How Many Attempts To Unlock Apple iPhone SE (2020)

Unlocking your Apple iPhone SE (2020) involves a delicate balance to avoid pitfalls. Knowing how many attempts to unlock an iPhone is vital due to Apple’s security measures. Exceeding the limit triggers consequences, such as temporary disablement or even data erasure.

These restrictions highlight the need to learn how many attempts for iPhone passcodes are allowed before facing potential data loss. When dealing with failed passcode attempts, exploring methods for successful access is essential. Let’s delve into the intricacies of iPhone passcode security and unveil strategies for a seamless unlocking process. Read on to learn more.

Part 1. How Many Times Until the Apple iPhone SE (2020) Is Permanently Disabled?

Unlocking an iPhone involves a series of attempts, each with distinct consequences. Here’s a breakdown of how many failed passcode attempts on an iPhone you can do before it locks you out:

First 5 Attempts

No significant consequences.
Users have the flexibility to enter their passcode without any penalties.

6th Attempt

iPhone is disabled for 1 minute.
An iPhone is Disabled message appears on the screen.

7th Attempt

Disabled for 5 minutes.
The same on-screen message persists, but the Apple iPhone SE (2020) enforces a longer wait time.

8th Attempt

Disabled for 15 minutes.
Users must wait before attempting again. The escalating time delay discourages brute-force attacks.

9th Attempt

Disabled for 60 minutes.
A considerable waiting period is imposed. It increases the frustration for unauthorized users attempting to gain access.

10th Attempt

iPhone is disabled.

Two things can happen on the tenth failed attempt to unlock your Apple iPhone SE (2020). If you have Erase Data enabled, your phone’s data gets wiped. If it’s disabled, the Apple iPhone SE (2020) is permanently locked, requiring a connection to iTunes for restoration. It’s crucial to back up your data on iCloud or locally to avoid permanent loss.

Part 2. What Are the Consequences After Consecutive Failed Attempts?

When you exceed ten unsuccessful passcode entries, the Apple iPhone SE (2020) device takes stringent actions to protect sensitive data. It can initiate a data wipe or lock the iPhone, needing a connection to iTunes for restoration. After a series of failed attempts, the Apple iPhone SE (2020) can activate a security measure often referred to as a “self-destruct” mode.

To turn this mode on or off, follow these steps:

How To Enable Erase Data Mode

Safeguard your personal information with these simple steps to remotely wipe your device in case of loss or theft.

Step 1: Go to Settings > Face ID & Passcode or Touch ID & Passcode, depending on your device. Enter your current passcode.

Step 2: Scroll down and find the Erase Data option. Toggle the button to activate the feature.

How To Disable Erase Data Mode

Here are the steps to disable Erase Data Mode on your Apple iPhone SE (2020), ensuring controlled access to your device.

Step 1: Follow the same steps to access the Erase Data toggle. Next, disable the toggle to turn off this feature.
Step 2: Confirm your choice, ensuring the “self-destruct” mode is deactivated to prevent accidental data loss.

Part 3. Top 5 Methods To Unlock an iPhone After Too Many Attempts

When wondering how many tries to unlock an iPhone, consider the following methods to restore functionality. The section below explores the most effective ways to regain access to your device. Let’s start with the use of a dedicated screen unlock tool.

Method 1: Using a Dedicated Screen Unlock Tool

When facing a disabled iPhone, Wondershare Dr.Fone - Screen Unlock (iOS) stands out as a reliable solution. It’s a comprehensive platform that unlocks iOS devices without a passcode. Here are some of the tool’s key features to help you get started:

Removes all types of lock screens. Fone Screen Unlock tackles various lock screen types, like pattern lock, etc. It offers a comprehensive solution for different scenarios.
Unlock Apple ID without a password. The tool provides a secure method to unlock Apple ID without needing a password.
No data loss. Users can regain access without losing data, a crucial aspect of dealing with a disabled iPhone.
High success rate.Fone Screen Unlock boasts a high success rate, instilling confidence in users seeking a swift and effective solution.

How To Unlock iPhone With Dr.Fone

After many failed passcode attempts on your Apple iPhone SE (2020),Dr.Fone can help you access it again in no time. Follow the steps:

Step 1: Download and install Dr.Fone on your computer. Next, click Toolbox > Screen Unlock > iOS to start. In the next window, choose Unlock iOS Screen.

Step 2: Follow the on-screen instructions. Dr.Fone will automatically detect your Apple iPhone SE (2020) model. If necessary, choose the System Version according to your preference. Next, click Start to start the iOS firmware download.

Step 3: Wait for the iOS firmware to download successfully. Click on Unlock Now to initiate the unlocking process. Follow the on-screen instructions again and wait for Dr.Fone to unlock your device. If unsuccessful, click on the Try again option.

Method 2: Using iTunes To Unlock a Locked or Disabled iPhone

An alternative method to unlock your Apple iPhone SE (2020) when locked or disabled involves using iTunes. Note that if your iTunes is not synchronized with the iPhone, you risk losing your existing data. Here’s how:

Step 1: Launch iTunes on your computer. Connect your locked iPhone using a cable and let iTunes identify the Apple iPhone SE (2020) device. Next, navigate to the Summary section and select the Restore iPhone option.

Step 2: Allow iTunes to identify your device. Start the restoration of previous data by selecting Restore Backup. Your Apple iPhone SE (2020) will be unlocked with all the associated data if you have backed up your information on iTunes. Otherwise, you will need to set it up as a new iPhone.

Method 3: Using Recovery Mode To Unlock a Locked or Disabled iPhone

Activating Recovery mode is another useful method for accessing a locked phone. The approach erases all data on the phone, restoring it to factory settings. Any data not backed up will be lost using this method. Follow the steps:

Step 1: Download and Launch iTunes on your computer. Connect your Apple iPhone SE (2020) with a USB cable.
Step 2: For iPhone 8 models or newer, press and release the volume up button, followed by the volume down button. Next, press and hold the power button. If executed, the iTunes connect screen will appear. For earlier iPhone models, you can refer to here.

Step 3: iTunes will prompt you to either restore or update your Apple iPhone SE (2020). Choose the Restore iPhone option to reset your device to its factory settings. If the restoration process extends beyond 15 minutes and your Apple iPhone SE (2020) exits recovery mode, you’ll need to repeat the steps.

Method 4: Using iCloud To Unlock a Lock or Disabled iPhone

After **many failed passcode attempts on your Apple iPhone SE (2020)**，it got disabled, but iCloud offers a convenient solution. Your phone must have the Find My iPhone option enabled for the method to work. You should be aware of the Apple ID password associated with your iCloud account. Once these prerequisites are fulfilled, access the iCloud account from another device. Here’s how.

Step 1: Go to iCloud.com using another device, such as a computer, and log in with your Apple ID and password.

Step 2: Select All Devices, and pick the locked iPhone from the dropdown menu. Once you’ve chosen the Apple iPhone SE (2020) device, click the Erase iPhone icon in the lower-right corner. Although the action deletes the data on the phone, you can retrieve it from your iCloud backup once the Apple iPhone SE (2020) device is operational again.

Method 5: Contact Apple Support or Visit an Apple Store

If all methods fail or you don’t have access to Dr.Fone, consider contacting Apple Support. You can also try visiting an Apple Store. Apple experts will guide you through the appropriate steps based on your unique situation.

Conclusion

If you are wondering how many passcode attempts on iPhone will lock your device and not sure how to fix this issue, here is the way to go. Methods like iTunes, Recovery Mode, iCloud, or seeking Apple Support all offer potential solutions.

Consider using Dr.Fone Screen Unlock (iOS) for a secure and data-preserving unlock. It safeguards your data even if you forget your passcode. Remember that surpassing the allowed attempts could result in data loss or permanent device disablement. Safeguard your data wisely by exploring these methods.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

How to Unlock Apple iPhone SE (2020) with a Mask On

Are you tired of wearing a mask in this pandemic? Apple introduced a new feature through which people can unlock iPhone face ID while wearing a mask. Before this, people either had to use other types of passwords or put off the mask to use Face ID. However, this feature is only available on iOS 15.4, depicting that iPhones containing earlier iOS versions won’t be able to enjoy this feature.

Only iPhone 12 and the latest models can use Face ID with a mask on, which reflects that models like iPhone 11, iPhone X, and the older models cannot utilize this function. Moreover, an additional way to unlock iPhone is to use Apple Watch to unlock iPhone 11, X, or earlier models.

Once you meet these requirements, you can easily unlock your Apple iPhone SE (2020) while wearing a mask and get further details by reading this article.

Part 1: How to Unlock iPhone Face ID with a Mask on

Are you excited to unlock your Apple iPhone SE (2020) while wearing a face mask? This section will give you detailed steps to unlock your Apple iPhone SE (2020) with a mask on, but before proceeding, make sure that you have updated your phone’s model to iPhone 12 or iPhone 13. This iOS 15.4 version feature is only available on:

iPhone 12
iPhone 12 Mini
iPhone 12 Pro
iPhone 12 Pro Max
iPhone 13
iPhone 13 Pro Max
iPhone 13 Pro
iPhone 13 Mini
iPhone 14
iPhone 14 Pro
iPhone 14 Pro Max
iPhone 15
iPhone 15 Pro
iPhone 15 Pro Max

Once you have updated to iPhone 12 or iPhone 13 model, you will automatically receive the prompt to set your Face ID while wearing a mask. If you have missed the chance to scan your face during the setup of iOS 15.4, follow the below guidelines to activate this fantastic feature unlock iPhone with a mask:

Step 1: Navigate to the app “Settings” from the home screen of your Apple iPhone SE (2020). From the displayed menu, select “Face ID & Passcode.” Enter your passcode to give verification.

Step 2: Tap on the toggle switch of “Use Face ID with a Mask.” Afterward, select “Use Face ID with a Mask” to begin with settings.

Step 3: Now, it’s time to scan your face with your Apple iPhone SE (2020) to initiate the setup. Again, you don’t have to wear a mask at this stage, as the Apple iPhone SE (2020) device’s main focus while scanning would be the eyes. Also, if you wear glasses, you can proceed without taking them off.

Step 4: After scanning your face twice, select “Add Glasses” by tapping on it. You can use your Face ID while wearing your regular glasses. Make sure that you scan your face with every pair of glasses daily.

After carefully following the steps mentioned above, you are ready to unlock your Face ID with a mask. Remember that Face ID will scan and focus mainly on your eyes and forehead. However, it cannot work in the scenarios if you have completely concealed your look by wearing hats or accessories that can hide your face.

Part 2: How to Unlock iPhone Face ID Using Apple Watch

Before unlocking iPhone through the Apple Watch, some requirements are necessary for security reasons. Read the following requirements to proceed further:

First, you would need an Apple Watch that must be functioning on WatchOS 7.4 or later.
The passcode on your Apple iPhone SE (2020) must be enabled from the settings. If you have not enabled the passcode on your Apple iPhone SE (2020), you can do it by navigating to the “Settings” and tapping on “Passcode.” From there, enable the passcode by turning it on.
You should be wearing the Apple Watch on your wrist, and it must be unlocked.
Your Apple iPhone SE (2020) should be upgraded to iOS 14.5 or above.
The wrist detection on your phone should be activated.

To enable the feature of unlocking the Apple iPhone SE (2020) with an Apple Watch, the steps are:

Step 1: Head to the “ Settings “ app and choose “Face ID & Passcode.” Give your passcode for authenticity and proceed further.

Step 2: Now, on the displayed menu, scroll down to the bottom, where you will see the toggle of “Unlock with Apple Watch.” Tap on that toggle to enable this feature.

After enabling this feature, you can unlock your Apple iPhone SE (2020) with a mask on through your Apple Watch. You need to grab your phone and hold it the same way you would in a normal Face ID scan. The phone will be unlocked, and you will feel a slight vibration on the wrist. Also, a notification will pop up on your watch, indicating that your Apple iPhone SE (2020) has been unlocked.

Bonus Tips: Unlock iPhone Without Any Experience

Are you stuck with your locked iPhone? Don’t worry, as Dr.Fone - Screen Unlock can unlock any screen passcode, Face ID, Touch ID, and PINs. You don’t need any technical experience to use this tool, as the user interface is pretty simple and understandable. Moreover, it works perfectly well on all iOS devices at the best possible speed.

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone/iPad Lock Screen Without Hassle.

Intuitive instructions to unlock iPhone without the passcode.
Removes the iPhone’s lock screen whenever it is disabled.
Works for all models of iPhone, iPad and iPod touch.
Fully compatible with the latest iOS 11,12,13.

3981454 people have downloaded it

You can also unlock Apple ID and iCloud passwords without losing the data. Also, while unlocking iPhone Screen Time Passcode through this platform, all of your data and information will be kept intact, and you can function your phone normally again.

Conclusion

We all can relate that unlocking an iPhone on Face ID while wearing a face mask in a pandemic era is annoying. That’s why Apple introduced a new feature of unlocking the Apple iPhone SE (2020) Face ID with a mask on to help individuals who rely entirely on Face ID. Find out about enabling this feature to easily unlock your Apple iPhone SE (2020) Face ID while wearing a mask.

How to Unlock Apple iPhone SE (2020) With an Apple Watch & What to Do if It Doesn’t Work

There are plenty of reasons why Apple devices are in such high demand. The quality of the products is unquestionable – few can argue the superior quality of the Apple iPhone SE (2020)’s camera, for instance. Almost all devices are long-lasting. They have a great resale value. They offer cutting-edge features.

However, perhaps the greatest advantage of Apple products is just how well they integrate with one another and work together.

With a quick little tap, you can have your Apple iPhone SE (2020)’s camera working as your Mac’s webcam. You can use your iPad as a second Mac display. Take calls using any device.

Moreover, you might be able to use the Apple Watch to unlock your Apple iPhone SE (2020).

Now, you cannot just unlock any Apple iPhone SE (2020) with your Watch. The devices must be paired, and you’ll need to follow a few steps to enable this option. Here’s how to unlock your phone using your Apple Watch like a pro.

Part 1. Can I Use an Apple Watch To Unlock My Apple iPhone SE (2020)?

The Apple iPhone SE (2020) face ID is one of the simplest, most practical ways to unlock your phone. While you’ll need a passcode just as another security layer, you won’t have to worry about someone else breaking in if they know it, going through your messages, or collecting your private information.

With face ID, only you can unlock your phone, sign in to your favorite apps, and even authenticate purchases.

The problem is that neither face ID nor traditional passcodes aren’t always the most convenient option. If you wear sunglasses, safety goggles, a face mask, or other face coverings and can’t take them off for some reason, face ID won’t work. If you have gloves on and can’t type in your passcode, your passcodes won’t work.

What could work is your Apple Watch.

Depending on the Apple Watch version you own and your Apple iPhone SE (2020) model, you could use your watch to unlock your phone in any circumstances. It’s easy, secure, and convenient, above all else.

Part 2. Requirements for Unlocking Apple iPhone SE (2020) With Apple Watch

Unfortunately, not every Apple iPhone SE (2020) can be unlocked with your Apple Watch, and not every Apple Watch can unlock your Apple iPhone SE (2020). Both devices must meet some requirements before you can adjust your settings to enable this option.

To be able to use your Apple Watch to unlock your phone with the utmost ease, you’ll need:

An Apple iPhone SE (2020) with Face ID – Apple iPhone SE (2020) X and newer models;
iOS 14.5 and newer versions;
An Apple Watch series 3 and newer models;
watchOS 7.4 and newer versions.

Additional requirements you’ll need to meet include:

Your Apple iPhone SE (2020) and Apple Watch need to be paired;
Both devices need to have WiFi and Bluetooth turned on (but a connection to a WiFi network isn’t necessary);
You need to have a passcode on your Apple Watch;
Wrist detection on your watch needs to be turned on;
The watch needs to be on your wrist and unlocked.

You’ll also need to wear items such as sunglasses, face coverings, ski masks, or others that prevent you from using your Apple iPhone SE (2020) Face ID.

Part 3. How To Unlock Apple iPhone SE (2020) With an Apple Watch

If you meet all the aforementioned criteria, setting up the feature to unlock your Apple iPhone SE (2020) using an Apple Watch is easy. You’ll just have to follow a few steps:

Step 1: Go to Settings > Face ID & Passcodeon your Apple iPhone SE (2020);

Step 2: Type in your passcode;
Step 3: Find and enable Unlock with Apple Watch.

Remember that your Apple Watch’s wrist detection must be turned on for this option to work. When you tap to enable Unlock with Apple Watch, if your wrist detection isn’t turned on, you’ll get a prompt on your phone asking you to turn it on.

You can turn on wrist detection on your watch by following these steps:

Step 4: Go to Settingson your Apple Watch;
Step 5: Tap on the Passcode;
Step 6: Toggle Wrist Detection

Now that you’ve enabled the option to unlock your Apple iPhone SE (2020) using your Apple Watch, it’s time to simply start using the feature. To unlock your phone, you’ll need to:

Have your Apple Watch on your wrist, unlocked;
Tap on your Apple iPhone SE (2020) or raise it to your face to activate it;
Glance at your phone while wearing a face mask, sunglasses, or another item that’s preventing you from using Face ID;
Swipe up on your phone’s screen.

Your Apple Watch will send an alert when you’ve used it to unlock your Apple iPhone SE (2020). If you accidentally unlock your phone, simply tap on the Lock Apple iPhone SE (2020) on the screen of your watch to lock it.

However, remember that the next time you want to use your Apple Watch to unlock your Apple iPhone SE (2020), you’ll first need to type in your passcode.

Part 4. What To Do if You Can’t Unlock Your Apple iPhone SE (2020) With a Watch

Generally speaking, unlocking your Apple iPhone SE (2020) with an Apple Watch should be a simple, seamless task. Unfortunately, though, that’s not always the case. A glitch or a bug could be preventing you from enjoying this feature, so take a look at a few things you could try to fix it.

1. Check All Settings & Reconfigure

As mentioned earlier, there are a few requirements that your devices need to meet to unlock your Apple iPhone SE (2020) with your Apple Watch.

If you’re using the correct versions of Apple iPhone SE (2020) (iPhone X, iOS 14.5 and newer) and Apple Watch (series 3, watchOS 7.4 and newer), try to reconfigure your settings.

Make sure that you have:

A passcode on your watch;
Wrist detection turned on;
Feature Unlock with Apple Watchturned on on your Apple iPhone SE (2020).

If all the settings are correct, try one of the following options.

2. Restart Your WiFi/Bluetooth Connection

Your Apple iPhone SE (2020) and your Apple Watch need to have both WiFi and Bluetooth turned on. If they’re turned on on both devices, try turning them off and back on again to restart the connection.

Remember, you only need WiFi and Bluetooth on but don’t need to be connected to a WiFi network.

If the problem persists, you could also restart your devices and try again.

3. Reset Your Face ID

In some instances, it’s the Face ID feature that’s causing trouble, so you might want to try and reset it. It’s much easier than it may sound, you just need to follow the next few steps:

Step 1: Go to your Apple iPhone SE (2020)’s Settings;
Step 2: Select Face ID & Passcode;
Step 3: Tap Reset Face ID.

When you tap on this, you’ll need to go through the process of setting your Face ID as usual. You’ll need to type in your passcode, hold your Apple iPhone SE (2020) in front of you (in portrait orientation), tap to get started, and put your face in the provided frame.

Move your face to complete the circle, then tap on Continue. Repeat the face scan process the second time and select Done.

4. Do a System Repair on Your Apple iPhone SE (2020)

If your Apple Watch unlock is still misbehaving, you might need to do a full system repair. As a general rule of thumb, it’s best to use verified apps like Dr.Fone to prevent the problem from getting worse.

Dr.Fone Apple iPhone SE (2020) system repair is designed to be fast, efficient, and safe. It can repair virtually any system glitch in less than five minutes, ensuring your phone operates seamlessly.

To perform a standard system repair with Dr.Fone, follow the next few steps:

Step 1: Download and launch Dr.Fone on your computer;
Step 2: From the Toolboxon your left-hand side, select System Repair;

Step 3: Connect your Apple iPhone SE (2020) to your PC using a cable connection;
Step 4: Select your device type in the new window that opens;
Step 5: Select iOS repair;

Step 6: Select Standard Repair Mode;
Step 7: Follow the on-screen instructions and select Enter Recovery Mode;
(Alternatively, select Guideif your phone is unresponsive);
Step 8: Select the iOS firmware you want to download and install on your device;
Step 9: Wait for the download to finish, then select Repair Now;
Step 10: Wait until the process is complete, then select Done.

If it was a system mistake preventing you from unlocking your Apple iPhone SE (2020) with your Apple Watch, the option should be functioning well after the Dr.Fone iOS repair.

5. Reset Network Settings

If the problem wasn’t due to a system glitch, you should try resetting your Apple iPhone SE (2020)’s network settings. The process is simple, just:

Step 1: Go to Settings > General > Reset > Reset Network;
Step 2: Type in your passcode.

Resetting your network settings will clear out data from your internet, local network, and devices, including WiFi passwords, some Bluetooth connections, and more. However, your paired devices, such as the Apple Watch, shouldn’t be removed.

6. Reset Your Watch and Pair It Again

Finally, if you’re still experiencing issues, you might need to reset your Apple Watch and pair it with your Apple iPhone SE (2020) again.

It’s all quite simple:

Step 1: Press and hold the power button;
Step 2: Drag the slider under Power offto the right;
Step 3: Press and hold the power button to turn the Apple iPhone SE (2020) device back on.

To perform a hard reset, simultaneously press and hold the power button and digital crown.

Conclusion

Using your Apple Watch to unlock your Apple iPhone SE (2020) is convenient when you cannot use the Face ID feature. It allows you to seamlessly unlock your phone when wearing sunglasses, goggles, face masks, or other face coverings that prevent the Face ID from working.

Enabling this option is a straightforward process, and if there’s ever a glitch, there are several options you could try to repair it.

iOS Unlock

How Many Attempts To Unlock Apple iPhone SE (2020)