3 Ways to Erase Apple iPhone 13 When It’s Locked Within Seconds

Over the last few years, Apple has made remarkable progress with its flagship iPhone series. There are plenty of ways for users to back up, erase, and restore their data. It doesn’t matter if you are moving from one device to another or would like to reset your phone. You should know how to erase iPhone when locked. Too many times, after getting locked out of their device, users find it hard to wipe locked iPhone. If you are also going through the same dilemma, then don’t worry. Read on and learn how to wipe a locked iPhone in this extensive guide.

Part 1: Erase locked iPhone with Dr.Fone - Screen Unlock (iOS)

One of the best ways to wipe locked iPhone is by using Dr.Fone - Screen Unlock (iOS) tool. It is an extremely secure and reliable application. It is already compatible with every leading version of iOS and runs on almost all major iOS devices. Available for both Windows and Mac, the tool can be used to remove activation lock and Apple ID. The tool also provides an easy-to-use interface that can help you reset the activation lock on your device.

Dr.Fone - Screen Unlock (iOS)

Erase the data of an iPhone even if it is locked

• Erase iPhone data together with the lock screen.
• Remove the 4-digit/6-digit passcode, Touch ID, and Face ID , and activation lock.
• A few clicks and the iOS lock screen are gone.
• Fully compatible with all iDevice models and iOS versions.

4,395,216 people have downloaded it

To learn how to erase iPhone when locked, follow these steps:

Step 1. Download and install Dr.Fone.

Start by downloading Dr.Fone - Screen Unlock (iOS) from its official website. Install it on your Windows or Mac and connect your Apple iPhone 13 to the system whenever you wish to resolve an issue with it. After launching the application, click on the “Screen Unlock” option from the welcome screen.

Step 2. Click Start button.

Wait for a while as the application will automatically recognize your phone. Click on the “Start” button to commence the process.

Step 3. Put the phone into DFU mode.

Follow the on-screen instructions to put your phone into the DFU (Device Firmware Update) mode. It can be done by pressing the Home and Power button simultaneously for 10 seconds. Afterward, it would help if you released the Power button while pressing the Home button for another 5 seconds.

Step 4. Download firmware package.

After putting your device into the DFU mode, the application will automatically move to the next window. Here, you would be required to provide essential information related to your phone like device model, firmware update, and more. After filling in the correct information, click on the “Download” button.

Sit back and relax as the application will download the essential firmware update for your phone.

Step 5. Start to unlock.

Once it is done, the application will automatically start resolving the issue on your phone. Make sure that you don’t disconnect your phone while Dr.Fone - Screen Unlock (iOS) will resolve the issue on your device.

Step 7. Unlock completed.

After completing the operation successfully, the interface will provide the following message.

You can check if you can unlock your phone or not. If you still have an issue, then click on the “Try Again” button. Else, you can safely remove your phone and use it without any constraint. By following this method, you would learn how to wipe a locked iPhone with Dr.Fone - Screen Unlock (iOS).

One of the best things about this technique is that you would wipe locked iPhone without causing any damage. Since it is a secure and reliable method with a high success rate, it is sure to provide a hassle-free experience.

Part 2: Erase locked iPhone by restoring it with iTunes

If you are looking for an alternative way to learn how to erase iPhone when locked, you can also take the assistance of iTunes. It provides a free and simple method to restore your device. Since it would wipe your data, you might end up losing your essential files in the process. We recommend following this technique only when you have taken a backup of your data via iTunes beforehand. To learn how to wipe a locked iPhone with iTunes, follow these steps:

1. Firstly, put your Apple iPhone 13 into recovery mode. To do this, launch an updated version of iTunes on your system and connect it to a lightning cable. Now, long-press the Home button on your device and connect it to the other end of the lightning cable. Release the Home button once the iTunes logo would appear.

2. As soon as your phone would be connected, iTunes will recognize an issue with it. From here, you can choose to restore it.

3. If you don’t get the above pop-up on your screen, launch iTunes and visit its “Summary” section. From here, choose “Restore backup” under the Backup section.

4. agree to the pop-up message by clicking on the “Restore” button.

Part 3: Erase locked iPhone by Find My iPhone

If you haven’t already taken a backup of your phone, then you might find it hard to recover it with iTunes. Another popular way to wipe locked iPhone is by using the Find My iPhone tool. This is mostly implemented in case of a stolen or lost device. One of the best features of Find My iPhone is that it can be used to reset your device remotely. With this, you can protect your personal data without much trouble. Implement these steps to learn how to erase iPhone when locked using Find My iPhone.

1. To start with, log in to your iCloud account and visit the “Find My iPhone” section.

2. Under the “All Devices” section, you can choose the Apple iPhone 13 you wish to reset.

3. After selecting your device, you will be presented with various options. Select the “Erase iPhone” feature to reset your device.

Confirm your choice and wipe locked iPhone remotely using the Find My iPhone feature on iCloud.

After following this informative guide, you would learn how to wipe a locked iPhone without any trouble. Go ahead and pick your preferred option to wipe locked iPhone. We recommend using Dr.Fone - Screen Unlock (iOS) to resolve this issue securely. Though, if you wish to do it remotely, then you can also give Find My iPhone a try as well. If you are familiar with any other reliable method, please let us know how to erase iPhone when locked in the comments below.

4 Ways to Unlock Apple iPhone 13 to Use USB Accessories Without Passcode

How do I unlock my Apple iPhone 13? I know you’re supposed to connect it to the computer and put it in recovery mode but when I do, it says “unlock Apple iPhone 13 to use accessories.”

You may have had the experience of connecting your Apple iPhone 13 to a computer with USB accessories. Usually, “Unlock Apple iPhone 13 to use accessories“ will appear on the screen. In most cases, enter the passcode to unlock the phone, and you can then proceed with data transfer and management. What to do if you forget your screen lock passcode? Here come the most effective methods for you!

Part 1: Why You Need to “Unlock Apple iPhone 13 to Use Accessories”?

The command comes from Apple’s significant privacy safeguard “USB Restricted Mode”. It means after an hour of your iOS device is unlocked, the system cuts off the lightning port and limits it to charging only. Simply put, when your Apple iPhone 13 is locked for more than an hour, it needs to be unlocked to allow the connection of USB accessories. Sometimes, when you unlock your Apple iPhone 13 screen to use USB accessories, it can’t charge anymore.

In 2017, a password cracking tool called GrayKey was launched, which can bypass any iPhone screen lock passcode. The FBI, the police, and some government agencies have all become GrayKey customers. To combat hackers including GrayKey and protect iOS users’ data security, the USB Restricted Mode feature arrived with iOS 11.4.1 in July 2018 and be improved in iOS12.

Part 2: How to Disable USB Restricted Mode?

If you find this warning annoying or your Apple iPhone 13 not charging when using USB accessories, disabling USB Restricted Mode is an optional solution. However, you have to remember the unlock passcode. All the steps will be presented to you next.

• Step 1: Open Settings on your Apple iPhone 13.
• Step 2: Click on Face ID & Passcode (or Touch ID & Passcode), and then input your screen passcode.
• Step 3: Scroll to the bottom of the page and find “USB accessories“ in the “Allow access when locked“ column.
• Step 4: Click the toggle button on the right to disable this feature.

After completing all the steps, your Apple iPhone 13 can connect USB accessories anytime, anywhere. However, it is very common to forget to unlock the passcode. Next, we will recommend four solutions to help you use USB accessories without a passcode.

Part 3: How to Unlock Apple iPhone 13 to Use USB Accessories without Passcode via Dr.Fone?

Now, here comes an amazing App with many benefits to solving the problem for you.  This is Dr.Fone-Screen Unlock, which is very convenient and fast to use. You must be curious about it. More of its advantages will be introduced to you.

• The application is available on both Mac and Windows.
• No technical skills are required.
• It fully supports iPhone X, iPhone 11, and the latest iPhone models.
• Dr.Fone - Screen Unlock can easily unlock 4-digit or even 6-digit screen passcode, Face ID, or Touch ID.
• No Apple ID and password are needed.

Step 1: The first step, of course, is to download Dr.Fone to your computer and click on “Screen Unlock”.

safe & secure

Step 2: Connect your Apple iPhone 13 to the computer with a lightning cable, and choose “Unlock iOS Screen”.

Step 3: Follow the guides to boot your device in Recovery or DFU mode. The Recovery mode is recommended for iOS lock screen removal by default. If you fail to turn on recovery mode, you can turn to activate DFU mode. DFU means Device Firmware Upgrade, and the operation is more mandatory.

Step 4: Click “Start” to download the firmware. After the download is successful, select “Unlock now” and wait a few minutes, the passcode will be removed from your device.

After that, you could set up your Apple iPhone 13 as a new one and unlock your screen to use USB accessories without a passcode.

There is no doubt that you may worry about losing all your data while bypassing the Apple iPhone 13 lock screen. But honestly, there is no tool on the market today that can preserve data to unlock an iPhone. Therefore, it is necessary to back up data in your daily life. Dr.Fone-Phone Backup provides you with a full range of data backup solutions, you can click the link below to learn more.

This guide will teach you about how to unlock iphone using 5 feasible ways.

Part 4: How to Unlock Apple iPhone 13 to Use USB Accessories without Passcode via iCloud?

With iCloud, you can quickly clean up your Apple iPhone 13, remove screen locks, and help unlock your device. But, you have to know that all your data will be erased. Make sure your Apple iPhone 13 has the “Find My iPhone” function enabled, otherwise your device will be offline.

Step 1: Open your computer or another iOS device, and sign in with your Apple account.

Step 2: Click on “All Devices”, choose your Apple iPhone 13, and then “Erase iPhone”.

Now, your Apple iPhone 13 will reboot without a passcode. Then, you can unlock Apple iPhone 13 to use accessories and bypass the passcode.

Part 5: How to Unlock Apple iPhone 13 to Use USB Accessories without Passcode via iTunes?

There is currently no way to unlock an iPhone without erasing all data. Luckily, iTunes can help back up your data before removing it. Please note that this way is only possible if the Apple iPhone 13 device has synced data in iTunes before.

• Step 1: Connect Apple iPhone 13 to a computer with a USB accessory and turn on iTunes. Then iTunes will make a backup for your phone.
• Step 2: Choose “Restore iPhone”.

Wait for a while and you could unlock the screen to use USB accessories. However, in step one, you may need to enter your passcode to get stuck during the process. Therefore, this method is not the most efficient.

Part 6: How to Unlock Apple iPhone 13 to Use USB Accessories without Passcode via Recovery Mode?

If you have forgotten your Apple ID or password and have not synced iCloud and iTunes, you can choose recovery mode. It will remove all your passcode and data as well.

• Step 1: You need to prepare a Mac or PC (Windows 8 or later).
• Step 2: Turn off your Apple iPhone 13.
• Step 3: Put your device in recovery mode. This step might be a little complicated, but don’t worry, we’ll walk you through it step by step.

1. Find the button on your device, it will be useful then.

• iPhone SE (1st generation), iPhone 6s, and earlier: The Home button.
• iPhone 7 and iPhone 7 Plus: The Volume down button.
• iPhone SE (2nd and 3rd generation), iPhone 8, iPhone 8 Plus, iPhone X, and later devices: The side button.

2. Quickly press and hold the button while connecting your phone and computer until the recovery mode appears.

Step 4: Find your tool in iTunes on the computer. Choose Restore and this process will take a few minutes.

Step 5: Unplug your tool and use your Apple iPhone 13 without a passcode.

Now, you’ll get an iPhone which is like being factory reset. And you could unlock the screen to use USB accessories when you forget the passcode.

Part 7: Hot FAQ about USB Accessories on iPhone

Q1: What is the feature of USB Accessories on iPhone?

From USB-A to the latest, USB-C. Also, most iPhones use a proprietary Lightning port.

Q2: Why does My iPhone Think My Charger is a USB Accessory?

It is related to the capacity of the charger. If a low-capacity charger is used, your device must regard it as a USB port because the USB port charges at a lower rate than a good wall charger. Another possibility is that the cable being used is flaky.

Q3: What to Do If My iPhone Not Charging after Unlock to Use Accessories?

• Step 1: Disconnect your tool from the accessory.
• Step 2: Unlock your device.
• Step 3: Connect the USB accessory again.

If it doesn’t work, please contact customer service of Apple.

Conclusion

It is very common to use USB accessories to connect iPhone and computer. Sometimes, we may forget the password, or cannot unlock the screen due to system failure. There are many ways to unlock Apple iPhone 13 to use the accessories in the article. Finally, we recommend everyone to use Dr.Fone - Screen Unlock, a helpful and convenient tool.

safe & secure

3 Ways to Unlock Apple iPhone 13 without Passcode or Face ID

“How to unlock Apple iPhone 13 without passcode? I have forgotten the passcode of My Apple iPhone 13 and can’t seem to unlock it after consecutive efforts.”

If you have been locked out of your Apple iPhone 13 due to different reasons, then you have come to the right place. Lately, many users have told us that their Apple iPhone 13 won’t unlock as they have forgotten the new passcode or bought someone else’s device. No matter the situation, you can learn how to unlock Apple iPhone 13 without a passcode or Face ID.

As an expert, I tried and tested these methods to unlock iOS devices without using the pre-set passcode. So what are you waiting for? Read on and learn how to unlock iPhone X if you forgot its passcode.

Part 1: How to unlock Apple iPhone 13 with a professional tool?

One of the easiest solutions to bypass a locked iPhone is using a dedicated tool like Dr.Fone - Screen Unlock (iOS) . Developed by Wondershare, the tool provides a simple click-through process that can unlock iOS devices easily. It doesn’t matter if the Apple iPhone 13 device is locked after consecutive wrong attempts or you have just forgotten your device’s passcode tool can help you in different situations.

Note： This tool may erase all your data from your iOS devices after unlocking

It is compatible with all the leading iOS devices, including the latest models like iPhone 15. Without any prior technical experience, you can use this tool and fix an Apple iPhone 13 that won’t unlock. Here are some main features of this unlocking tool.

Dr.Fone - Screen Unlock

Remove iPhone Lock Screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone 13 quickly from the disabled state.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS version.

3981454 people have downloaded it

Prerequisites:

Before you proceed, you need to turn off Find My iPhone if it’s enabled. To do this, go to iCloud’s website, log in to your Apple account, and select the “Find my iPhone” service. From all the provided lists of the connected devices, remove your Apple iPhone 13 to disable the Find my iPhone service.

Follow these steps to learn how to unlock Apple iPhone 13 without a passcode.

Step 1: Connect your iOS device to the system

Download Dr.Fone - Screen Unlock (iOS) on your Mac or Windows PC and launch the application. Then go to Toolbox > Screen Unlock > iOS > Unlock iOS Screen to launch the specific tool on a new window.

Using a lightning cable, connect your Apple iPhone 13 to the system. Once your Apple iPhone 13 is detected, click on the “Start” button to commence the process.

Step 2: Put your Apple iPhone 13 in Recovery mode.

You need to put your Apple iPhone 13 in the Recovery mode using the right key combinations. The key combinations would be different for various iPhone models. The interface also provides quick instructions to do the same. Here’s how you can put your Apple iPhone 13 in Recovery mode.

Step 3: Provide basic details of your device

As soon as your Apple iPhone 13 would enter the Recovery mode, the application will detect it automatically. It will display the following window to provide basic details related to your Apple iPhone 13, like its model, iOS version, etc.

After proving the relevant information, click on the “Download” button and wait for a while as the application would download the firmware update for the Apple iPhone 13 device.

Step 4: Unlock your device.

Once the respective firmware update has been downloaded, you will be notified. To fix your Apple iPhone 13 won’t unlock, click on the “Unlock Now” button.

Sit back and wait for a while as the application will restart your device. There won’t be any lock on the Apple iPhone 13 device now, and you can access it without any trouble.

In this way, you can learn how to unlock iPhone without a passcode or Face ID. Though, you should know that the existing data on your phone would be erased. Sadly, there is no solution to unlock an iOS device without deleting its existing data. Therefore, this is a risk you need to take if you wish to unlock your iOS device.

safe & secure

Part 2: How to unlock Apple iPhone 13 with iTunes?

Just like Dr.Fone - Screen Unlock (iOS), you can also use iTunes to fix the Apple iPhone 13 won’t unlock the problem. Though, the solution is not as user-friendly or effective as Dr.Fone’s. You need to take care of some prerequisites before following this technique. Also, to unlock your device with iTunes, you need to put your phone in recovery mode. The key combination would slightly vary among different iPhone models.

Prerequisites:

1. Just like Dr.Fone, this technique will only work if the Find My iPhone service is not enabled on your Apple iPhone 13. You can go to iCloud’s website and disable the feature under the “Find my iPhone” option.
2. Also, you need an updated version of iTunes to make it work. This is because an older version of iTunes won’t be compatible with iOS 13. Go to the iTunes menu, check for updates, and follow the simple on-screen instructions to update iTunes.

Step 1. Put your phone in the Recovery Mode

After meeting the basic prerequisites, you need to put your Apple iPhone 13 in recovery mode by following these steps:

1. Connect your Apple iPhone 13 to the system (Mac or Windows) and launch an updated version of iTunes on it.
2. Press the Volume Up key quickly. That is, press it only for a second and release it.
3. Similarly, quick-press the Volume Down key as well.
4. Once the Volume Down key is released, press the Side button.
5. Keep pressing the Side key until the connect-to-iTunes symbol would appear on the screen.

Make sure that all the key combinations should be pressed consecutively. That is, you should not take an evident pause in between.

Step 2. Restore Apple iPhone 13 in Recovery Mode

As soon as your phone would enter the recovery mode, iTunes will detect an issue with your device and display the following prompt. Click on the “Restore” option and follow the simple on-screen instructions to reset your phone entirely.

Once your phone would be restored, it will be turned on without any existing lock.

Part 3: How to unlock Apple iPhone 13 without a passcode using iCloud?

Another way to learn how to unlock Apple iPhone 13 without a passcode or Face ID is by using iCloud. Instead of turning off the Find my iPhone service, we will use it to erase the Apple iPhone 13 device remotely. Though, you should know your Apple ID and password to implement this technique.

1. Go to iCloud’s official website and log in with your Apple ID and password.
2. From here, click on the “Find my iPhone” service.
3. It will provide a list of all the Apple iPhone 13 devices linked to your Apple account. Select your Apple iPhone 13.
4. Click on the “Erase” button and answer the security question correctly to confirm your choice.

If you get a prompt on your phone regarding the respective actions, agree to it and wait for a while as your phone would be restarted. Since this will erase all the existing data on your phone, you can later use a backup file to restore the lost content.

Part 4: Does the tricking Siri method unlocks Apple iPhone 13?

Lately, there have been a lot of articles about this method. As an expert, I would like to clear the air – you can’t trick Siri to unlock your Apple iPhone 13. In some iPhone models, we could trick Siri into unlocking our device and entering the home page without bypassing the lock screen. The trick worked for a few devices and was an instant hit as it retained our data while unlocking our device.

It was a loophole from Apple’s end, which was present in iOS 10.3. Therefore, if your device is still running on iOS 10.3, then you might give it a try. Sadly, the only way to bypass an Apple iPhone 13 that won’t unlock now is the restore your device (erasing its existing content). Since Apple iPhone 13 currently runs on iOS 14, the trick won’t work.

Part 5: Tips for protecting your Apple iPhone 13 X/Apple iPhone 13 from being unlocked by thieves

It would help if you always protected your Apple iPhone 13 from being misused by others. If your device is lost or stolen, you should make sure that the perpetrator won’t be able to unlock it. If they can bypass the security lock on your phone, then they can easily resell it. To protect your device, we recommend following these suggestions.

5.1 Enable Find my iPhone

This is the most important thing to do to protect your phone from being misused. As you can see, a perpetrator can only unlock your device if the Find my iPhone service is turned off. Therefore, you should make sure that the feature is on. To turn it off, they would need to access your iCloud account first, which would require a lot of effort.

Just go to the iCloud settings on your phone and turn on the “Find my iPhone” service. Also, enable the “Send Last Location” feature. This will automatically send the last location of your device whenever its battery would be critically low.

5.2 Use Find my Friends

Just like Find my iPhone, Find my Friends is a native location-sharing feature developed by Apple. You should have at least 2-3 people with whom you are sharing your location. Go to the Find my Friends app on your device, enable the location sharing feature, and add your close friend and family.

In this way, if your device is stolen, you can track it immediately with the help of your friends.

5.3 Enable two-factor authentication

Your iCloud account should be protected at any cost. By infiltrating your iCloud account, anyone can erase your phone remotely. It is recommended to enable the two-factor authentication on your account to strengthen its security. Go to your device’s Settings > Apple ID > Passcode & Security and enable the two-factor authentication feature.

5.4 Erase data after failed unlocking attempts

This is a crucial setting that you should enable to protect your data from unknown perpetrators. If someone tried to unlock your device and get 10 failed attempts, your data would automatically be erased from your phone.

Go to Settings > Face ID & Passcode and turn on the “Erase Data” option. Though, if you have enabled the option and have forgotten the passcode of your phone, then you should be alarmed.

When you know how to unlock Apple iPhone 13 without the passcode, you can easily fulfill your requirements. Out of all the provided options, Dr.Fone - Screen Unlock (iOS) is recommended. This is because using the Dr.Fone toolkit is extremely easy. You won’t face any compatibility issues or need to have the technical experience to use this reliable tool. Try it for free and download it on your system to bypass a locked Apple iPhone 13 right away.

safe & secure