. Usually, the Apple iPhone SE (2020) changing passcode issue is normally reported by users under such scenarios.
3. Malware: Malicious apps can damage your system security and make your iOS device change the passcode automatically. This can either happen due to device hacking or system security breaches.

Part 2. [The Simplest Solution] Remove iPhone Passcodes With Wondershare Dr.Fone

There are multiple ways to resolve the “iPhone changed passcode itself” issue, but they can be consistently difficult. Here, Wondershare Dr.Fone provides the simplest solution to fix your Apple iPhone SE (2020) without putting any effort. When fixing your Apple iPhone SE (2020)’s screen locks, Wondershare Dr.Fone caters to different scenarios. From Touch ID to Face ID and other basic screen locks, this tool unlocks it within minutes.

It clearly shows that you can easily get yourselves out of the miserable iPhone changed passcode itself issue. This is not only what Wondershare Dr.Fone offers its users. You can also find a high success rate for unlocking carrier and MDM locks.

Key Features of Wondershare Dr.Fone

1. Wondershare Dr.Fone is compatible with all iOS devices up to iOS 17, which allows everyone to get help using its advanced functionality.
2. If you lose access to your Apple ID, it can bypass the iCloud Activation Lock and help you set up your iOS device like a new one.
3. Without damaging the data, Wondershare Dr.Fone allows you to remove the iTunes backup encryption . This allows you to back up, restore, transfer, or easily wipe out your device’s data.

Comprehensive Guide To Unlock Screen Using Wondershare Dr.Fone

Wondershare Dr.Fone provides the simplest solution to unlock your Apple iPhone SE (2020) and remove the passcode change issue. Follow this step-by-step guide to complete the screen unlocking process without wasting any time:

• Step 1. Start Tool and Choose Screen Unlock Function

Initially, launch Wondershare Dr.Fone on your computer and connect it to your concerned iPhone. Go into the “Toolbox” and choose the “Screen Unlock” function from the given options. Next, select “iOS” to run the process for the iOS device. Choose the “Unlock iOS Screen” option and hit the “Start” button to initiate the unlocking process.

• Step 2. Put Your Apple iPhone SE (2020) in Recovery Mode and Confirm Status

After that, follow the on-screen instructions to put your Apple iPhone SE (2020) in the Recovery Mode. In the next window, you can see your device model recognized. Then, enter your “System Version” and hit the “Start” button again to continue.

• Step 3. Download iOS Firmware and Confirm

Then, the system starts downloading the required iOS firmware according to your Apple iPhone SE (2020) model. Once the download is complete, click “Unlock Now” to implement the screen unlocking process. Enter the code in the confirmation box in the next window and choose the “Unlock” option.

• Step 4. Install iOS Firmware To Unlock Completely

After that, you can see a progress bar of the unlocking screen process. Then, it takes you to the next window after completion, where you click the “Done” button to accomplish the process.

Part 3. Set Up the Apple iPhone SE (2020) device Again Using the Security Lockout Procedure

Security Lockout or “iPhone Unavailable” happens when you attempt a wrong passcode 10 times. From there, you need to erase all your Apple iPhone SE (2020) data to regain access to the iOS device again.

While there is no direct way to regain access to your device when its passcode changes, you will have to perform a factory reset on your Apple iPhone SE (2020) to make it reusable. For that, look through the comprehensive guide on how to take your device out of this state:

• Step 1. After getting your iOS 17 device into the “iPhone Unavailable” stage, tap the “Forgot Passcode?” option in the bottom right corner.
• Step 2. To start the Apple iPhone SE (2020) reset, you need to tap on the “Start iPhone Reset.” Then, enter your Apple ID password in the given box and sign out your Apple ID. If you have an eSIM, you will be prompted with an option. Select the “Keep eSIM and Erase Data” or the “Delete eSIM and Erase Data” option according to your choice.

In another case, Apple allows you to temporarily sign in to your Apple iPhone SE (2020) using a recently changed passcode within 72 hours. But once you get into your device, set a new passcode immediately to retain your full access.

Part 4. Using iTunes To Set Up iOS Device Again

iTunes service allows you to reset your Apple iPhone SE (2020) to factory settings and unlock the screen lock if the Apple iPhone SE (2020) passcode changes on its own. Using iTunes to set up your Apple iPhone SE (2020) again is a good and safe method, but it removes your device data. If you can compromise losing data, you can follow these instructions to remove the Apple iPhone SE (2020) Passcode Changed Itself issue using iTunes:

Instructions. Firstly, launch iTunes on your desktop and connect your Apple iPhone SE (2020). Then, you need to progress into putting your Apple iPhone SE (2020) in the Recovery Mode . Continuing this, iTunes detects your device in Recovery Mode and shows two options: “Update” or “Restore.” Click on the “Restore” option and hit the “OK” button to restore your Apple iPhone SE (2020) and regain access.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ 

Part 5. Using iCloud To Set Up iOS Device Again

Using iCloud to unlock iOS devices is a safe and recommended method, but it also leads to complete data loss. If you wish to consider using the iCloud method, it is important for the Find My service to be active on the Apple iPhone SE (2020) device. Also, you need to be aware of your Apple ID and password before proceeding. Follow this comprehensive guide step-by-step to set up your iOS device again using iCloud.

• Step 1. First of all, open iCloud on your desktop web browser. Afterward, enter your “Apple ID” and “Password” to proceed. After trusting the Apple iPhone SE (2020) device, look for the “Grid” icon on the top right to find the “Find My” option in the list.

• Step 2. After that, choose the Apple iPhone SE (2020) device that you want to recover. Then, click the “Erase This Device” option to remove data and regain your device access.

Part 6. Using Find My App To Set Up iOS Device Again

This method needs you to have another iOS device signed into the same Apple ID with the Find My option enabled. After fulfilling these preconditions, you can follow these steps to set up your device whose iPhone passcode changed from 4 to 6 digits by itself:

• Step 1. Launch the Find My App on any other device, select the “Devices” tab from the bottom menu, find your locked iPhone in the list, and tap on that.
• Step 2. You must select the “Erase This Device” button to remove it from the iCloud account. This will instantly factory reset the Apple iPhone SE (2020) device as if it is a new iOS device.

Bonus Tip. How To Change Passcode on iPhone: A Simple Guide

We’ve discussed various reasons why the iPhone passcode changed itself above. However, there are several instances where you want to change the passcode yourself. What to do if you are looking for an effective way to change your Apple iPhone SE (2020)’s passcode? Follow the simple step-by-step guide to change the passcode from the iDevice’s “Settings:”

• Step 1. First, open iPhone “Settings” and go to the “Face ID & Passcode” option to access the Apple iPhone SE (2020) device’s security settings.

• Step 2. After that, tap “Change Passcode” and enter your six-digit passcode to see passcode options. Open “Passcode Options” and set a four-digit passcode easily or vice versa.

Conclusion

In this article, we’ve gone through the scenario of iPhone/iPad passcode changing itself due to system glitches. To fix this problem, we have introduced some effective and reliable methods with simple steps. However, Wondershare Dr.Fone is the recommended tool to bypass this issue because it provides a high success rate with an easy-to-follow system.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!