How to Access Your Apple iPhone SE (2020) When You Forget the Passcode?

We all have secrets in our iPhone or some important financial or business data that we all wish to protect from unwanted access. For this, we set up a passcode. But what if Apple iPhone SE (2020) passcode is forgotten by you? Well, you may now wonder how to perform Apple iPhone SE (2020) passcode bypass, right? Worry no more! We’re right here to help you with the proven solutions for Apple iPhone SE (2020) passcode reset without iTunes or with it too. Let’s explore.

Part 1. Unlock Apple iPhone SE (2020) screen passcode in one click (unlock tool needed)

The first and the ultimate measure for Apple iPhone SE (2020) passcode removal in just a matter of a single click is Dr.Fone - Screen Unlock (iOS) . With the help of this mighty tool, performing Apple iPhone SE (2020) passcode reset is even easier than any other alternative. Not only it can perform Apple iPhone SE (2020) passcode bypass, you can also make use of this tool to bypass lock screen of an Android smartphone too. Isn’t it amazing? Moreover, this powerful tool works effortlessly with the latest iOS 13 version and even with the most recent iPhone models as well. Here is the step by step tutorial on Apple iPhone SE (2020) passcode bypass.

Step 1: Install and launch Dr.Fone - Screen Unlock (iOS)

Get the tool Dr.Fone - Screen Unlock (iOS) downloaded and installed over your computer system. Then establish a connection between your computer and iPhone.

Now, launch the tool and then opt for the “Unlock” tile from the main screen.

Step 2: Boot in Recovery/DFU mode

Next move that you need to perform is to opt for the correct mode, i.e. “Unlock iOS Screen”. Then, you’ll be prompted to boot your device in Recovery/DFU mode. The on-screen instructions will guide you on how to do it.

Step 3: Double-Check iPhone information

On the upcoming screen, you’ll be displayed the “Device Model” and most recent “System Version” which is compatible with your Apple iPhone SE (2020). Simply, hit the “Start” button here.

Step 4: Perform Apple iPhone SE (2020) passcode removal

Once, the software downloads the firmware automatically, you can then proceed to Apple iPhone SE (2020) passcode reset. Hit the “Unlock Now” button over the next screen and in a short while you’ll be notified that Apple iPhone SE (2020) passcode removal is completed.

safe & secure

Part 2. Restore an iTunes backup for Apple iPhone SE (2020)

Here we’re going to be familiar with the Apple iPhone SE (2020) passcode reset using the renowned iOS data management tool, iTunes. But be sure that iTunes version installed over your computer is up to date or else unknown errors may crop up in between. Eventually, your all-new Apple iPhone SE (2020) may even get bricked. Think this is it? Well, here’s another problem with iTunes, you need to get your Apple iPhone SE (2020) connected only to a pre-synced or pre-trusted computer. Or else, this tutorial won’t bring any good to you.

Step 1: First, get your Apple iPhone SE (2020) connected to your PC. Then, launch the iTunes most recent version. It will automatically detect your Apple iPhone SE (2020). Once detected, tap the “Device” icon over the left top corner of iTunes.

Step 2: Then, hit the “Summary” option from the left panel and then you need to hit the “Restore iPhone” button. Confirm your actions by simply pushing the “Restore” button on the pop-up message and you’re done. Now, just wait for the process to complete.

Part 3. Restore Apple iPhone SE (2020) in recovery mode to remove screen passcode

If somehow, the above solution fails and you’re just not able to get Apple iPhone SE (2020) passcode reset. You need to boot your device into recovery mode and then perform the factory reset. This would certainly wipe off everything from your Apple iPhone SE (2020) including the passcode as well. Here are the steps involved in booting your Apple iPhone SE (2020) in recovery mode.

• First things first, power off your Apple iPhone SE (2020) by pushing the “Side” button down along with either of the “Volume” button. Keep them pressed till you get to see “Power-off” slider over your screen. Now, simply drag it to power off your device.
• Next, connect your Apple iPhone SE (2020) and your computer firmly with the help of an authentic cable. Please make sure to press and hold the “Side” button meanwhile.
• Ensure not to let go the Side button till the recovery mode screen appears over your Apple iPhone SE (2020).

• Once the Apple iPhone SE (2020) device is booted in recovery mode, iTunes will throw a pop up message that “iTunes has detected an iPhone in recovery mode”. Simply, hit the “OK” button over the message and then push the “Restore iPhone” button followed by confirming your actions.

Part 4. Use “Find iPhone” from iCloud

The next pro tutorial for Apple iPhone SE (2020) passcode removal is via iCloud. For this, grad access to any computer available on your side. Or, you can also make use of any other smartphone device but ensure it must be connected to a WiFi network or have an active data pack. Moreover, the locked iPhone on which you’re going to perform Apple iPhone SE (2020) passcode reset should also have an active internet connection to make this tutorial work.

Note: Since we’re going to unlock your Apple iPhone SE (2020) using Find My iPhone service of iCloud. It is important that “Find My iPhone” service was enabled beforehand over your Apple iPhone SE (2020).

Step 1: Launch the browser over any other smartphone device or computer. Then, visit the official web page iCloud.com.

Step 2: Now, make use of same Apple account configured with your Apple iPhone SE (2020) to sign in to iCloud. Then, opt for the “Find My iPhone” icon over the launch pad.

Step 3: Next, tap on the “All Devices” drop-down menu available over the top midsection and then select the Apple iPhone SE (2020) that you wish to bypass the passcode off.

Step 4: Then, you’ll get to witness a pop-up window over your screen. Tap the “Erase iPhone” button over it and then confirm your actions. All the settings and data will be wiped off remotely from your Apple iPhone SE (2020) now.

Step 5: Lastly, wait for the process to complete and upon completion set up your device as usual.

Part 5. How about Apple iPhone SE (2020) restrictions passcode?

Apple iPhone SE (2020) restrictions is a vital setting that is used to lock down a set of functions of the iPhone. These iPhone restrictions are also known as Parental Controls. That implies one can make use of these settings to block or hide songs that have explicit lyrics/content or barring YouTube from running, etc.

It is vital to set up a 4 digit passcode if you want to use iPhone restriction settings. Now, if you somehow forgot the passcode that was set to make use of iPhone restrictions, you need to restore your Apple iPhone SE (2020) with the help of iTunes to remove the previous passcode. But ensure not to restore an old backup of iPhone or else, the old passcode which you may not know will also get activated. Eventually, making your situation even worse.

Reset/Change Apple iPhone SE (2020) restrictions passcode

Now, in case you know the Apple iPhone SE (2020) restrictions passcode and just wish to reset it. Then follow the streak of steps mentioned below.

1. Launch “Settings” of your Apple iPhone SE (2020) and then get into “General” followed by “Restrictions”. Now, you’ll be asked to key in the current passcode.

1. Once you’ve entered the current passcode, hit on the “Disable Restrictions” and to confirm your actions, key in your passcode when prompted.

1. Lastly, hit on “Enable Restrictions”. You’ll be asked to set up a new passcode now. Do it and you’re done.

How To Fix Auto Lock Greyed Out on Apple iPhone SE (2020)

Auto-lock on iOS devices serves multiple purposes - it conserves battery life, secures your data, and more. But have you encountered the Auto-Lock greyed-out dilemma, fixed at 30 seconds? When this setting becomes inaccessible, it limits your control over screen timeout.

Read on if you’ve encountered a similar problem on your iOS device. In this guide, we’ll explore the possible reasons and offer steps to fix Auto-Lock greyed out on iPhone and iPad devices. If force restarts or settings resets haven’t worked for you, we’ve got alternative solutions. Let’s get started.

Part 1: Why Is Auto-Lock Greyed Out on iOS Device?

There are a few reasons why the Auto-Lock might be greyed out on your Apple iPhone SE (2020) or iPad device, preventing you from adjusting the duration. Here are the most common culprits:

Low Power Mode

When you activate Low Power Mode on your iOS device, you might notice the screen automatically locking after 30 seconds of inactivity. This quick sleep setting, implemented to minimize power usage, explains why the Auto-Lock option appears greyed out and inaccessible.

Screen Time Restrictions

Screen Time restrictions can impact Auto-Lock. For instance, if your downtime schedule blocks all apps, the screen locks itself, even if the Auto-Lock timer hasn’t run out.

MDM Profile Restrictions

If the Auto-Lock is greyed out on your iPad or iPhone and you use it for work or school, a Mobile Device Management (MDM) profile might be the reason. This profile restricts settings, including Auto-Lock. To fix this, contact your IT administrator and ask if they can adjust the MDM profile settings.

Alright, you know the possible reasons why the Auto-Lock option is not working on your iOS device. Still, you might be wondering how to fix the Auto-Lock greyed-out issue. Below are several ways to get your iPad or iPhone Auto-Lock working normally again.

Fix No.1: Disable Low Power Mode

Your iPhone Auto-Lock greyed out because Low Power Mode limits background activities, including the Auto-Lock option. In this mode, you cannot change the Auto-Lock settings. Turn off Low Power Mode to fix this issue and choose your preferred timeout. Here’s how:

• Step 1: Go to your Apple iPhone SE (2020) or iPad’s Settings app.
• Step 2: Scroll down and tap Battery. It will show you your device’s battery usage and available settings.
• Step 3: Turn off the Low Power Mode. Now, the greyed-out Auto-Lock option in Settings should be available again.

Low Battery Mode can stretch your battery life further. But if you need your screen to stay on longer, like while reading an article or watching a video, you can turn it off. It lets you adjust the screen timeout in Settings so it stays awake for as long as you like.

Fix No.2: Check Screen Time Restrictions

You’ve ruled out the Low Power Mode, but the Auto-Lock greyed out on iPad or iPhone remains. If Low Power Mode isn’t causing the problem, your screen time settings might be the issue. Some app restrictions can limit your screen use to specific times, causing it to lock automatically. Resolve this by removing limits, such as downtime and app restrictions, or turning it off.

• Step 1: Open the Settings app on your iOS device.
• Step 2: Go to Screen Time, then scroll down.
• Step 3: Tap Turn Off Screen Time.

Fix No.3: Remove MDM Configuration Profile

A configuration profile is a file that contains settings and restrictions that can be applied to an iOS device. Organizations, schools, or IT administrators often use it to manage devices remotely and enforce specific configurations. Once installed, the settings within a profile override the Apple iPhone SE (2020) device’s default settings. It can include restrictions related to security, network access, app usage, and more.

Since an MDM configuration profile causes limitations, like the greyed-out Auto-Lock on iPad, removing it can be the solution. Doing so frees your iOS device from external settings imposed by the profile. Then, it could allow you to adjust the Auto-Lock time setting as you normally would.

• Step 1: See the configuration profiles you installed on your iOS device.

• Go to Settings> General > VPN & Device Management on your Apple iPhone SE (2020).

• Go to Settings> General > Profiles & Device Management on your iPad.

• Step 2: Select the configuration profile you need to delete.

• Step 3: Tap Remove Profile, enter your device passcode, then tap Remove.

Fix No.4: Remove Network Settings Installed by MDM

Businesses often use Mobile Device Management (MDM) to remotely manage their employees’ iPhones and iPads. MDM lets IT admins push software updates, restrict apps, and remotely wipe a lost device. This keeps corporate data safe and devices under control, whether the company or the employee owns them.

If you’re having trouble with a greyed-out Auto-Lock timeout setting, disassociating your device from MDM might be an option. But remember, this is a big step. Make sure you follow your company’s authorized procedures to avoid unintended consequences.

If your IT team gives the green light, you might also be able to remove the network settings installed by MDM. Just proceed with caution, as messing with these settings could lead to instability or data loss. Here’s how:

• Step 1: Open the Settings app on your iOS device.
• Step 2: Navigate to General > Profile or VPN & Device Management (or a similar section).
• Step 3: Select the management and tap Remove Management.

If the option is unavailable, only the person who used Apple Configurator 2 or handles your company’s mobile device management platform can remove it.

Fix No.5: Use Dr.Fone To Bypass MDM Lock Without Data Loss

Unfortunately, manually removing profiles can be tricky, especially if they’re associated with MDM, Apple School Manager, or supervised configurations. These often require the removal of passwords, admin privileges, or complete data wipes. But there’s good news. Wondershare Dr.Fone - Screen Unlock (iOS) provides a simpler and safer solution.

Here’s why you should try it:

• **Speedy and Efficient:**No more endless troubleshooting. Dr.Fone bypasses the MDM lock in minutes, saving you precious time.
• **Data Stays Safe:**Unlike factory resets, Dr.Fone keeps all your precious photos, messages, and apps right where they belong.
• **No Jailbreaking:**Say goodbye to complex hacks and warranty voiding. Dr.Fone works without jailbreaking your Apple iPhone SE (2020), keeping it healthy and secure.
• **Universal Compatibility:**Whether you own the latest iPhone with iOS 17 or an older version, Dr.Fone has your back. It supports all iOS devices and versions starting from iOS 7.0.

Have you ever bought a used iPad or Apple iPhone SE (2020) to find the Auto-Lock option greyed out and isn’t working? Mobile Device Management (MDM) profiles, often deployed by companies or schools, can restrict functionality. If you lack the credentials to bypass or remove it, Dr.Fone can help remove all MDM restrictions on your iOS device. Here’s how:

• Step 1: Download and open Dr.Fone on your computer. Next, connect your Apple iPhone SE (2020) or iPad to the computer using a USB cable and navigate to Toolbox > Screen Unlock > iOS.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

• Step 2: Within the Screen Unlock tool window, select Unlock MDM iPhone.

• Step 3: Select Bypass MDM, then click Get Start to proceed.

• Step 4: Please review the message carefully before initiating the MDM bypass process. Once you’ve read it, click Start to Bypass to proceed.

• Step 5: If prompted, go to your device’s Settings > Apple ID > iCloud and turn off the Find My feature. Next, click OK to initiate the MDM bypass.

• Step 6: The software will display the progress of the bypass. Wait for it to complete.

• Step 7: You’ll see a confirmation message once the bypass is successful. Click Done to exit. Your device should now be free from MDM restrictions.

Fix No.6: Check and Adjust Auto-Lock Settings

Once you’ve tried all the fixes above, you might need to set up the Auto-Lock timeout again.

1. Setup Auto-Lock on iPad

Here are the steps on how to change Auto-Lock on iPad devices:

• Step 1: Within the Settings app, scroll down the list on the left-hand side and tap Display & Brightness.
• Step 2: On the right-hand side of the Display & Brightness screen, tap the Auto-Lock option.

• Step 3: A list of time options will appear, ranging from 2 minutes to 15 minutes, as well as Never. Select the time you want your iPad to wait before automatically locking the screen after inactivity. If you want the screen to stay on indefinitely, choose Never.

Step 4: Once you’ve selected your preferred auto-lock duration, you can exit the Settings app. The change will be applied automatically.

1. Setup Auto-Lock on iPhone

Here’s how to change Auto-Lock on iPhone devices:

• Step 1: Open the Settings app.
• Step 2: Tap on Display & Brightness, scroll down, and tap Auto-Lock.
• Step 3: Choose the desired time interval for your Apple iPhone SE (2020) to automatically lock. The available options typically range from 30 seconds to 5 minutes. You may also have the option to select Never if you prefer to have the screen stay on indefinitely until you manually lock it.

Conclusion

There you have it. This guide has equipped you with the knowledge and solutions to fix the Auto-Lock greyed out on your Apple iPhone SE (2020) or iPad devices. From identifying the reasons like Low Power Mode and MDM configurations to implementing actionable fixes, you can now change your screen timeout. So, turn off those restrictions, remove MDM profiles, and head back to Settings.

For an easy solution, use Dr.Fone Screen Unlock to bypass MDM restrictions, giving you control over your device. Whether it’s a work phone or a personal device under MDM, Dr.Fone can offer an efficient solution. With a few clicks, you’ll have the Auto-Lock back on track, ensuring your iOS device works again just how you want it.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

How to Remove and Reset Face ID on Apple iPhone SE (2020)

Did you go wrong when you set the Face ID the first time? Or are you tired to put off the mask to use Face ID to unlock your Apple iPhone SE (2020)? And now, you want to disable the Face ID. Whatever your reasons are, read this article to learn how to remove Face ID on your Apple iPhone SE (2020) X, iPhone XS, iPhone XR or iPhone 11, iPhone 12, iPhone 13, iPhone 14, anmd iPhone 15.

Part I: What is Face ID?

If the new Apple iPhone SE (2020) is your first-ever iPhone, or if you have neither upgraded your Apple iPhone SE (2020) from the 6/7/8 series nor have kept abreast with the happenings in the Apple world, you might wonder what this newfangled thing called Face ID is.

Face ID is an authentication system that came with iPhone X for the first time, and then the Apple iPhone SE (2020) 13, the Apple iPhone SE (2020) 14, and now the Apple iPhone SE (2020) 15. Like Touch ID that uses your fingerprints, Face ID uses your face metrics to authenticate you for everything, the way Touch ID does.

Face ID is not a new and advanced version of Touch ID, but a completely different authentication system that utilizes a different component what Apple calls a TrueDepth camera to scan your face metrics. Face ID is not available on phones with Touch ID (iPhone SE 2022 today) and Touch ID is not available on iPhones that come with Face ID as their authentication mechanism.

Part II: What Can You Do with Face ID?

Most of us know that we can unlock iPhone with our face via Face ID instead of a thumbprint or passcode. But actually, Face ID does more than just that. Let us learn more cool things you can do with Face ID, which helps you to make a decision if you still want to disable it. Here‘s what you can do on your Apple iPhone SE (2020) 13/12/11 with Face ID:

II.I Unlock Your Apple iPhone SE (2020)

As an authentication mechanism, Face ID enables you to unlock your Apple iPhone SE (2020) 13 /iPhone 12/iPhone 11 with a look. How to do that? Here are the steps:

Step 1: Pick your Apple iPhone SE (2020) up in your hands or tap the screen to wake it up.

Step 2: Look at the iPhone.

When the lock symbol changes to the unlocked position, you can swipe up to unlock your Apple iPhone SE (2020) using Face ID and get to the Home Screen.

Note that Face ID will not work in landscape mode on an iPhone.

II.II Making Purchases Using Face ID on Your Apple iPhone SE (2020)

Face ID allows you to authenticate yourself to make purchases in the App Store, Book Store, and iTunes Store and use Apple Pay wherever supported.

How to use Face ID on Apple iPhone SE (2020) to make purchases in App Store, Book Store, and iTunes Store

Step 1: Check if Face ID is enabled for purchases in these stores by going to Settings > Face ID and Passcode and ensuring that iTunes and App Store are toggled On.

Step 2: On any of these stores, when you tap on the option to buy some content, a payment confirmation popup will be displayed along with instructions to authenticate yourself using Face ID.

The instructions are simple: press the side button twice to authenticate yourself using your Face ID and make the purchase.

When done, a satisfying ting and a checkmark will confirm the action.

How to use Face ID on Apple iPhone SE (2020) to pay with Apple Pay

Step 1: If Apple Pay is supported by banking institutions in your country, you can set it up by adding a supported bank‘s credit card, debit card, or prepaid card to the Wallet app on your Apple iPhone SE (2020) 13/12/11.

Step 2: When a card is added and ready to use, check that Apple Pay is enabled under Settings > Face ID and Passcode.

Step 3: For App Store/ Book Store/ iTunes Store purchases, it works as always, you double-press the Side Button to authenticate and use your default card.

Step 4: Look at your Apple iPhone SE (2020) to authenticate yourself using your Face ID and make the purchase.

Step 5: When paying at retail outlets, hold your Apple iPhone SE (2020) (top being close to the reader) and wait for the checkmark and Done message.

Step 6: To pay using Apple Pay on websites, choose Apple Pay as the payment method, double press the Side Button, look at your Apple iPhone SE (2020), and wait for the Done message and checkmark to finish the process.

II.III Lowering Ringer and Alarm Volume Automatically

Face ID also enables what Apple calls Attention Aware features that are conveniences afforded to users who have a Face ID enabled iPhone.

Setting up and using Attention Aware features is easy:

Step 1: Go to Settings > Face ID and passcode.

Step 2: Toggle Require Attention For Face ID On.

Step 3: Toggle Attention Aware Features On.

That‘s it. Now, when you get a call and your Apple iPhone SE (2020) 13 is ringing loud, looking at your Apple iPhone SE (2020) 13/12/11 will cause it to lower the volume. When an alarm goes off, you can lower the volume by simply looking at your Apple iPhone SE (2020). Additionally, your Apple iPhone SE (2020) screen will not dim or switch off for the duration you are looking at it. This means you can now read those books on Kindle without constantly tapping the screen for it to stay awake.

II.IV Filling Passwords in Safari Automatically Using Face ID

Face ID also allows users to fill passwords in Safari automatically for a faster and more convenient login experience on your Apple iPhone SE (2020) with Face ID.

Step 1: Go to Settings > Face ID and Passcode and toggle Password Autofill On.

Step 2: Now, when you use Safari to open a website that requires a login, tapping the username field or password field will bring up the keyboard, and on top of that keyboard there will be your credentials for the website if you have saved them in iCloud Passwords. Tap the credentials.

Step 3: Look at your Apple iPhone SE (2020) to authenticate yourself with Face ID and Safari will autofill the credentials for you.

II.V Animojis and Memojis

Up until now, we saw how Face ID enables productivity features and how convenient it is to use it. Now, we come to the fun part - Animojis. Apple launched Face ID in 2017 on the Apple iPhone SE (2020) X with much fanfare and a huge part of that fanfare was Animojis. Over time, Apple brought new capabilities to the Apple iPhone SE (2020) and added Memojis alongside Animojis.

Animojis are animated emojis. These are made possible with advanced algorithms enabled by the TrueDepth camera in Face ID. Animated emojis or Animojis can mimic your facial expressions and you can use them in your message conversations in apps.

Here‘s how to send Animojis in conversations on your new iPhone 13/12/11:

Step 1: Open a message conversation in the Messages app.

Step 2: Tap the Memoji button (a character in a yellow frame) and swipe to select the desired Animoji/ Memoji you want to send.

Step 3: Tap the Record button and you now have 30 seconds to do what you want with your face and the character will reproduce it on screen for you.

Step 4: When done, the Record button changes to Send:

Tap Send to send your first Memoji/ Animoji.

Part III: How to Remove Face ID on Apple iPhone SE (2020)

For all the hardware and software that make for a great experience for nearly all users around the world, Face ID can have its fair share of issues. Sometimes, your face might not get recognized, sometimes it might not work altogether.

Lately, with the COVID-19 pandemic, we have seen how Face ID struggles to work for us, and why? Because it cannot scan our faces with masks! So, it makes sense to remove Face ID from our iPhones and rely solely on passcodes. Alternatively, you want to reset your Face ID on your Apple iPhone SE (2020) 13/12/11 and set it again if you have put on some ‘COVID weight’ owing to working from home.

Most of the time, the best and the simplest thing you can do to resolve your hardware and software issues is to restart the Apple iPhone SE (2020) device in question. To restart your Apple iPhone SE (2020) 13/12/11, long-press the Side Button until the power slider appears and drag it to shut the Apple iPhone SE (2020) device off. Then, use the Side Button to start the phone again.

Sometimes, the issues have a way of persisting, and a restart does not resolve them. the TrueDepth system might have developed a fault and Face ID might stop working. Or you got the dreaded “problem detected with TrueDepth camera” message on your Apple iPhone SE (2020) 13/12/11. In that case, you would like to know how to reset and remove Face ID on your Apple iPhone SE (2020) 13 to see if that helps, before you are required to go to an Apple Store for service.

Step 1: Go to Settings > Face ID and Passcode.

Step 2: Scroll and tap the option “Reset Face ID” to remove Face ID on your Apple iPhone SE (2020) 13/12/11.

Part IV: How to Set Up Face ID on Your Apple iPhone SE (2020)

Sometimes, you may just want to disable Face ID temporarily or the issue gets solved, and want to activate Face ID again. Setting up a Face ID on your Apple iPhone SE (2020) 13 is easy. To set up Face ID, sit in a comfortable spot with adequate lighting and follow these steps:

Step 1: Go to Settings > Face ID and Passcode and enter your passcode. If you have not set up a passcode yet, you will necessarily have to create one now before proceeding forward.

Step 2: Tap Set Up Face ID to start the process.

Step 3: Hold your Apple iPhone SE (2020) in the portrait orientation at about an arm‘s length away from your face and then tap Get Started.

Step 4: Adjust to have your face inside the shown circle and then slowly rotate your head in a smooth motion to complete the circle. This step will be done one more time.

Step 5: When done, tap Done.

In case you are getting the following error:

There are a few things you can try to resolve this, you can try to update your Apple iPhone SE (2020) 13/12/11 to the latest iOS. At this point, you may even try running a beta version to see if that helps. If you are running a beta version, you may downgrade back to the release version to see if that resolves the error. Betas can both make and break things.

If this does not resolve it, you need to take the Apple iPhone SE (2020) device to the nearest service center. The TrueDepth camera system has components that might have been damaged or might not be working properly, for whatever reason, and the service personnel is equipped to resolve this issue for you at the earliest.

Part V: The Bottom Line

Face ID is more than a nifty authentication system in iPhones (and iPads) and brings some unique features that are not found in previous Touch ID enabled devices and enable the users to interact with people (Animojis and Memojis) and with the Apple iPhone SE (2020) (user authentication via facial metrics, Attention Aware features) in new ways. There are times when this does not work as expected, and you can reset and remove Face ID if you feel this is not your cup of tea. Apple iPhone SE (2020) can be used solely with passcodes if you want. If you find that your screen is locked and you can‘t unlock it, you can always find help in tools such as Dr.Fone - Screen Unlock (iOS). So go ahead, use the new Face ID on your Apple iPhone SE (2020) with confidence, and enjoy a more secure experience on your new iPhone than ever before.

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone/iPad Lock Screen Without Hassle.

• Simple, click-through, process.
• Unlock screen passwords from all iPhone and iPad.
• No tech knowledge required, everybody can handle it.
• Supports iPhone 13/ iPhone XS (Max) / iPhone XR / iPhone X / 8 (Plus)/ iPhone 7(Plus)/ iPhone6s(Plus), iPhone SE and the latest iOS version fully!

4,395,217 people have downloaded it