3 Ways to Erase Apple iPhone XS When It’s Locked Within Seconds

Over the last few years, Apple has made remarkable progress with its flagship iPhone series. There are plenty of ways for users to back up, erase, and restore their data. It doesn’t matter if you are moving from one device to another or would like to reset your phone. You should know how to erase iPhone when locked. Too many times, after getting locked out of their device, users find it hard to wipe locked iPhone. If you are also going through the same dilemma, then don’t worry. Read on and learn how to wipe a locked iPhone in this extensive guide.

Part 1: Erase locked iPhone with Dr.Fone - Screen Unlock (iOS)

One of the best ways to wipe locked iPhone is by using Dr.Fone - Screen Unlock (iOS) tool. It is an extremely secure and reliable application. It is already compatible with every leading version of iOS and runs on almost all major iOS devices. Available for both Windows and Mac, the tool can be used to remove activation lock and Apple ID. The tool also provides an easy-to-use interface that can help you reset the activation lock on your device.

Dr.Fone - Screen Unlock (iOS)

Erase the data of an iPhone even if it is locked

• Erase iPhone data together with the lock screen.
• Remove the 4-digit/6-digit passcode, Touch ID, and Face ID , and activation lock.
• A few clicks and the iOS lock screen are gone.
• Fully compatible with all iDevice models and iOS versions.

4,395,216 people have downloaded it

To learn how to erase iPhone when locked, follow these steps:

Step 1. Download and install Dr.Fone.

Start by downloading Dr.Fone - Screen Unlock (iOS) from its official website. Install it on your Windows or Mac and connect your Apple iPhone XS to the system whenever you wish to resolve an issue with it. After launching the application, click on the “Screen Unlock” option from the welcome screen.

Step 2. Click Start button.

Wait for a while as the application will automatically recognize your phone. Click on the “Start” button to commence the process.

Step 3. Put the phone into DFU mode.

Follow the on-screen instructions to put your phone into the DFU (Device Firmware Update) mode. It can be done by pressing the Home and Power button simultaneously for 10 seconds. Afterward, it would help if you released the Power button while pressing the Home button for another 5 seconds.

Step 4. Download firmware package.

After putting your device into the DFU mode, the application will automatically move to the next window. Here, you would be required to provide essential information related to your phone like device model, firmware update, and more. After filling in the correct information, click on the “Download” button.

Sit back and relax as the application will download the essential firmware update for your phone.

Step 5. Start to unlock.

Once it is done, the application will automatically start resolving the issue on your phone. Make sure that you don’t disconnect your phone while Dr.Fone - Screen Unlock (iOS) will resolve the issue on your device.

Step 7. Unlock completed.

After completing the operation successfully, the interface will provide the following message.

You can check if you can unlock your phone or not. If you still have an issue, then click on the “Try Again” button. Else, you can safely remove your phone and use it without any constraint. By following this method, you would learn how to wipe a locked iPhone with Dr.Fone - Screen Unlock (iOS).

One of the best things about this technique is that you would wipe locked iPhone without causing any damage. Since it is a secure and reliable method with a high success rate, it is sure to provide a hassle-free experience.

Part 2: Erase locked iPhone by restoring it with iTunes

If you are looking for an alternative way to learn how to erase iPhone when locked, you can also take the assistance of iTunes. It provides a free and simple method to restore your device. Since it would wipe your data, you might end up losing your essential files in the process. We recommend following this technique only when you have taken a backup of your data via iTunes beforehand. To learn how to wipe a locked iPhone with iTunes, follow these steps:

1. Firstly, put your Apple iPhone XS into recovery mode. To do this, launch an updated version of iTunes on your system and connect it to a lightning cable. Now, long-press the Home button on your device and connect it to the other end of the lightning cable. Release the Home button once the iTunes logo would appear.

2. As soon as your phone would be connected, iTunes will recognize an issue with it. From here, you can choose to restore it.

3. If you don’t get the above pop-up on your screen, launch iTunes and visit its “Summary” section. From here, choose “Restore backup” under the Backup section.

4. agree to the pop-up message by clicking on the “Restore” button.

Part 3: Erase locked iPhone by Find My iPhone

If you haven’t already taken a backup of your phone, then you might find it hard to recover it with iTunes. Another popular way to wipe locked iPhone is by using the Find My iPhone tool. This is mostly implemented in case of a stolen or lost device. One of the best features of Find My iPhone is that it can be used to reset your device remotely. With this, you can protect your personal data without much trouble. Implement these steps to learn how to erase iPhone when locked using Find My iPhone.

1. To start with, log in to your iCloud account and visit the “Find My iPhone” section.

2. Under the “All Devices” section, you can choose the Apple iPhone XS you wish to reset.

3. After selecting your device, you will be presented with various options. Select the “Erase iPhone” feature to reset your device.

Confirm your choice and wipe locked iPhone remotely using the Find My iPhone feature on iCloud.

After following this informative guide, you would learn how to wipe a locked iPhone without any trouble. Go ahead and pick your preferred option to wipe locked iPhone. We recommend using Dr.Fone - Screen Unlock (iOS) to resolve this issue securely. Though, if you wish to do it remotely, then you can also give Find My iPhone a try as well. If you are familiar with any other reliable method, please let us know how to erase iPhone when locked in the comments below.

4 Ways to Unlock Apple iPhone XS to Use USB Accessories Without Passcode

How do I unlock my Apple iPhone XS? I know you’re supposed to connect it to the computer and put it in recovery mode but when I do, it says “unlock Apple iPhone XS to use accessories.”

You may have had the experience of connecting your Apple iPhone XS to a computer with USB accessories. Usually, “Unlock Apple iPhone XS to use accessories“ will appear on the screen. In most cases, enter the passcode to unlock the phone, and you can then proceed with data transfer and management. What to do if you forget your screen lock passcode? Here come the most effective methods for you!

Part 1: Why You Need to “Unlock Apple iPhone XS to Use Accessories”?

The command comes from Apple’s significant privacy safeguard “USB Restricted Mode”. It means after an hour of your iOS device is unlocked, the system cuts off the lightning port and limits it to charging only. Simply put, when your Apple iPhone XS is locked for more than an hour, it needs to be unlocked to allow the connection of USB accessories. Sometimes, when you unlock your Apple iPhone XS screen to use USB accessories, it can’t charge anymore.

In 2017, a password cracking tool called GrayKey was launched, which can bypass any iPhone screen lock passcode. The FBI, the police, and some government agencies have all become GrayKey customers. To combat hackers including GrayKey and protect iOS users’ data security, the USB Restricted Mode feature arrived with iOS 11.4.1 in July 2018 and be improved in iOS12.

Part 2: How to Disable USB Restricted Mode?

If you find this warning annoying or your Apple iPhone XS not charging when using USB accessories, disabling USB Restricted Mode is an optional solution. However, you have to remember the unlock passcode. All the steps will be presented to you next.

• Step 1: Open Settings on your Apple iPhone XS.
• Step 2: Click on Face ID & Passcode (or Touch ID & Passcode), and then input your screen passcode.
• Step 3: Scroll to the bottom of the page and find “USB accessories“ in the “Allow access when locked“ column.
• Step 4: Click the toggle button on the right to disable this feature.

After completing all the steps, your Apple iPhone XS can connect USB accessories anytime, anywhere. However, it is very common to forget to unlock the passcode. Next, we will recommend four solutions to help you use USB accessories without a passcode.

Part 3: How to Unlock Apple iPhone XS to Use USB Accessories without Passcode via Dr.Fone?

Now, here comes an amazing App with many benefits to solving the problem for you.  This is Dr.Fone-Screen Unlock, which is very convenient and fast to use. You must be curious about it. More of its advantages will be introduced to you.

• The application is available on both Mac and Windows.
• No technical skills are required.
• It fully supports iPhone X, iPhone 11, and the latest iPhone models.
• Dr.Fone - Screen Unlock can easily unlock 4-digit or even 6-digit screen passcode, Face ID, or Touch ID.
• No Apple ID and password are needed.

Step 1: The first step, of course, is to download Dr.Fone to your computer and click on “Screen Unlock”.

safe & secure

Step 2: Connect your Apple iPhone XS to the computer with a lightning cable, and choose “Unlock iOS Screen”.

Step 3: Follow the guides to boot your device in Recovery or DFU mode. The Recovery mode is recommended for iOS lock screen removal by default. If you fail to turn on recovery mode, you can turn to activate DFU mode. DFU means Device Firmware Upgrade, and the operation is more mandatory.

Step 4: Click “Start” to download the firmware. After the download is successful, select “Unlock now” and wait a few minutes, the passcode will be removed from your device.

After that, you could set up your Apple iPhone XS as a new one and unlock your screen to use USB accessories without a passcode.

There is no doubt that you may worry about losing all your data while bypassing the Apple iPhone XS lock screen. But honestly, there is no tool on the market today that can preserve data to unlock an iPhone. Therefore, it is necessary to back up data in your daily life. Dr.Fone-Phone Backup provides you with a full range of data backup solutions, you can click the link below to learn more.

This guide will teach you about how to unlock iphone using 5 feasible ways.

Part 4: How to Unlock Apple iPhone XS to Use USB Accessories without Passcode via iCloud?

With iCloud, you can quickly clean up your Apple iPhone XS, remove screen locks, and help unlock your device. But, you have to know that all your data will be erased. Make sure your Apple iPhone XS has the “Find My iPhone” function enabled, otherwise your device will be offline.

Step 1: Open your computer or another iOS device, and sign in with your Apple account.

Step 2: Click on “All Devices”, choose your Apple iPhone XS, and then “Erase iPhone”.

Now, your Apple iPhone XS will reboot without a passcode. Then, you can unlock Apple iPhone XS to use accessories and bypass the passcode.

Part 5: How to Unlock Apple iPhone XS to Use USB Accessories without Passcode via iTunes?

There is currently no way to unlock an iPhone without erasing all data. Luckily, iTunes can help back up your data before removing it. Please note that this way is only possible if the Apple iPhone XS device has synced data in iTunes before.

• Step 1: Connect Apple iPhone XS to a computer with a USB accessory and turn on iTunes. Then iTunes will make a backup for your phone.
• Step 2: Choose “Restore iPhone”.

Wait for a while and you could unlock the screen to use USB accessories. However, in step one, you may need to enter your passcode to get stuck during the process. Therefore, this method is not the most efficient.

Part 6: How to Unlock Apple iPhone XS to Use USB Accessories without Passcode via Recovery Mode?

If you have forgotten your Apple ID or password and have not synced iCloud and iTunes, you can choose recovery mode. It will remove all your passcode and data as well.

• Step 1: You need to prepare a Mac or PC (Windows 8 or later).
• Step 2: Turn off your Apple iPhone XS.
• Step 3: Put your device in recovery mode. This step might be a little complicated, but don’t worry, we’ll walk you through it step by step.

1. Find the button on your device, it will be useful then.

• iPhone SE (1st generation), iPhone 6s, and earlier: The Home button.
• iPhone 7 and iPhone 7 Plus: The Volume down button.
• iPhone SE (2nd and 3rd generation), iPhone 8, iPhone 8 Plus, iPhone X, and later devices: The side button.

2. Quickly press and hold the button while connecting your phone and computer until the recovery mode appears.

Step 4: Find your tool in iTunes on the computer. Choose Restore and this process will take a few minutes.

Step 5: Unplug your tool and use your Apple iPhone XS without a passcode.

Now, you’ll get an iPhone which is like being factory reset. And you could unlock the screen to use USB accessories when you forget the passcode.

Part 7: Hot FAQ about USB Accessories on iPhone

Q1: What is the feature of USB Accessories on iPhone?

From USB-A to the latest, USB-C. Also, most iPhones use a proprietary Lightning port.

Q2: Why does My iPhone Think My Charger is a USB Accessory?

It is related to the capacity of the charger. If a low-capacity charger is used, your device must regard it as a USB port because the USB port charges at a lower rate than a good wall charger. Another possibility is that the cable being used is flaky.

Q3: What to Do If My iPhone Not Charging after Unlock to Use Accessories?

• Step 1: Disconnect your tool from the accessory.
• Step 2: Unlock your device.
• Step 3: Connect the USB accessory again.

If it doesn’t work, please contact customer service of Apple.

Conclusion

It is very common to use USB accessories to connect iPhone and computer. Sometimes, we may forget the password, or cannot unlock the screen due to system failure. There are many ways to unlock Apple iPhone XS to use the accessories in the article. Finally, we recommend everyone to use Dr.Fone - Screen Unlock, a helpful and convenient tool.

safe & secure

How To Change Your Apple ID on Apple iPhone XS With or Without Password

The Apple ID is a unique identifier used to log in to all Apple services, including iCloud, the App Store, Apple Music, and more. You can track purchases and manage your account settings through your Apple ID. But what if you need a new one for security or moving to a new location?

Whatever the reason, learning how to change your Apple ID on your iPad is straightforward. And this guide will show the steps and provide some tips at the end.

Part 1: Reasons Why You Might Need To Change Your Apple ID

Your iOS devices contain most of your digital data. That includes your contact list, email, financial information, and social media passwords. All this data is valuable - others can use it to do identity theft, fraud, and other crimes.

If you feel the existing Apple ID isn’t secure enough, it’s a good idea to change your Apple ID on your iPad or other devices. Aside from this, there are a few scenarios where you might find yourself needing to change your details:

You No Longer Use the Email Address or Phone Number Associated With Your Apple ID

Life moves fast, and sometimes contact info changes. If the email or phone number linked to your Apple ID becomes outdated, it’s a good idea to update it. That way, you won’t miss out on vital notifications or have trouble recovering your account if needed.

You Want To Simplify Your Online Life

If you have multiple email addresses, you may want to consolidate them into one email address. It can make it easier to manage and remember your online accounts, including your Apple ID.

You Are Relocating to a Different Region or Country

Moving abroad? Your Apple ID may need an update to match your new location. It ensures access to region-specific apps and services. You need to have a few things in place before you can do that: add a payment method for your new location, cancel your subscriptions, and spend your store credit. Aside from that, you will also need to change your Apple ID country or region.

Changing your Apple ID can be smart, ensuring your digital life stays up-to-date, secure, and tailored to your needs. It’s not complicated, and it’s all about making your Apple experience better suited to you. So, go ahead and learn how to change your Apple ID on your iPad in the following sections.

Part 2: How To Change Apple ID on iPad Without Losing Data?

If you receive a notification from Apple about suspicious account activity, it’s time to act. Before you learn how to change the Apple ID on an iPad – for yourself or others, here are some common signs of a compromised Apple ID:

• A login attempt from a device or location that you don’t recognize
• A password change that you didn’t know about
• Unauthorized messages or purchases
• A password that no longer works
• Unfamiliar account details

If you suspect unauthorized access to your Apple ID, below is what you can do.

Steps To Change Your Apple ID to a Different Email Address

If you are worried about losing data such as purchases and contacts, don’t worry. You can update your Apple ID account anytime without disrupting your data. Here’s a step-by-step guide on how to change your Apple ID email address. Just sign out of all Apple services and devices that use your account first.

• Step 1: Visit the Apple ID official website and log in to your account credentials.

• Step 2: Once logged in, select Apple ID in the Sign-In and Security section.

• Step 3: From the Apple ID pop-up window, enter your new Apple ID in the Change your Apple ID text field.

• Step 4: Select Change Apple ID to proceed.
• Step 5: Check your email to get a verification code sent by Apple to ensure that only you can change it to a third-party email address. Enter the code to complete the update.

Step 6: Sign in to Apple services such as iCloud and Messages, using your new Apple ID to continue sharing with others.

Steps To Change Your Apple ID to a Different Mobile Number

Do you want to use Your Apple iPhone XS number as your Apple ID username? It’s possible, but it depends on your location, how you created your account, and what version of iOS you’re using.

If you’re in China mainland or India, and you’re using iOS 11 or later, you can create a new Apple ID with Your Apple iPhone XS number as the username. However, Your Apple iPhone XS number must be (+86) or (+91). So, if you’re thinking of, “How can I change my Apple ID on my iPad if it’s a mobile phone number?” then this guide is for you:

• Step 1: Log out of all Apple services and devices currently signed in with your Apple ID, except the one you’re using to change your Apple ID.
• Step 2: On your iPad, go to Settings > [your account name] > Sign-in & Security.
• Step 3: Tap Edit next to Email & Phone Numbers.

• Step 4: Go to the Delete icon next to your mobile number and follow the directions given.
• Step 5: Enter the code sent to the mobile number you added as your new Apple ID to verify it.
• Step 6: Log into all Apple services using your new Apple ID.

Even if you can’t change your Apple ID on your iPad to a mobile phone number, you can still associate it with a phone number on your account page. It means you can use a different email address or mobile phone number to log in to your Apple ID. See the next sections for more information on the workarounds you can try.

Part 3: What To Do if You Cannot Change Your Apple ID on iPad?

Changing your Apple ID on an iPad is usually easy. However, there can be setbacks during the process. Now, here’s what to do if you find yourself unable to do it and why it might be happening:

Try Again Later

If you encounter errors during the process, give it a little time and try again. Mayne it is because you changed your Apple ID on your iPad to an iCloud email address within 30 days.

Check if Apple ID Is Already in Use

Apple IDs are unique, and you can’t have two identical ones. If you’re trying to change your Apple ID to one that’s already in use, you’ll hit a roadblock. Ensure that the new Apple ID you want isn’t already taken. Remove it from the family member’s account if they are using it.

Your Apple ID Is an Email Address

If your current Apple ID is an email address, you won’t be able to change it to a mobile phone number directly. Instead, you can add an email or phone number to your account for contact purposes.

If you’ve addressed these issues and still can’t change your Apple ID, don’t worry. Apple customer support is available to assist you with account-related challenges. Contact them for guidance and solutions tailored to your situation.

However, if you can’t change your Apple ID on your iPad because you forgot or don’t have access to the password, you can use a third-party tool such as Dr.Fone. This tool is easy to use and can help you unlock your iPad and remove the Apple ID in a few clicks.

Part 4: Using Wondershare Dr.Fone

Dr.Fone Screen Unlock (iOS) tool is your go-to solution for unlocking iOS devices without a passcode. The best part? It is easy to use for users of all technical backgrounds. With Dr.Fone, you can unlock iOS screens protected by 4 to 6-digit passcodes, Face ID, Touch ID, and more.

But it doesn’t stop there; Dr.Fone can also help remove the iCloud activation lock, unlock Apple ID without a password, and much more. This powerful tool is a lifesaver for iOS users, supporting the latest iPadOS 17, iOS 17, and iPhone 14.

Step-by-Step Guide to Removing Apple ID on iPad Using Dr.Fone

Dr.Fone can bypass the Find My/Find My iPhone feature to remove your Apple ID from your iPad, iPhone, or iPod Touch. Follow the steps below to learn how to use this feature on your iOS device.

• Step 1: Get Wondershare Dr.Fone from their website and install it on your computer.

• Step 2: From the app’s Toolbox homepage, click Screen Unlock, and select iOS.

• Step 3: Select Remove AppleID from the available Screen Unlock tools.

• Step 4: Connect your iPad or other iOS device to your computer, then click Unlock Now to continue.

• Step 5: Click Yes to confirm your device has a screen lock. Otherwise, it won’t work.

• Step 6: Enable the Two-Factor Authentication on your iPad so you can unlock your Apple ID. Then, click Yes to proceed.

• Step 7: Follow the on-screen instructions to put your iPad in Recovery Mode.

• Step 8: The next screen will demonstrate the Device Model information. Select an option from the System Version dropdown list and click Start.

• Step 9: The iOS firmware will start downloading, and you can see the progress on the next screen. If you’re experiencing slow download speeds, click Copy to get the link and download it.

• Step 10: Review the Device Model and System Version, then click Unlock Now to proceed.

• Step 11: From the Warning dialogue box, enter the code shown in the text field, then click Unlock.

• Step 12: Wait and refrain from using your device while it’s connected to avoid a bricked device.

• Step 13: Once finished, click Done, then check your iPad. If your Apple ID is not unlocked, you may need to click Try again to restart.

Best Practices To Secure Your iOS Data

Changing your Apple ID on your iPad can be a great way to protect your privacy and security. However, it’s important to take steps to ensure that your iOS data remains safe during the process. Here are some tips to help you do just that:

• Backup Your Files

Before you change your Apple ID on your iPad, create a backup of your data so you don’t lose important files. You can create a backup using iCloud or Dr.Fone.

Dr.Fone also allows you to view the contents of your backup before you restore it, so you can ensure that you’re getting back exactly what you want. This way, you can restore your data to your new Apple ID if needed.

• Password Check

Review your current passwords. Change any weak or compromised ones, including your Apple ID password, and never share it with anyone.

• Avoid Sharing an Apple ID

It’s best practice for each family member to have their own Apple ID. Sharing one can lead to problems with app purchases, data syncing, and privacy.

• Enable Two-Factor Authentication (2FA)

If not already enabled, turn on 2FA for an extra layer of security. It’s simple and highly effective.

Conclusion

Changing your Apple ID on your iPad or other iOS devices is a simple process that can help you protect your privacy and information. With the tips above, you can ensure your iOS data is safe and secure during the switch.

And if you need to remove your Apple ID without a password, Dr.Fone is a good option. Dr.Fone is a powerful iOS toolkit that can help you with various phone solutions. It’s easy to use and can help you solve mobile problems in just a few minutes.