8 Safe and Effective Methods to Unlock Your Apple iPhone SE (2020) Without a Passcode

You may get stuck with any emergency if you do not know how to unlock your Apple iPhone SE (2020)/iPad without a passcode. It can happen under various circumstances; let’s say, if you change the passcode too often, you may forget the Apple iPhone SE (2020) passcode later; your spouse may change your passcode without telling you; your naughty child accidentally locks your Apple iPhone SE (2020). So, what to do then?

Normally, you don’t believe what you see and start to try entering the passcode to unlock your Apple iPhone SE (2020). However, if you entered an incorrect passcode 10 times, you will receive a messag “iPhone is disabled, connect to iTunes “. In this case, the only way to unlock your disabled iPhone is to restore it. And that is a situation none of us would like to be in right? Hence, in this article, today, we will elaborate ways on how to unlock iPhone without passcode or restore it.

Part 1: Unlocking Your Apple iPhone SE (2020): What Are the 4 Main Causes of Failure?

Unlocking your Apple iPhone SE (2020) can be a frustrating experience, especially when you just want to access the Apple iPhone SE (2020) device. Unfortunately, there are several common reasons why an iPhone may not unlock.

Before you go ahead and take it to a technician for repair, let’s look at the main causes of why you cannot unlock your Apple iPhone SE (2020):

• If you input the wrong passcode too many times, your Apple iPhone SE (2020) will be disabled and locked. To unlock iPhone, you will need to enter the correct passcode. If you don’t remember your passcode, you can try using recovery mode to reset your device.
• When someone else has your Apple iPhone SE (2020) passcode, they can easily reset your Apple iPhone SE (2020) passcode. And you have no idea why you cannot access your Apple iPhone SE (2020). This is a relatively common problem.
• If your Apple iPhone SE (2020) screen is broken, it may be difficult or impossible to unlock the Apple iPhone SE (2020) device. In this case, you may need to take it to an Apple store or authorized service provider to have the screen repaired.
• If your Apple iPhone SE (2020) is in Lost Mode, it will be locked by others, and you will input enter the passcode associated with the Apple ID that was used to set up the Apple iPhone SE (2020) device. If you don’t remember the passcode, then Dr.Fone - Screen Unlock (iOS) will be your ideal choice.

Learn about all the solutions to unlock iPhone quickly through the video below:

safe & secure

For more tutorial videos about how to unlock your Apple iPhone SE (2020), you can explore more from Wondershare Video Community .

Keep reading to learn more feasible ways to unlock iPhone without passcode in detail!

Part 2: How to Unlock iPhone/iPad Without a Passcode? (iOS 7.0 or later)

Dr.Fone - iPhone Unlocker is a powerful software that can help you open your iDevice without a passcode. It supports all iPhone models from iPhone 6 to iPhone 15, and all iPad models. Dr.Fone-Screen Unlock is easy to use and can be used to bypass the lock screen in just a few simple steps. It can also be used to reset the Apple iPhone SE (2020) device to its factory settings, allowing you to start fresh. In this section, we will learn about this important tool for iPhone lock screen removal. Thus, instead of thinking hard about how to unlock iPhone without a passcode, you can use Dr.Fone - Screen Unlock (iOS) to do the needful.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone Lock Screen without Hassle.

• Unlock an iPhone whenever the passcode is forgotten.
• Save your Apple iPhone SE (2020) quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

3981454 people have downloaded it

To use Dr.Fone - Screen Unlock to unlock your Apple iPhone SE (2020) or iPad without a passcode, follow these steps:

• Step 1. Download and install Dr.Fone - Screen Unlock (Windows version ) or (Mac Version ) on your computer.

• Step 2. Go to “Toolbox” > “Screen Unlock” > “iOS” > “Unlock iOS Screen”, then connect your Apple iPhone SE (2020) to your PC.

• Step 3. Follow the instructions to put your Apple iPhone SE (2020) into Recovery mode. When your Apple iPhone SE (2020) is in Recovery mode, the software will begin downloading firmware.

• Step 4. When the process is complete, click “Unlock Now”, and Dr.Fone will start unlocking. After a while, your device will be unlocked, and you can access your device without a passcode.

Unlock your Apple iPhone SE (2020)/iPad without a passcode now!

Part 3: The TikTok Method to iPhone Unlocking Without Using a Passcode or Face ID

There has been a viral trend on TikTok about how to unlock your Apple iPhone SE (2020) without using a passcode or your face ID, no matter which iPhone model you use. These themes of videos quickly racked up almost 9 million views.

This method states that it can enter your phone camera or calculator from the control panel, then without face ID unlocks, your phone can be used as normal.

The concrete steps of this TikTok viral method are below if you want to have a try. Maybe that’s a practical way for your emergency:

• Step 1: Swipe down on your control center (if you just want to test this way whether it works or not, cover your camera). If you are on an older iPhone 5, iPhone 6, iPhone 7, or iPhone 8, then swipe up.
• Step 2: Turn off your Wi-Fi, Data and Bluetooth, and Cellular data. Then turn on Aeroplane mode.
• Step 3: Next, you can open up the calculator app, which is also accessible from the Control Center and doesn’t require any password or fingerprint ID.
• Step 4: Please flip the phone horizontally to access the scientific calculator and type in a decimal place: 7 + 4 + EE = 280,000.
• Step 5: Turn your phone sideways to enter scientific mode, press “IN,” then Press “Rand.”
• Step 6: Swipe up on your device, and it’s unlocked.

Now you should unlock iPhone without passcode without computer or iTunes!

You May Also Like:

What To Do If You Bought A Locked iPhone?

Bypass iPhone Lock Screen Using Emergency Call

Unlock iPhone If It Doesn’t Happen With Correct Password

Part 4: Click “Erase iPhone” on the Lock Screen

This method may be a better choice for unlocking your Apple iPhone SE (2020) than using the TikTok method. It is more secure and reliable, but it works on iOS 15.2 or devices with the latest version. This method can unlock iPhone without computer.

• Step 1: Type a wrong passcode on the Lock Screen.
• Step 2: When the message appears, click “Erase iPhone” and click on it.
• Step 3: Enter your Apple ID credentials.
• Step 4: Click “Erase” to confirm that you want to erase your Apple iPhone SE (2020).
• Step 5: Wait for the process to complete, and your Apple iPhone SE (2020) will be unlocked.

Part 5: Use the Voice Control to Unlock iPhone (iOS 13 or later)

The use of Voice Control to unlock iPhone without passcode is a feature available in iOS 13 or later. Voice Control is a feature that lets you navigate your Apple iPhone SE (2020) using just your voice. It allows you to unlock your Apple iPhone SE (2020) without having to enter a passcode or use Touch ID.

Instead, you can simply say “Hey Siri” followed by a command. Voice Control also allows you to take other actions, such as launching apps and setting reminders.

To use the Voice Control feature to unlock iPhone (iOS 13 or later), you will need to set it up first. To do this, follow these steps:

• Step 1. To set up Voice Control on your Apple iPhone SE (2020), open the Settings app and tap Accessibility.
• Step 2. Tap Voice Control and then tap Set Up Voice Control.
• Step 3. Follow the on-screen instructions to create a voice profile.

When you’re finished, you can use your voice to unlock your Apple iPhone SE (2020). To unlock your Apple iPhone SE (2020):

• Step 1. Say “Hey Siri” followed by “Unlock my iPhone”.
• Step 2. You will then see authenticate using Face ID, Touch ID, or your passcode.
• Step 3. Once you’ve authenticated, your Apple iPhone SE (2020) will be unlocked.

Part 6: How to Unlock iPhone Without a Passcord Using Find My iPhone?

How to unlock iPhone without Siri and passcode using “Find My iPhone” is another method. It just takes several minutes to clean up your device. It securely removes your Apple iPhone SE (2020) lock screen without tapping the passcode. If you want to restore your Apple iPhone SE (2020) data, this is another great method to enable the features in all terms specifically.

You can perform the steps from your Apple iPhone SE (2020) directly to turn on “Find My iPhone.” Follow the below methods for the best result:

• Step 1: Use your computer or someone else’s iOS device, visit icloud.com/find, and sign in with your Apple credentials.

• Step 2: Then, you need to choose the option “All Devices”. If my iPhone is already enabled on your device, you will see your Apple iPhone SE (2020) listed. Simply click on it and choose the option “Erase iPhone.” Then all the data, including the passcode, will be removed from your Apple iPhone SE (2020). Thus, this process unlocks the Apple iPhone SE (2020) without Siri.

Note: Now, your device will reboot without a passcode. It has a strategy to restore your data and reboot into a new iPhone, thus going for a secret passcode to unlock any iPhone.

Part 7: How to Unlock iPhone Without a Passcode With the Finder or iTunes?

After looking at the maybe-trick way of the TikTok viral method and other unlock ways, an official solution from Apple, we also let you know how to fix the disabled iPhone. This method puts your phone into recovery mode with the help of iTunes or Finder on the computer. However, a small lousy side of this method is that it will erase your data along with the passcode.

Before you start, please ensure you have a computer (Mac or PC). If you’re using a PC, ensure it has Windows 8 or later and that iTunes is installed. Then, just follow the steps below to unlock your Apple iPhone SE (2020) without a password with iTunes.

• Step 1: Turn off your Apple iPhone SE (2020) through the following methods according to your Apple iPhone SE (2020) model.

Notice: If your phone is connected to the computer, please unplug your Apple iPhone SE (2020).

• Step 2: Get ready by finding the button on your Apple iPhone SE (2020), as shown in the pictures below. You’ll need to hold in the following step.

• Step 3: Connect your Apple iPhone SE (2020) to the computer where the Finder or iTunes is enabled > Click on iTunes and restore your Apple iPhone SE (2020).

• Step 4: Choose the Restore option when you see a pop-up. Your computer downloads software for your Apple iPhone SE (2020) and begins the restore process. If the download takes more than 15 minutes and your device exits the recovery mode screen, let the download finish, turn off your Apple iPhone SE (2020), and start again.

Notice: Before the Finder or iTunes restores your Apple iPhone SE (2020), it will back up the Apple iPhone SE (2020) data in iCloud. Thus, you can download the restored files after the Apple iPhone SE (2020) device restarts.

Now, you have learned how to unlock a disabled iPhone with iTunes.

Part 8: Try DFU Mode to Bypass iPhone Passcode

DFU mode (Device Firmware Update) is a special mode on an iPhone that allows you to install firmware or software updates. It can also be utilized to bypass the passcode on an iPhone. To use DFU mode to bypass the passcode on an iPhone, follow these steps:

• Step 1. Connect your iDevice to your PC and launch the iTunes app.
• Step 2. Switch off your Apple iPhone SE (2020) and press and hold the Home and the Side/Power button for 10 seconds.
• Step 3. Release the Side/Power button, but continue to hold the Home button until iTunes recognizes your Apple iPhone SE (2020) in recovery mode.
• Step 4. When your iDevice is in recovery mode, you can use iTunes to restore your Apple iPhone SE (2020) and bypass the passcode.

Remember that using DFU mode to bypass your Apple iPhone SE (2020) passcode will erase all data from your device.

Part 9: How to Unlock iPhone Without Passcode by Tricking Siri?

In this part, we give you the solution to unlock your Apple iPhone SE (2020) without a password using Siri. You can consider it a trick or a tip as you wouldn’t be losing your Apple iPhone SE (2020) data. It works to give 100% results in even the most tricky situations.

We had a survey for the iOS 10.3.2 and 10.3.3 versions, and Siri certainly ensured one of the best ways to unlock the Apple iPhone SE (2020) without a passcode. It’s a simple way, and with it, you will have the possibility to be capable of posting and reading messages on Facebook using this Siri concept.

Let us go through the steps below to learn about how to unlock iPhone without passcode by Siri:

• Step 1: To enable the Siri feature on your Apple iPhone SE (2020) device, press and hold the home button. It will immediately activate Siri on your Apple iPhone SE (2020) device. Once it gets activated, it is ready to respond to your voice. Now, ask Siri to open the clock to rectify how to unlock a disabled iPhone. Once it displays the clock on your iOS screen, just touch it to proceed.

• Step 2: The World clock appears with the list of tunes you have to select for the alarm clock.

• Step 3: From that option, you will see the tab “buy more tunes” which straight away informs you to reach the iTunes store.

• Step 4: Just click on the home button to go to the phone’s main screen.

You will see that you can now access your Apple iPhone SE (2020) without the passcode as Siri helped unlock iPhone.

Tips: This is only used for iOS 10.3.2 and 10.3.3. If you have updated your iOS system, we recommend you try the previous methods. To make it easier, just use Dr.Fone - Screen Unlock .

FAQs about iPhone Unlock Issues

1. How to unlock iPhone without the Home button?

You can unlock your device without the Home button if you have an iPhone with a Face ID or Touch ID. To unlock iPhone without Home button:

• Step 1: Simply press and hold the Side/Top button along with either the Volume (+ or -) button until the power off slider appears on the screen.
• Step 2: Drag this slider to turn off your Apple iPhone SE (2020) completely.
• Step 3: Once it is off, press and hold the Side/Top button until you see the Apple logo.
• Step 4: This will then unlock your device.

2. How to unlock the Apple iPhone SE (2020) passcode without data loss?

You can’t unlock an iPhone passcode without losing your data, as doing so would require restoring your device to its factory settings. This will erase all of your personal data, including photos, contacts, and any installed apps. You can use iTunes or iCloud to back up your phone before restoring it.

Once you have backed up your device, you can then restore it using the backup information. That’s how to unlock iPhone without passcode.

3. How to unlock iPhone using the camera?

If you have an older version of iOS (version 9 or earlier), then there is a bug that allows you to unlock your device using the camera. To do this, simply open the Camera app and make sure it’s in selfie mode. Then, hold the Home button until you hear a clicking sound. This will unlock your device without requiring a passcode.

The Bottom Line

Dr.Fone - Screen Unlock (iOS) is a well-known featured software to unlock iPhone without passcode and works instantly after download. We have proven results, and all the methods listed above are user-friendly to the extent that no knowledge of technology is required to unlock the Apple iPhone SE (2020) without Siri. We advise you to use Dr.Fone as it will work on your Apple iPhone SE (2020) without any damage and give the desired result. However, you may choose any of the above iOS unlocking methods as you see fit.

Things You Should Know When Unlocking Total Wireless Of Apple iPhone SE (2020)

Total Wireless is a prominent name when it comes to affordable network carriers. It offers users a wide range of call and data packages. The company also offers smartphones; however, they are carrier-locked. This can become a problem for users who want to switch networks. Users need to learn unlocking methods that seek greater flexibility and control over their phones.

In this article, we go through the essence of unlocking a Total Wireless phone. Our focus is to present a comprehensive overview of the methods and essential details required to unlock your device. It will enable users to make informed decisions and achieve the best possible results.

Part 1. Defining The Total Wireless Phone Terminology

A Total Wireless phone refers to a mobile device that operates on the Total Wireless network. It is a prepaid mobile virtual network operator (MVNO) that uses Verizon’s network infrastructure. These phones are often sold with Total Wireless plans. Moreover, they are optimized to function within its network coverage area. Unlocking a Total Wireless phone can pose challenges due to the Apple iPhone SE (2020) device’s association with a specific carrier.

The difficulty level largely depends on factors such as the phone model, contract status, and carrier policies. Unlock Total Wireless iPhone is indeed feasible under specific conditions. Even so, the procedure might not follow a direct path and is subject to variation on various factors. Like its counterparts, Total Wireless presents distinct guidelines and eligibility criteria for phone unlocking.

Part 2. Looking out the Reasons for Unlocking a Total Wireless Phone

Understanding the details of unlocking a Total Wireless phone opens up many compelling reasons to pursue this task. It enables users to bypass limitations and enjoy the benefits of a more liberated mobile experience. Given below are some of the many reasons why you should go for unlocking a Total Wireless phone:

1. Switching Carriers: Total Wireless phones are often locked to their network, which limits users to their services. Unlocking allows users to switch to other carriers for better plans, coverage, or services that suit their needs.
2. International Travel: On Total Wireless, international roaming options might be limited or expensive. Unlocking the phone enables the use of local SIM cards abroad. This offers more cost-effective communication options during travel.
3. Network Compatibility: Total Wireless phones don’t work with other carriers due to specific network configurations. Unlocking enables these devices to work with a broader range of networks, enhancing usability.

Advantages of Unlocking a Total Wireless Device

Unlocking a Total Wireless phone opens up a lot of advantages. Here are a few of the benefits associated with unlocking Total Wireless iPhone:

1. Flexibility: The freedom to select among different carriers, plans, and services is offered by unlocked phones. It grants users increased flexibility in handling their communication requirements.
2. Cost Savings: Switching to more affordable or better-suited plans from different carriers can result in cost savings. This is especially true for users with specific usage patterns or travel requirements.
3. Improved Resale Value: Unlocked phones generally have higher demand in the resale market. It appeals to a wider range of buyers and potentially fetching better prices.

Part 3. How To Check if Your Apple iPhone SE (2020) Is Already Unlocked?

No need to worry if you’re unsure whether your Total Wireless device is unlocked. You can easily verify its status through a simple SIM test. Here’s a straightforward set of steps to check if your iPhone Total Wireless unlock is already unlocked:

• Step 1. Turn off your device and remove the SIM tray to start. Swap the current SIM card for one from a different carrier and position it in the tray. Reinsert the tray into your device and power it on again.

• Step 2. First, check to see if the SIM card is getting network service. Attempting a call or sending an SMS are alternative methods to test whether your phone is unlocked. If it fails, it suggests that your phone might still be locked to Total Wireless.

Part 4. A Small Checklist to Ensure Before Unlocking Your Total Wireless Phone

Prior to Total Wireless unlock, it’s essential to verify that it meets the specified criteria. Ensure your phone aligns with the requirements by following the provided checklist:

1. Check Contract Status: Ensure your device is not bound by an ongoing contract with Total Wireless. If under contract, complete the contractual obligations, which include payment of fees or early termination charges.
2. Verify Eligibility: Confirm your device’s eligibility for unlocking. Total Wireless requires your device to be at least completed 12 months of service period. Moreover, you need to ensure the Apple iPhone SE (2020) device isn’t reported lost or stolen.
3. Clear Outstanding Payments: Make sure no outstanding payments or dues are associated with your Total Wireless account. These cover any installment plans or unpaid bills involving the Apple iPhone SE (2020) device.
4. IMEI Compatibility: Check if your device’s IMEI is compatible with unlocking services. Moreover, you need to ensure that it is not blacklisted.
5. Backup Your Data: Before initiating the unlocking process, back up all your important data . This includes contacts, photos, and files to prevent any potential loss during the process.
6. Understand Terms and Conditions: Familiarize yourself with the unlocking policies and terms Total Wireless provides. Ensure compliance with their guidelines to avoid complications during the unlocking process.

Part 5. How To Unlock Total Wireless Phone: The Best Methods

You are now armed with an inherent understanding of Total Wireless phones. We discussed the reasons for unlocking a Total Wireless phone free and its prerequisites. Below, the most common methods to unlock a Total Wireless phone are summarized. These will equip you completely to explore the most effective ways to unlock your device.

Way 1. Accessing All Important Carriers

Unlocking a phone to access various carriers involves understanding the unique policies of each carrier. Below are the differing policies of prominent carriers:

AT&T

Instructions. Using a browser, open the att.com/deviceunlock website. Here, choose the “Start an unlock request” option and follow the on-screen prompts to complete the process. AT&T will let you know about the unlock status via the provided email.

T-Mobile

Instructions. Access the T-Mobile website and navigate to the “Contact US” page. Here, choose a way to contact customer service and request device unlocking. If you meet the basic criteria set by T-Mobile, your device will be unlocked.

Verizon

Instructions. Verizon has established a minimum period of 60 days, after which your device will be unlocked. However, it is necessary that you don’t have any outstanding payments. Moreover, your device is not blacklisted is also an essential requirement.

Way 2. Contact the Total Wireless Customer Service

As explained before, Total Wireless requires you to use your device for at least 365 days before you can request device unlocking. Moreover, the Apple iPhone SE (2020) device should be white-listed and should not be reported missing or stolen. These are the simple instructions to unlock Total Wireless phone free:

• Step 1. After ensuring you meet all the criteria, you can contact them by dialing 1-888-442-5102. This number is available throughout the week between 8 A.M and 11:45 P.M EST. Once you reach out, the department will request your IMEI number.
• Step 2. Following that, they will advise you to wait a few days as they need this time to verify your request. They will contact you to unlock your device if you meet their requirements. It is an unlock code for Android devices, while iPhones can be unlocked remotely.

Way 3. Make the Urgency Fee Payment

While the official Total Wireless device unlocking policy requires you to use the Apple iPhone SE (2020) device for at least a year, there are times when it might not be feasible. In such scenarios, you can pay an urgent fee to unlock the Apple iPhone SE (2020) device. Remember that even when paying an urgency fee, you need to have used the Apple iPhone SE (2020) device for at least 60 days.

Way 4. Unlock Your Total Wireless Phone Using SafeUnlocks

SafeUnlocks stands as the premier choice for unlocking your phone. It is committed to delivering unparalleled services, including speed, safety, and affordability. The aim of the superior quality is a guaranteed phone unlocking experience. It boasts a 99.9% success rate and can unlock any phone’s brand without a hassle. Additionally, we specialize in unlocking devices from numerous carriers worldwide. Here’s how to unlock Total Wireless phone using SafeUnlocks:

• Step 1. Begin by accessing the official SafeUnlocks website. Click “Services” from the top toolbar and choose the “Carrier Unlock” option. Provide your name, email, device model, and IMEI number on the following screen.

• Step 2. After ensuring you’ve marked the “I accept the $1 fee for signing up and unlocking my device” box, proceed by tapping “Proceed.” Next, on the following screen, select a payment method and then follow the prompts displayed on the screen.

Bonus Tip. What To Do if Your Apple iPhone SE (2020) Is Locked? Use Wondershare Dr.Fone

Should your Apple iPhone SE (2020) become locked because of forgotten passcodes or any other issues, there’s no need to panic. Wondershare Dr.Fone , a dependable software tool, seeks to rescue the situation. It is a reputable software known for its utility. You can find options to resolve various iOS device-related problems, including unlocking iPhone screens.

Dr.Fone effectively unlocks your iOS devices across various iOS versions, from iOS 7 to iOS 17. It covers various lock types, including touch lock screens, 4-digit/6-digit passcodes, numeric codes, and alphanumeric passcodes. Moreover, it can bypass Face ID, Touch ID, and Screen Time Passcode, among others. With Dr.Fone, you can unlock your iDevices within minutes.

Key Characteristics of Wondershare Dr.Fone

1. This tool can effortlessly bypass the iCloud activation lock without needing the Apple ID.
2. You can find a dedicated option for Data Recovery in Dr.Fone’s service, allowing you to easily recover all types of lost data.
3. It can remove encryption locks from iTunes backups without causing any data loss.

Steps To Unlock Your Locked iPhone Using Wondershare Dr.Fone

This tool ensures a straightforward process without any learning curve. Experience the simplicity of unlocking your Apple iPhone SE (2020) in just a few easy steps:

• Step 1. Initialization and Setup of Screen Unlocking

After installing Wondershare Dr.Fone on your computer, begin by launching the program. Access the “Toolbox” section and find “Screen Unlock”. Choose “iOS” as your device type and proceed by selecting “Unlock iOS Screen .” Initiate the unlocking process by clicking “Start.”

Tips: Are you searching for a powerful iPhone Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

• Step 2. Preparing Devices and Firmware

Follow the prompts on the screen to put your iDevice into Recovery Mode. The platform will automatically detect and showcase the “Device Model.” If necessary, modify the model or System Version accordingly and click “Start.” Monitor the progress of the iOS firmware download on the following screen.

• Step 3. Validation and Completion

Ensure that the downloaded iOS firmware is validated before proceeding. To start the unlocking process, click “Unlock Now”. Enter the required code and tap “Unlock” to continue. Upon successfully unlocking the Apple iPhone SE (2020) device, finalize the process by clicking the “Done” button.

Conclusion

In this comprehensive guide, we navigated through how to unlock Total Wireless phone. It covered its definition, reasons for unlocking, and a checklist before initiating the process. We explored multiple unlocking methods, including carrier-specific policies and third-party services. Additionally, we discussed Wondershare Dr.Fone as the ultimate choice when users encounter device unlocking.

How To Open Your Apple iPhone SE (2020) Without a Home Button

Accidents happen, and sometimes they take a toll on your Apple iPhone SE (2020)’s essential components, like the Home button. Whether it’s a drop, spill, or wear and tear, a damaged Home button can be a problem over time. The frustration peaks when you find yourself locked out, and at a loss.

But fear not, for there are ways to unlock an iPhone without a Home button. This guide explores ways how to open an iPhone without a Home button. In case of a Home button malfunction, explore these quick and easy fixes for a reliable workaround. Read on to learn more.

Part 1. 7 Ways To Unlock iPhone Without Home Button

If your Apple iPhone SE (2020)’s Home button is out of commission, don’t worry. There are several ways to regain access to your device. Let’s explore seven methods on how to unlock an iPhone without a Home button.

Method 1: Unlock the Apple iPhone SE (2020) Without the Home Button via Touch ID

If your device supports Touch ID, you can use your fingerprint to unlock it. Follow the steps:

• Step 1: Head to Settings > Touch ID & Passcode. Next, tap Add a Fingerprint.

• Step 2: Follow the on-screen instructions to set up Touch ID.

_Note__:_ Please be aware that this approach is effective only when you can still navigate through your Apple iPhone SE (2020)’s settings. If that’s not the case, proceed to the following method.

Method 2: Unlock the Apple iPhone SE (2020) Without the Home Button via the Rest Finger to Open

Building upon the initial method, this resolution is effective only if you have previously configured Touch ID. To unlock an iPhone without using the Home button, you can activate the Rest Finger to Open feature. Ensure that Touch ID is permitted for unlocking your Apple iPhone SE (2020), and then follow the steps below:

• Step 1: Go to Settings > General > Accessibility > Home Button.

Step 2: Toggle the switch next to Rest Finger to Open to enable this feature.

Method 3: Unlock the Apple iPhone SE (2020) Without the Home Button via AssistiveTouch

The alternative solution for how to open an iPhone without the Home button but with AssistiveTouch. The feature is designed to simplify iPhone usage. It allows various actions without pressing the Home button or other physical buttons. Here’s how.

• Step 1: Go to Settings > General > Touch > Accessibility, and activate AssistiveTouch. The action will display the AssistiveTouch menu button on your screen.

• Step 2: A floating grayscale button will emerge on your screen after verification. Tap on it. A contextual menu will display, offering options to emulate the functions of your Home button.

• Step 3: Tap Customize Top Level Menu under Assistive Touch and choose Home. The action will guide you to the Apple iPhone SE (2020) passcode screen. From here, you can input your passcode to unlock the Apple iPhone SE (2020) without using the Home button.

Method 4: Unlock iPhone Without Home Button via Dedicated Tool

Unlocking your Apple iPhone SE (2020) without a functional home button becomes effortless with Wondershare Dr.Fone - Screen Unlock (iOS). It’s a specialized tool designed to handle various lock screen issues. Here’s a comprehensive list of key features to get you started:

• **Remove all types of Lock Screens.**Fone Screen Unlock (iOS) can bypass various lock screen types, including passcodes, Touch ID, and Face ID.
• **Bypass Apple ID without a password.**If your Home button is compromised, and you can’t enter the Apple ID password, Dr.Fone can bypass it.
• The tool is compatible with all iPhones equipped with a Home button, ensuring versatility across multiple iPhone models.
• **High success rate.**The platform boasts a high success rate in unlocking devices and follows a straightforward 3-step process.

How To Unlock iPhone Without Home Button With Dr.Fone

Dr.Fone - Screen Unlock (iOS) simplifies the process of unlocking your Apple iPhone SE (2020) without a functional Home button. Follow the steps below:

• Step 1: Visit the official Dr.Fone website and download software. Install the software on your computer and launch it. Next, click Toolbox > Screen Unlock > iOS. Connect your Apple iPhone SE (2020) using a USB cable and choose Unlock iOS Screen. Ensure the software recognizes your device.

• Step 2: Click Start and follow the on-screen instructions. Dr.Fone will automatically detect your device and provide the appropriate firmware package for download. Confirm and proceed.

• Step 3: Once the firmware is downloaded, Dr.Fone will verify it. Confirm the details and click Unlock Now to begin the unlocking process. Follow the on-screen instructions once more.

• Step 4: The software will remove the lock screen from your Apple iPhone SE (2020). Click Try again if your Apple iPhone SE (2020) is still locked. Otherwise, click the Done button. After successful unlocking, set up your Apple iPhone SE (2020) as new. You can now unlock your Apple iPhone SE (2020) without the Home button.

Method 5: Unlock iPhone via Erase iPhone Features (iOS 15.2)

With iOS 15.2, Apple introduced the Erase iPhone feature, aiding users in resetting devices with forgotten passcodes. The functionality applies to iPhones connected to the network with a broken Home button. Compatible devices include iPhone 6 series, iPhone SE series, and newer models. However, it comes at the cost of erasing all content and data on the Apple iPhone SE (2020) device. Follow the steps:

• Step 1: Power on your Apple iPhone SE (2020) by tapping the Power button, then enter the wrong passcode multiple times until the Erase iPhone button appears at the bottom right corner of the screen.

• Step 2: Tap the Erase iPhone button and input your Apple ID passcode to initiate the process. Once the Apple logo displays on your Apple iPhone SE (2020) screen, you can now access your device without the need for a passcode.

_Note__：**_**Keep in mind that all previous content and data on the phone will be erased during this operation.

Method 6: Unlock iPhone via iTunes/Finder

For Mac or Windows users, both Finder and iTunes can unlock your Apple iPhone SE (2020) without the Home button. Windows or Mac Mojave users are recommended to use iTunes. Mac Catalina and newer users should use Finder. Before using iTunes or Finder, it’s advisable to back up your Apple iPhone SE (2020) on iCloud. Here’s how to proceed:

• Step 1: Put your Apple iPhone SE (2020) in the recovery mode and connect it to the computer. Launch Finder or iTunes for Windows or Mac Mojave users.

• Step 2: A window in Finder will prompt you to choose between restoring or updating; click Restore. Confirm your action by tapping Restore again. Upon completion, your Apple iPhone SE (2020) will be unlocked without the Home button.

Method 7: Unlock iPhone via iCloud

If none of the methods work or Dr.Fone is unavailable to you for some reason, then you can use iCloud. To unlock your Apple iPhone SE (2020) without the Home button, visit iCloud.com and sign in with your Apple ID. Next, go to Find My iPhone, select your device, and choose Erase iPhone to unlock it remotely.

Part 2. What To Do if Your Home Button Is Broken

When faced with a broken iPhone Home button, several quick fixes and solutions can sometimes help. Here are some effective measures before considering professional assistance:

Recalibrate the Home Button

Go to Settings > General > Accessibility and toggle the Bold Text switch. Restart your Apple iPhone SE (2020), and this may recalibrate the Home button.

Restore iPhone Firmware

In extreme cases, restoring the iPhone firmware can resolve Home button issues. Tools like Dr.Fone offer a comprehensive solution to restore firmware and address various lock screen challenges.

Clean the Home Button

Dust and debris can affect the Home button’s functionality. Gently clean the area around the button using a small, soft brush or compressed air.

Use the Charger to Press Against the Home Button

This unconventional method involves using the charging cable to apply gentle pressure on the Home button. Be cautious to avoid excessive force.

Visit the Apple Store if Covered by a Warranty

If your Apple iPhone SE (2020) is still under warranty, visiting an Apple Store is advisable. Apple’s warranty covers hardware issues, including malfunctioning Home buttons.

Conclusion

A broken iPhone Home button need not spell disaster. Embrace the solutions discussed and try the best solution available. Enable AssistiveTouch, recalibrate the Home button, clean the area, or even visit an Apple Store if under warranty.

For a comprehensive fix, consider Dr.Fone Screen - Unlock iOS if data loss is a concern. The tool can easily handle unlocking an iPhone without a functioning Home button. It ensures a hassle-free experience. Pick the method that meets your needs best, and regain full access to your device. The power to unlock an iPhone without a Home button is within your grasp.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!