Can You Unlock iPhone 13 After Forgetting the Passcode?

Can You Unlock Apple iPhone 13 After Forgetting the Passcode?

If you forget the passcode on your Apple iPhone 13, you won’t have the option to access its information and use it flawlessly. What’s more disturbing is that if you keep entering the wrong ones, your Apple iPhone 13 will be locked. It would help if you opened it, be it a 4-digit passcode, 6-digit passcode, Fingerprint, or Face ID.

If you forgot passcode on iPhone, the main thing you can do with your iDevice is to make an Emergency call. You should erase your Apple iPhone 13 if you don’t remember your screen unlock code. But don’t worry; we have many solutions available here. Keep reading to learn about the best tool, i.e., Dr.Fone, for screen unlock.

Part 1: Can I Unlock My iPhone When I Forgot Passcode?

Yes, you can unlock your locked iPhone without a passcode. If you forgot passcode on iPhone, Apple’s proper prescribed way is to reset your Apple iPhone 13. In other words, do a factory reset to erase the passcode. However, many individuals can’t do this strategy since it’s irksome and may lead to a few unforeseen issues. Such issues can worsen the condition.

Therefore, we have introduced some alternate ways to unlock your iDevice. You can even use an expert tool to remove this issue. Keep following us to find out more about our recommended methods.

1. Use Find My

Utilizing iCloud if the Find My feature is enabled before you forgot iPhone passcode. By visiting iCloud.com, you can erase your Apple iPhone 13 from a distance. Moreover, you can eliminate the Apple iPhone 13 device’s screen lock to unlock it.

To erase the passcode using the Find My feature on iCloud:

Step 1. Go to iCloud.com and enter your Apple account credentials and log in to your account.

Step 2. Pick “Find iPhone” and go to “All Devices” > “Erase iPhone”.

2. Use Recovery Mode with iTunes

How to bypass the Apple iPhone 13 passcode or eliminate the passcode? The method is to utilize iTunes. However, using iTunes to restore the Apple iPhone 13 in recovery mode will erase all data from the Apple iPhone 13 device.

It will wipe out the iDevice. Therefore, you must back up your data to restore it later. Without any backup accessible, you will permanently lose everything on the iDevice.

Additionally, ensure you remember the Mac ID credentials on the iDevice, or you won’t be able to use it. Finally, utilizing iTunes will eliminate the lock screen’s passcode but not the firmware. Considering all these, bypassing a passcode isn’t so hard. Here’s how to bypass the Apple iPhone 13 passcode with iTunes:

Step 1. Enter the recovery mode on your Apple iPhone 13, iPad, or iPod Contact.

On iPhone 8/8 Or later: Hold the Power/Side button on your phone and one of the volume buttons. Keep holding until the power off slider shows up. Flip the slider to switch off the iPhone. Next, press and hold the power button and connect your Apple iPhone 13 to the PC. Hold the button until the Apple iPhone 13 transforms into the recovery mode screen.
On iPhone 7/7 Or Below: Press and hold the power button until you see the slider. Flip the slider to switch off the iPhone. Press the Volume Down button and connect the Apple iPhone 13 to the PC. Continue to hold the button until you see the recovery mode screen.

Step 2. Restore your Apple iPhone 13.

After connecting your Apple iPhone 13 to the PC, you will see a popup window in iTunes saying, “There is an issue with the ‘iPhone name’ that needs it to be restored.” In that window, select “Restore” to erase the iPhone. (If iTunes doesn’t run, open iTunes by double tapping it.)

Step 3. Set up iPhone.

Hang tight for the process to wrap up. Then, a short time later, go to your Apple iPhone 13 and follow the on-screen directions to set up and utilize your phone again.

3. “Erase iPhone” Option

However long the locked iPhone has a functioning WiFi connection, you can now delete the Apple iPhone 13 device from the lock screen. This method only works if it is running iOS 15.2 or above.

After several wrong attempts, an “Erase iPhone” choice will appear on the screen’s lower part. Just tap on that, confirm you need to erase the Apple iPhone 13 and enter your Apple ID details afterward. The device will then reset itself, completely deleting all data and beginning as a new one.

If the Apple iPhone 13 device can’t connect to WiFi or data, the Apple ID approval step will fail. Then the Apple iPhone 13 cannot be erased, and you will need to turn to the conventional DFU strategy.

4. Use Siri

You can also use Siri to bypass the Apple iPhone 13 passcode. Using Siri to erase the lock is an iPhone hack existing on iOS devices running iOS 8.0 to iOS 10.1. You can utilize Siri to bypass your Apple iPhone 13 passcode by switching off cellular data. You also need to read a new message and set a reminder, and that’s just the beginning.

That is an indirect method for bypassing a forgotten passcode on iPhone. In any case, it is just available on a few iOS variants.

To erase the lock screen passcode with Siri on iOS 8 to iOS 10.1:

Step 1. Press and hold the “Home” button to actuate Siri on your Apple iPhone 13.

Step 2. Advise Siri to set a reminder.

Step 3. Tap the recently added reminder to open the “Reminders” application.

Step 4. Click the “Home” button and go to the Home screen. Presently you have effectively bypassed the lock screen.

As you might be aware, this way is helpful because of iOS bugs. This method is also viewed as a method for hacking the iPhone. In later iOS versions, Apple fixed these bugs. In this manner, it works on iPhones running iOS 8.0 to 10.1.

5. Dr.Fone-Screen Unlock

The Apple iPhone 13 unlock software Dr.Fone-Screen Unlock will help to open the password without iTunes. It is well-versed in unlocking screen locks from various iOS devices, including the iPhone, iPad, and iPod contact. With it introduced on your PC, you can eliminate your Apple iPhone 13 lock screen effectively. It can remove the 4-digit password, 6-digit password, Fingerprint, or Face ID.

Therefore, Dr.Fone is a decent option if you like to sidestep the passcode on your Apple iPhone 13 without Siri or iTunes. To fix more issues, such as bypassing the enactment lock without the past proprietor, Dr.Fone-Screen Unlock will be a decent option for you. The following steps illustrate how you can unlock your lock screen passcode:

Step 1. Connect your Apple iPhone 13/iPad

Open the Dr.Fone program on your PC and select “Screen Unlock” among all the options from the home page.

Connect your iOS device to the PC through a USB connector. Then, at that point, click the “Unlock iOS Screen” option on the screen.

Step 2. Boot iPhone in Recovery or DFU mode

Before sidestepping the Apple iPhone 13 lock screen, we want to boot it in Recovery or DFU mode by adhering to the on-screen directions. Therefore, the Recovery mode is suggested for the iOS lock screen. Yet, if you can’t actuate the Recovery mode, you can also use the DFU mode.

Step 3. Affirm iOS device information

After putting the Apple iPhone 13 device in DFU mode, Dr.Fone will show the Apple iPhone 13 device information, for example, the Apple iPhone 13 device Model and OS Variant. You can choose the correct data from the dropdown menu if the information is incorrect. Then, at that point, click Download to download the firmware for your device.

Step 4. Unlock the Apple iPhone 13 screen lock

After the firmware is downloaded effectively, click Unlock Now to begin unlocking your Apple iPhone 13/iPad.

Simply shortly, your Apple iPhone 13 will be unlocked effectively. Note that this unlocking process will wipe the user data on your Apple iPhone 13. However, it is practical to erase this issue from your device.

Part 3: How Can I Turn Off/On My Passcode?

Open your Settings application and look down until you track down the choice for the password menu. On iPhones with a home button, this will be named “Fingerprint and Password.” On new ones, it is “Face ID and Password.” Click this choice.
Enter your current password.
Look down until you track the “Turn Passcode Off” choice and tap it.

Click again to agree with your decision to turn off your passcode.

The Bottom Line

Indeed, if you forgot the passcode on the iPhone, there are a few ways to get into your phone again. However, the best way is to use professional software to do the task for you. Therefore, we strongly suggest you install the Wondershare Dr.Fone-Screen Unlock software. It is a security tool and worth trying when you forgot iPhone passcode. So download it today for a quick unlocking experience.

How to Make the Most of Your Apple iPhone 13 Lock Screen with Notifications?

The Apple iPhone 13 lock screen has certainly changed a lot over the last few updates of iOS. Not only it provides an added security to the Apple iPhone 13 device, but with iPhone lock screen notifications, we can also save our time and efforts. With the introduction of iOS 18, we can also see a change in iPhone lock screen with notifications as well. To help you make the most out of lock screen notifications iPhone, we have come up with this ultimate guide. Read on and know all sorts of things you can do with iPhone notification lock screen.

Part 1: How to use iPhone lock screen notifications?

When it comes to iPhone lock screen with notifications, there are so many things that you can do. For instance, here are a handful of things you can do with iPhone lock screen notifications.

Reply to messages quickly

If you aren’t using this iPhone notification lock screen feature, then you are certainly missing out on something. You might already know that you can get a preview of messages on your home screen. Simply long press it (or 3D Touch) to interact with it. From here, you can reply to your messages without unlocking your device.

Interact with apps without unlocking your phone

Not just your messages, you can interact with other apps as well right from the lock screen notifications iPhone. After getting a list of notifications, you can simply tap on the “x” button to close them.

Though, if you want to know more, then just long press the notification. For instance, if you have got a notification for an email, then you can get various options just by long pressing it.

Search for anything

Besides interacting with widgets and apps, you can also search for something on your device and that too without unlocking it. Simply tap on the search bar to make it work.

Part 2: How to turn off notifications on iPhone lock screen?

Sometimes, people can access our private information just by looking at our notifications. In this way, they can get read your crucial information and that too without unlocking your device. By simply visiting your device’s settings, you can customize iPhone lock screen with notifications. In this way, you can turn on or off iPhone lock screen notifications for the apps of your choice.

1. Unlock your device and go to its Settings > Notifications to access all the features related to its notifications.

2. From here, you can view a list of all the apps that can access notifications.

3. Simply tap on the app of your choice (Mail, Message, Photos, iTunes, etc).

4. From here, turn off the option of “Allow Notification” to completely turn off the notifications for the app.

5. If you simply want to turn off notifications on lock screen, then switch off the option of “Show on Lock Screen”.

Besides that, there are a few other options as well that you can either enable or disable to customize your lock screen notifications iPhone.

Part 3: How to turn off notification view on iPhone lock screen?

The notification view can be used to see previous notifications on the Apple iPhone 13 device without unlocking it. Needless to say, most of the users don’t like to include this iPhone notification lock screen feature. To turn off the notification view of iPhone lock screen notifications, follow these steps:

1. Firstly, unlock your device and got to its Settings > Touch ID & Passcode option.

2. You would be needed to provide the passcode or your fingerprint in order to access these settings.

3. This will provide a list of features related to your passcode. Go to the section of “Allow Access When Locked”.

4. From here, make sure that the option of “Notification View” is turned off.

After turning the option off, you can exit from the Settings interface. In this way, your device won’t display the notification view.

Part 4: Changes on iPhone lock screen notifications on iOS 18

With the new update of iOS 18, we can see a drastic change in the Apple iPhone 13 lock screen notifications as well. Since the Apple iPhone 13 lock screen with notifications have been integrated into one, it becomes quite easier for users to access it.

Access iPhone notification lock screen on iOS 18

Some people find it a little tricky to access the lock screen notifications iPhone after the iOS 18 update. Instead of sliding the screen from the top, you need to swipe it from the middle. By swiping it from the bottom, you might get its control center.

Simply swipe up from the middle of the screen to get a list of all the notifications. Now, you can slide them to access the old notifications.

Nevertheless, you can swipe from the top to access the cover sheet.

Swipe left or right

This is undoubtedly one of the most evident new features of the Apple iPhone 13 notification lock screen of iOS 18. Now, you can swipe left or right to access various features. By swiping left, you can access the Camera on your device and by swiping right, you can access your Today View.

If you want to click pictures instantly, then simply swipe left the lock screen. This will launch the Camera on your device, letting you click pictures on the go. Similarly, by swiping right, you can access your Today View. This includes vital data from apps and widgets that your smartphone assumes is important for you regarding the day.

We hope that after following this guide, you would be able to gain in-depth information regarding iPhone lock screen with notifications. Apart from all the basic things you can do on the lock screen, we have also provided easy ways to customize it. Furthermore, there are so many things that you can do with the iOS 18 iPhone lock screen notifications. While most of the users loved the feature, some are quite hesitant about its application. What is your take on this? Let us know about it in the comments.

How To Fix Auto Lock Greyed Out on Apple iPhone 13

Auto-lock on iOS devices serves multiple purposes - it conserves battery life, secures your data, and more. But have you encountered the Auto-Lock greyed-out dilemma, fixed at 30 seconds? When this setting becomes inaccessible, it limits your control over screen timeout.

Read on if you’ve encountered a similar problem on your iOS device. In this guide, we’ll explore the possible reasons and offer steps to fix Auto-Lock greyed out on iPhone and iPad devices. If force restarts or settings resets haven’t worked for you, we’ve got alternative solutions. Let’s get started.

Part 1: Why Is Auto-Lock Greyed Out on iOS Device?

There are a few reasons why the Auto-Lock might be greyed out on your Apple iPhone 13 or iPad device, preventing you from adjusting the duration. Here are the most common culprits:

Low Power Mode

When you activate Low Power Mode on your iOS device, you might notice the screen automatically locking after 30 seconds of inactivity. This quick sleep setting, implemented to minimize power usage, explains why the Auto-Lock option appears greyed out and inaccessible.

Screen Time Restrictions

Screen Time restrictions can impact Auto-Lock. For instance, if your downtime schedule blocks all apps, the screen locks itself, even if the Auto-Lock timer hasn’t run out.

MDM Profile Restrictions

If the Auto-Lock is greyed out on your iPad or iPhone and you use it for work or school, a Mobile Device Management (MDM) profile might be the reason. This profile restricts settings, including Auto-Lock. To fix this, contact your IT administrator and ask if they can adjust the MDM profile settings.

Alright, you know the possible reasons why the Auto-Lock option is not working on your iOS device. Still, you might be wondering how to fix the Auto-Lock greyed-out issue. Below are several ways to get your iPad or iPhone Auto-Lock working normally again.

Fix No.1: Disable Low Power Mode

Your iPhone Auto-Lock greyed out because Low Power Mode limits background activities, including the Auto-Lock option. In this mode, you cannot change the Auto-Lock settings. Turn off Low Power Mode to fix this issue and choose your preferred timeout. Here’s how:

Step 1: Go to your Apple iPhone 13 or iPad’s Settings app.
Step 2: Scroll down and tap Battery. It will show you your device’s battery usage and available settings.
Step 3: Turn off the Low Power Mode. Now, the greyed-out Auto-Lock option in Settings should be available again.

Low Battery Mode can stretch your battery life further. But if you need your screen to stay on longer, like while reading an article or watching a video, you can turn it off. It lets you adjust the screen timeout in Settings so it stays awake for as long as you like.

Fix No.2: Check Screen Time Restrictions

You’ve ruled out the Low Power Mode, but the Auto-Lock greyed out on iPad or iPhone remains. If Low Power Mode isn’t causing the problem, your screen time settings might be the issue. Some app restrictions can limit your screen use to specific times, causing it to lock automatically. Resolve this by removing limits, such as downtime and app restrictions, or turning it off.

Step 1: Open the Settings app on your iOS device.
Step 2: Go to Screen Time, then scroll down.
Step 3: Tap Turn Off Screen Time.

Fix No.3: Remove MDM Configuration Profile

A configuration profile is a file that contains settings and restrictions that can be applied to an iOS device. Organizations, schools, or IT administrators often use it to manage devices remotely and enforce specific configurations. Once installed, the settings within a profile override the Apple iPhone 13 device’s default settings. It can include restrictions related to security, network access, app usage, and more.

Since an MDM configuration profile causes limitations, like the greyed-out Auto-Lock on iPad, removing it can be the solution. Doing so frees your iOS device from external settings imposed by the profile. Then, it could allow you to adjust the Auto-Lock time setting as you normally would.

Step 1: See the configuration profiles you installed on your iOS device.
Go to Settings> General > VPN & Device Management on your Apple iPhone 13.
Go to Settings> General > Profiles & Device Management on your iPad.
Step 2: Select the configuration profile you need to delete.
Step 3: Tap Remove Profile, enter your device passcode, then tap Remove.

Fix No.4: Remove Network Settings Installed by MDM

Businesses often use Mobile Device Management (MDM) to remotely manage their employees’ iPhones and iPads. MDM lets IT admins push software updates, restrict apps, and remotely wipe a lost device. This keeps corporate data safe and devices under control, whether the company or the employee owns them.

If you’re having trouble with a greyed-out Auto-Lock timeout setting, disassociating your device from MDM might be an option. But remember, this is a big step. Make sure you follow your company’s authorized procedures to avoid unintended consequences.

If your IT team gives the green light, you might also be able to remove the network settings installed by MDM. Just proceed with caution, as messing with these settings could lead to instability or data loss. Here’s how:

Step 1: Open the Settings app on your iOS device.
Step 2: Navigate to General > Profile or VPN & Device Management (or a similar section).
Step 3: Select the management and tap Remove Management.

If the option is unavailable, only the person who used Apple Configurator 2 or handles your company’s mobile device management platform can remove it.

Fix No.5: Use Dr.Fone To Bypass MDM Lock Without Data Loss

Unfortunately, manually removing profiles can be tricky, especially if they’re associated with MDM, Apple School Manager, or supervised configurations. These often require the removal of passwords, admin privileges, or complete data wipes. But there’s good news. Wondershare Dr.Fone - Screen Unlock (iOS) provides a simpler and safer solution.

Here’s why you should try it:

**Speedy and Efficient:**No more endless troubleshooting. Dr.Fone bypasses the MDM lock in minutes, saving you precious time.
**Data Stays Safe:**Unlike factory resets, Dr.Fone keeps all your precious photos, messages, and apps right where they belong.
**No Jailbreaking:**Say goodbye to complex hacks and warranty voiding. Dr.Fone works without jailbreaking your Apple iPhone 13, keeping it healthy and secure.
**Universal Compatibility:**Whether you own the latest iPhone with iOS 17 or an older version, Dr.Fone has your back. It supports all iOS devices and versions starting from iOS 7.0.

Have you ever bought a used iPad or Apple iPhone 13 to find the Auto-Lock option greyed out and isn’t working? Mobile Device Management (MDM) profiles, often deployed by companies or schools, can restrict functionality. If you lack the credentials to bypass or remove it, Dr.Fone can help remove all MDM restrictions on your iOS device. Here’s how:

Step 1: Download and open Dr.Fone on your computer. Next, connect your Apple iPhone 13 or iPad to the computer using a USB cable and navigate to Toolbox > Screen Unlock > iOS.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Step 2: Within the Screen Unlock tool window, select Unlock MDM iPhone.

Step 3: Select Bypass MDM, then click Get Start to proceed.

Step 4: Please review the message carefully before initiating the MDM bypass process. Once you’ve read it, click Start to Bypass to proceed.

Step 5: If prompted, go to your device’s Settings > Apple ID > iCloud and turn off the Find My feature. Next, click OK to initiate the MDM bypass.

Step 6: The software will display the progress of the bypass. Wait for it to complete.

Step 7: You’ll see a confirmation message once the bypass is successful. Click Done to exit. Your device should now be free from MDM restrictions.

Fix No.6: Check and Adjust Auto-Lock Settings

Once you’ve tried all the fixes above, you might need to set up the Auto-Lock timeout again.

Setup Auto-Lock on iPad

Here are the steps on how to change Auto-Lock on iPad devices:

Step 1: Within the Settings app, scroll down the list on the left-hand side and tap Display & Brightness.
Step 2: On the right-hand side of the Display & Brightness screen, tap the Auto-Lock option.

Step 3: A list of time options will appear, ranging from 2 minutes to 15 minutes, as well as Never. Select the time you want your iPad to wait before automatically locking the screen after inactivity. If you want the screen to stay on indefinitely, choose Never.

Step 4: Once you’ve selected your preferred auto-lock duration, you can exit the Settings app. The change will be applied automatically.

Setup Auto-Lock on iPhone

Here’s how to change Auto-Lock on iPhone devices:

Step 1: Open the Settings app.
Step 2: Tap on Display & Brightness, scroll down, and tap Auto-Lock.
Step 3: Choose the desired time interval for your Apple iPhone 13 to automatically lock. The available options typically range from 30 seconds to 5 minutes. You may also have the option to select Never if you prefer to have the screen stay on indefinitely until you manually lock it.

Conclusion

There you have it. This guide has equipped you with the knowledge and solutions to fix the Auto-Lock greyed out on your Apple iPhone 13 or iPad devices. From identifying the reasons like Low Power Mode and MDM configurations to implementing actionable fixes, you can now change your screen timeout. So, turn off those restrictions, remove MDM profiles, and head back to Settings.

For an easy solution, use Dr.Fone Screen Unlock to bypass MDM restrictions, giving you control over your device. Whether it’s a work phone or a personal device under MDM, Dr.Fone can offer an efficient solution. With a few clicks, you’ll have the Auto-Lock back on track, ensuring your iOS device works again just how you want it.