How to Unlock Apple iPhone SE (2020) Passcode Screen?

Apple offers numerous ways to protect users’ iPhone data from other people, such as Face ID, Touch ID, and screen passcode. Screen passcode has its own significance. Usually, it comes to adoption if your Face ID and Touch ID may not work. In other cases, if you restart your device, and didn’t unlock it for 48 hours, or reset it, you may require to unlock your device through a screen passcode.

What would happen if you accidentally forgot your Apple iPhone SE (2020) screen passcode? After entering it about 5 times, your Apple iPhone SE (2020) will get locked for a few minutes with a message on top. It usually gets frustrating when you cannot unlock it with your screen passcode.

This article comes up with different resolutions and techniques for unlocking your Apple iPhone SE (2020). Go through the methods to figure out how you can bypass iPhone screen passcode with ease.

Part 1: Unlock iPhone Passcode Screen by Screen Unlock

You might be anxious if you have locked your Apple iPhone SE (2020) and forgotten the passcode. However, there is no need to worry, Dr.Fone - Screen Unlock is here at your service. The tool handles the Apple iPhone SE (2020) passcode screen problem and removes it effortlessly. The user doesn’t need any technical knowledge beforehand to use the tool.

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone Passcode Screen.

• Completely compatible with different lock screens to get you out of the problem.
• It helps the iOS user bypass iPhone passcode and iCloud activation locks
• If you have forgotten your Apple ID password, Dr.Fone Screen Unlock enables you to unlock your phone and log into a new account in seconds.
• Dr.Fone also helps the user bypass the MDM to access the Apple iPhone SE (2020) device effectively.

3981454 people have downloaded it

Step-by-Step Guide to Bypass iPhone Lock Screen

If you are unfamiliar with using the Screen Unlock feature to get rid of the problem, allow us to walk you through the procedure.

Step 1: Launch Wondershare Dr.Fone

First, download and launch Dr.Fone – Screen Unlock on the computer. Then, click on “Screen Unlock” from the interface. After that, connect your iOS device to the system via lightning cable.

Step 2: Booting the Apple iPhone SE (2020) device

Tap on “Unlock iOS Screen” afterward. Now, Follow the on-screen instructions to boot your phone in Recovery or DFU mode. If you cannot activate the recovery mode, click the button line to work on the DFU mode.

Step 3: Unlocking the iPhone/iPad

After the DFU mode is activated, confirm the Apple iPhone SE (2020) device information, and click on “Download.” After it is downloaded, tap on “Unlock Now.”

Step 4: Device Unlocked Successfully

After the DFU mode is activated, confirm the Apple iPhone SE (2020) device information, and click on “Download.” After it is downloaded, tap on “Unlock Now.”

Part 2: How to Remove iPhone Screen Lock Using the Recovery Mode

There are other ways to unlock screen passcode. For starters, you can consider resolving this issue using the Recovery mode. It is a troubleshooting operation that lets iTunes fix the issue and erase the old passcode. Follow the procedure below vividly:

Step 1: Connecting Process

The first step is to connect the Apple iPhone SE (2020) to computer and then launch iTunes. Force restart the phone after the phone is connected.

Step 2: Activating the Recovery Mode

There are different ways to activate the Recovery mode based on your Apple iPhone SE (2020) models.

• Press and release the Volume Up button if you are on iPhone 13/12/11/XS/XR/X/8 or iPhone 8 Plus. Again, press and release the Volume Down button. Now, press and hold the Side button to activate the Recovery Mode.
• Similarly, if you are an iPhone 7 or iPhone 7 Plus user, press and hold the Volume Down and Side button simultaneously until the Recovery Mode screen doesn’t show.
• Suppose you own an iPhone 6S or earlier, an iPad, or iPod Touch. Press and hold the Home button and the Side buttons. Until the Recovery Mode enables, you need to hold these buttons off.

Step 3: Restoring Process

Click on Restore, and iTunes will download the software for the Apple iPhone SE (2020) device after the process is concluded, set up your Apple iPhone SE (2020).

Pros

• The Apple iPhone SE (2020) is restored to the previous settings, and all messages and emails will be retrieved.
• There is no damage attached with using the Recovery mode to bypass iPhone lock screen.

Cons

• All the data will be lost and erased.
• The non-iTunes app such as music will be lost.

Part 3: How to Unlock iPhone without Screen Passcode Via iCloud

Another viable method to solve the problem is to erase your Apple iPhone SE (2020) with iCloud and remove the passcode. Following are the detailed steps:

Step 1: Signing In

Open iCloud.com on your computer and sign with your Apple ID. All the Apple iPhone SE (2020) devices that are linked with your Apple account will appear.

Step 2: Erasing iPhone

Click on the Apple iPhone SE (2020) device that needs to be removed. Then click on “Erase iPhone”. Now, you can restore the Apple iPhone SE (2020) from the backup or set up a new one.

Pros

• The user is free to access all the Apple iPhone SE (2020) devices through iCloud, whether iPad, iPhone, or iPod.
• The location of the lost device can also be tracked effortlessly.

Cons

• One cannot access iCloud without an Apple ID.
• If your iCloud is hacked, your data becomes a liability for them and can be erased at any time.

Part 4: How to Unlock iPhone without Passcode Via Find My iPhone

You can also consider unlocking your Apple iPhone SE (2020) through Find My iPhone. This platform is suitable for many cases where you can find the distance of your device from yourself with its last recorded location. You can also use it to access and control all the data across your Apple iPhone SE (2020). To unlock your device with this method, you need to:

Step 1: Launch the Find My application on your secondary iPhone and log in with your Apple ID credentials. Click on “Sign In” and proceed.

Step 2: You need to select the “Devices” tab and locate your device in the list. After finding the Apple iPhone SE (2020) device, scroll down and click on the “Erase This Device” button.

Step 3: A confirmation message will be provided where you need to tap “Continue” to proceed. When that particular device connects to the internet, the data across it will start to delete automatically.

Pros

• On activating Lost Mode, you will be notified of the availability of the Apple iPhone SE (2020) device’s location. Your Apple iPhone SE (2020) and data will be protected and will not be accessed until provided with the Activation Lock and screen passcode.
• Using this platform, you can manage all your devices, such as Apple Watch and MacBook.

Cons

• Your device needs to be connected to the internet to be erased.
• If you do not remember your Apple ID and password, it would be impossible for you to reactivate the Apple iPhone SE (2020) device.

Part 5: How to Bypass iPhone Lock Screen Using Siri

If you do not have any potential source for unlocking your Apple iPhone SE (2020), you can consider using Siri for this purpose. Here are the steps to bypass the Apple iPhone SE (2020) lock screen using Siri.

Step 1: You need to activate Siri on your Apple iPhone SE (2020). Keep holding the Home button or Side button according to your Apple iPhone SE (2020) model for activating it. When activated, speak “What time is it” to it.

Step 2: Siri will display the time with a clock icon on the front. Click on the icon to open the associated interface. Click on the “+” icon and proceed to the next screen. You will find a search box on the next screen. Type random characters and hold the tab until it shows the option of “Select All.”

Step 3: You will find the option of the “Share” button soon. A pop-up opens after tapping on the button, which shows different options that can be accessed. Click on “Messages” to move to the next screen.

Step 4: Fill out the “To” box with some characters and click on “Return” on your keyboard. You need to press the Home button or swipe up according to your Apple iPhone SE (2020) model. The home page of your Apple iPhone SE (2020) will be accessed successfully.

Pros

• The data across your Apple iPhone SE (2020) will not get erased with this process.
• You do not need to access any other third-party tool for unlocking your Apple iPhone SE (2020).

Cons

• If you have a version of iOS except 3.2 and 10.3.3, you cannot use this method.
• This method is not applicable if Siri is not activated across your Apple iPhone SE (2020).

Part 6: FAQs about iPhone Screen Lock

1. How many counts do I have to unlock my iPhone?

You have around ten entries to unlock your Apple iPhone SE (2020), after which the Apple iPhone SE (2020) device will be completely locked. After the 5^th wrong entry, you are expected to wait for a minute until you try again. After the 10^th wrong entry, the Apple iPhone SE (2020) device gets locked out and allows you to connect to iTunes.

2. Is it possible to reset the Apple iPhone SE (2020) passcode with an Apple ID?

No, you cannot reset the Apple iPhone SE (2020) passcode using Apple ID. Both are different security measures and cannot reset one using another.

3. What should I know about the screen time passcode?

Parental controls on iPhones use a different passcode to restrict content. It includes restricting things like privacy, game center, web content, explicit content, iTunes app and purchases. It is also known as a restriction passcode.

4. Can Apple reset a forgotten iPhone passcode?

No, Apple cannot reset the forgotten iPhone passcode. However, they will help you with the steps to erase, reset, and recover the phone. You must prove yourself to be the Apple iPhone SE (2020) device owner, so keep the purchase receipt with you.

Conclusion

Human beings are clumsy, and they often forget passcodes to their devices. However, there is no need to panic as technology has progressed enough to offer loopholes in the situations. The article presented multiple methods to bypass iPhone passcode and steer clear of this mess. Some frequently asked questions were also answered regarding the Apple iPhone SE (2020) screen lock.

4 Ways to Unlock Apple iPhone SE (2020) to Use USB Accessories Without Passcode

How do I unlock my Apple iPhone SE (2020)? I know you’re supposed to connect it to the computer and put it in recovery mode but when I do, it says “unlock Apple iPhone SE (2020) to use accessories.”

You may have had the experience of connecting your Apple iPhone SE (2020) to a computer with USB accessories. Usually, “Unlock Apple iPhone SE (2020) to use accessories“ will appear on the screen. In most cases, enter the passcode to unlock the phone, and you can then proceed with data transfer and management. What to do if you forget your screen lock passcode? Here come the most effective methods for you!

Part 1: Why You Need to “Unlock Apple iPhone SE (2020) to Use Accessories”?

The command comes from Apple’s significant privacy safeguard “USB Restricted Mode”. It means after an hour of your iOS device is unlocked, the system cuts off the lightning port and limits it to charging only. Simply put, when your Apple iPhone SE (2020) is locked for more than an hour, it needs to be unlocked to allow the connection of USB accessories. Sometimes, when you unlock your Apple iPhone SE (2020) screen to use USB accessories, it can’t charge anymore.

In 2017, a password cracking tool called GrayKey was launched, which can bypass any iPhone screen lock passcode. The FBI, the police, and some government agencies have all become GrayKey customers. To combat hackers including GrayKey and protect iOS users’ data security, the USB Restricted Mode feature arrived with iOS 11.4.1 in July 2018 and be improved in iOS12.

Part 2: How to Disable USB Restricted Mode?

If you find this warning annoying or your Apple iPhone SE (2020) not charging when using USB accessories, disabling USB Restricted Mode is an optional solution. However, you have to remember the unlock passcode. All the steps will be presented to you next.

• Step 1: Open Settings on your Apple iPhone SE (2020).
• Step 2: Click on Face ID & Passcode (or Touch ID & Passcode), and then input your screen passcode.
• Step 3: Scroll to the bottom of the page and find “USB accessories“ in the “Allow access when locked“ column.
• Step 4: Click the toggle button on the right to disable this feature.

After completing all the steps, your Apple iPhone SE (2020) can connect USB accessories anytime, anywhere. However, it is very common to forget to unlock the passcode. Next, we will recommend four solutions to help you use USB accessories without a passcode.

Part 3: How to Unlock Apple iPhone SE (2020) to Use USB Accessories without Passcode via Dr.Fone?

Now, here comes an amazing App with many benefits to solving the problem for you.  This is Dr.Fone-Screen Unlock, which is very convenient and fast to use. You must be curious about it. More of its advantages will be introduced to you.

• The application is available on both Mac and Windows.
• No technical skills are required.
• It fully supports iPhone X, iPhone 11, and the latest iPhone models.
• Dr.Fone - Screen Unlock can easily unlock 4-digit or even 6-digit screen passcode, Face ID, or Touch ID.
• No Apple ID and password are needed.

Step 1: The first step, of course, is to download Dr.Fone to your computer and click on “Screen Unlock”.

safe & secure

Step 2: Connect your Apple iPhone SE (2020) to the computer with a lightning cable, and choose “Unlock iOS Screen”.

Step 3: Follow the guides to boot your device in Recovery or DFU mode. The Recovery mode is recommended for iOS lock screen removal by default. If you fail to turn on recovery mode, you can turn to activate DFU mode. DFU means Device Firmware Upgrade, and the operation is more mandatory.

Step 4: Click “Start” to download the firmware. After the download is successful, select “Unlock now” and wait a few minutes, the passcode will be removed from your device.

After that, you could set up your Apple iPhone SE (2020) as a new one and unlock your screen to use USB accessories without a passcode.

There is no doubt that you may worry about losing all your data while bypassing the Apple iPhone SE (2020) lock screen. But honestly, there is no tool on the market today that can preserve data to unlock an iPhone. Therefore, it is necessary to back up data in your daily life. Dr.Fone-Phone Backup provides you with a full range of data backup solutions, you can click the link below to learn more.

This guide will teach you about how to unlock iphone using 5 feasible ways.

Part 4: How to Unlock Apple iPhone SE (2020) to Use USB Accessories without Passcode via iCloud?

With iCloud, you can quickly clean up your Apple iPhone SE (2020), remove screen locks, and help unlock your device. But, you have to know that all your data will be erased. Make sure your Apple iPhone SE (2020) has the “Find My iPhone” function enabled, otherwise your device will be offline.

Step 1: Open your computer or another iOS device, and sign in with your Apple account.

Step 2: Click on “All Devices”, choose your Apple iPhone SE (2020), and then “Erase iPhone”.

Now, your Apple iPhone SE (2020) will reboot without a passcode. Then, you can unlock Apple iPhone SE (2020) to use accessories and bypass the passcode.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ ## Part 5: How to Unlock Apple iPhone SE (2020) to Use USB Accessories without Passcode via iTunes?

There is currently no way to unlock an iPhone without erasing all data. Luckily, iTunes can help back up your data before removing it. Please note that this way is only possible if the Apple iPhone SE (2020) device has synced data in iTunes before.

• Step 1: Connect Apple iPhone SE (2020) to a computer with a USB accessory and turn on iTunes. Then iTunes will make a backup for your phone.
• Step 2: Choose “Restore iPhone”.

Wait for a while and you could unlock the screen to use USB accessories. However, in step one, you may need to enter your passcode to get stuck during the process. Therefore, this method is not the most efficient.

Part 6: How to Unlock Apple iPhone SE (2020) to Use USB Accessories without Passcode via Recovery Mode?

If you have forgotten your Apple ID or password and have not synced iCloud and iTunes, you can choose recovery mode. It will remove all your passcode and data as well.

• Step 1: You need to prepare a Mac or PC (Windows 8 or later).
• Step 2: Turn off your Apple iPhone SE (2020).
• Step 3: Put your device in recovery mode. This step might be a little complicated, but don’t worry, we’ll walk you through it step by step.

1. Find the button on your device, it will be useful then.

• iPhone SE (1st generation), iPhone 6s, and earlier: The Home button.
• iPhone 7 and iPhone 7 Plus: The Volume down button.
• iPhone SE (2nd and 3rd generation), iPhone 8, iPhone 8 Plus, iPhone X, and later devices: The side button.

2. Quickly press and hold the button while connecting your phone and computer until the recovery mode appears.

Step 4: Find your tool in iTunes on the computer. Choose Restore and this process will take a few minutes.

Step 5: Unplug your tool and use your Apple iPhone SE (2020) without a passcode.

Now, you’ll get an iPhone which is like being factory reset. And you could unlock the screen to use USB accessories when you forget the passcode.

Part 7: Hot FAQ about USB Accessories on iPhone

Q1: What is the feature of USB Accessories on iPhone?

From USB-A to the latest, USB-C. Also, most iPhones use a proprietary Lightning port.

Q2: Why does My iPhone Think My Charger is a USB Accessory?

It is related to the capacity of the charger. If a low-capacity charger is used, your device must regard it as a USB port because the USB port charges at a lower rate than a good wall charger. Another possibility is that the cable being used is flaky.

Q3: What to Do If My iPhone Not Charging after Unlock to Use Accessories?

• Step 1: Disconnect your tool from the accessory.
• Step 2: Unlock your device.
• Step 3: Connect the USB accessory again.

If it doesn’t work, please contact customer service of Apple.

Conclusion

It is very common to use USB accessories to connect iPhone and computer. Sometimes, we may forget the password, or cannot unlock the screen due to system failure. There are many ways to unlock Apple iPhone SE (2020) to use the accessories in the article. Finally, we recommend everyone to use Dr.Fone - Screen Unlock, a helpful and convenient tool.

safe & secure

Resolve Your Apple iPhone SE (2020) Keeps Asking for Outlook Password

Individuals and organizations use a diverse range of mail platforms to exchange information. Gmail, Outlook, or any alternative service is consistently utilized. While email platforms have revolutionized communication, they aren’t present without their challenges. Users often encounter issues that range from sync errors to authentication problems.

Among these challenges, iPhone users specifically grapple with a persistent issue. It often appears as “iPhone keeps asking for Outlook password.” This issue disrupts the user experience and raises security concerns. To address this problem, this guide presents a detailed guide featuring effective fixes.

Part 1. Why Does My iPhone Keep Asking for Outlook Password

The iPhone asking for Outlook password arises from a combination of factors. Understanding these reasons is crucial in diagnosing and resolving the problem effectively:

1. Incorrect Password Entry

Users might unknowingly enter the wrong password. They may have changed their Outlook password without updating it on their iPhones. This mismatch can trigger continuous password prompts.

Click here

### 2\. Outdated Mail App

An outdated Outlook mail app on your Apple iPhone SE (2020) may struggle to communicate with its latest security protocols. This can lead to performance issues like the Apple iPhone SE (2020) keeps asking for passwords.

3. Network Connectivity Issues

Upholding a stable internet connection is necessary for effortless communication. An unreliable or unstable network can disrupt the synchronization process in Outlook.

4. Corrupted Email Account Profile

A corrupted email account profile on the Apple iPhone SE (2020) can cause disruptions during the authentication process. Resetting the email account on the Apple iPhone SE (2020) device might be necessary to resolve the issue.

5. Third-Party App Interference

Other mail applications installed on the Apple iPhone SE (2020) can also cause an issue. They might interfere with the Outlook app’s proper functioning. Identifying and temporarily disabling such apps can help diagnose and resolve the issue.

6. Excessive Email Fetching

Configuring the Outlook mail app to fetch emails too frequently causes the issue. It can strain the connection with Outlook servers, leading to authentication challenges. That causes issues like the Apple iPhone SE (2020) asking for a password.

7. iOS Software Glitches

The smooth functioning of the Mail app may be disrupted by problems and malfunctions present in the iOS software. Compatibility issues could emerge if your device is not operating on the latest iOS version.

Part 2. [Fixes] Solve iPhone/iPad Keeps Asking for Outlook Password

Now that we have explored why the iPad keeps asking for an Outlook password, it is time for practical solutions. These 13 fixes discussed below are designed to address the root causes comprehensively:

Fix 1. Add Password Once and Let the Prompt Disappear

If your Apple iPhone SE (2020) continuously prompts you for the Outlook password, a simple solution is to re-enter the password. Follow these steps to potentially resolve the issue once and for all by accessing the respective settings:

• Step 1. You begin by accessing your iDevice’s “Settings” app and scrolling down to tap the “Mail” option. Next, press “Accounts,” and on the following screen, select the Outlook account.

• Step 2. Encountering the error message “Account not authenticated” is what you will come across. Now, tap the “Re-enter Password” option to enter your correct Outlook password.

Fix 2. Change the Password to Your Outlook Mail

Sometimes, the email service provider may force users to change their passwords for security reasons. There is a chance that it is why your iPhone asks for an Outlook password. To modify your Outlook password from the desktop platform, adhere to the following steps:

• Step 1. Open your preferred web browser and go to the Outlook login page. Sign in to your Outlook account, locate, and click on your profile picture in the upper-right corner. There, click “My Profile,” and on the next screen, tap “Change Password” near the upper right corner.

• Step 2. Upon reaching the verification page, provide your password and tap the “Sign In” button. Afterward, you will be asked for other verification methods. Upon verifying, the “Change your password” window will appear. Here, you will need to enter your “Current password,” “New password,” and re-enter it to proceed. Then, hit the “Save” button, and your password will be changed.

Fix 3. Checking the Network Connection

Network inconsistencies can often disrupt the authentication process. This can be the leading cause behind persistent password prompts. To ensure a stable connection, ensure that you are connected to a reliable and stable Wi-Fi network. You can also try toggling the Wi-Fi and mobile data switches on and off.

Another way to confirm if network errors are the problem is to try enabling Airplane Mode. After a while, disable the Airplane Mode and check if the issue is resolved.

Fix 4. Using the Mail Toggle as a Remedy

A strategic approach to resolving authentication issues involves using the Mail toggle. You can use it to disable and re-enable the email services. This action essentially resets the Outlook app’s connection and can be performed as follows:

• Step 1. Within your Apple iPhone SE (2020)’s “Settings” app, scroll down and tap “Mail.” On the following screen, press “Accounts” and choose the “Outlook” account.

• Step 2. Here, you will find the toggle switch for “Mail.” Now, turn off the email service and wait for a few moments. Toggle the switch back on to re-enable the email service.

Fix 5. Delete and Re-Insert Outlook Account

Deleting and re-inserting your Outlook account on your Apple iPhone SE (2020) can provide a fresh start to the email integration. Follow these steps if the persistent iPhone keeps asking for an Outlook password:

• Step 1. Navigate to the “Mail” tab within the “Settings” app on your Apple iPhone SE (2020), and choose “Accounts” to observe the roster of email accounts. Here, tap on your Outlook account, and the following screen, press “Delete Account.”

• Step 2. Once you have deleted the account, return to the “Accounts” tab. Select “Outlook.com” after tapping on “Add Account.” Now, follow the on-screen instructions to re-enter your account details.

Fix 6. Re-Check Sync Settings

Ensuring that your sync settings align with Outlook’s recommended configurations is crucial. Follow these steps to re-check and adjust your sync settings on your Apple iPhone SE (2020):

• Step 1. After accessing the “Mail” tab within the Settings app, tap “Accounts.” Here, find and choose the “Fetch New Data” option, followed by selecting the “Outlook” account.

• Step 2. Confirm that the “Push” or “Fetch” settings are configured to your preference. “Push” enables real-time updates, while “Fetch” allows you to set specific intervals for email updates.

Fix 7. Uninstall and Re-Install Outlook App

Is the Outlook app generally showing a lot of glitches on your Apple iPhone SE (2020)? If yes, uninstalling and then re-installing it can address potential “iPhone**/iPad keeps asking for Outlook password”** issues:

Instructions: On your Apple iPhone SE (2020)’s home screen, navigate to the Outlook mail app. Long-press the Outlook app icon and choose “Remove App” from the pop-up menu. Then, tap “Delete App” and follow it by pressing “Delete” to uninstall the app. Afterward, access the App Store and download the Microsoft Outlook app again.

Fix 8. Update iOS From Settings

Outdated iOS versions can contribute to compatibility issues and glitches. This can affect the proper functioning of the Mail app and its integration with Outlook. Follow these steps to ensure your iOS is up to date:

Instructions. Access your device’s “General” settings from the Settings app. Tap “Software Update” on the next screen and check if an update is available. Tap “Install Now” to kick-start the iOS updating process if an update is available. Make sure your device is adequately charged and maintains a stable internet connection.

Fix 9. Try Other Alternatives to Outlook

Exploring alternative mail applications may offer a viable workaround. This is especially true if the iPhone asking for the Outlook password proves resistant to previous solutions. Consider using other email platforms such as Apple Mail, Gmail, and Yahoo Mail. This solution might not directly resolve the issue with Outlook. Yet, an alternative can provide a temporary workaround until a solution is found.

=

Fix 10. Try Disabling Privacy Protection

Certain privacy protection features on your Apple iPhone SE (2020) may interfere with the integration of Outlook. To troubleshoot this, consider temporarily disabling privacy protection settings:

Instructions. On your Apple iPhone SE (2020), access “Mail” settings through the Settings application. Now, scroll down to find and tap the “Privacy Protection” option in the “Messages” section. Next, you will come across the “Protect Mail Activity” switch. Here, toggle off the switch to check if it is resolved.

Fix 11. Reset All Settings of the iPhone

If the persistent password prompts remain unresolved, resetting all settings on your Apple iPhone SE (2020) can be the solution. It acts as a comprehensive solution to potential configuration issues. This action does not erase your data but resets system settings to default. To reset all settings on your Apple iPhone SE (2020), you can follow these steps:

• Step 1. Navigate to the “General” tab in the “Settings” app on your Apple iPhone SE (2020) after you open it. Move down the screen, and at the bottom, choose “Transfer or Reset iPhone.”

• Step 2. On the following screen, tap “Reset” and select “Reset All Settings” from the available options. Enter your device passcode if prompted and confirm the action by selecting “Reset All Settings” again.

Fix 12. Add an Account by Switching to IMAP

In some cases, switching the account type to IMAP during the setup process can help resolve issues. For many users, it has worked to resolve issues related to Outlook password prompts. Follow these steps to add your Outlook account using the IMAP protocol:

• Step 1. Begin by accessing the “Settings” app on your Apple iPhone SE (2020), then scroll down to locate and tap on “Mail.” Within this section, choose “Accounts” to display the roster of email accounts, and proceed to tap on “Add Account.”

• Step 2. Choose “Other” as the account type and select “Add Mail Account.” Enter your Name, full Outlook email address, descriptive description, and unique password, and hit “Next.”

• Step 3. Utilize the specified settings for the “Incoming Mail Server” and “Outgoing Mail Server” sections under the “IMAP” tab:

Incoming Mail Server

Hostname: imap-mail.outlook.com

Username: Your full Outlook email address

Password: Your Outlook password

Outgoing Mail Server

Hostname: smtp-mail.outlook.com

Username: Your full Outlook email address

Password: Your Outlook password

At last, hit the “Next” button at the top-right side of the screen.

Fix 13. Contact Support of Outlook To Resolve

If none of the previous fixes resolve the issue, seek help directly from Outlook Support. Outlook’s support is capable of addressing a broad spectrum of issues. It is adept at delivering personalized assistance tailored to your circumstances.

Bonus Part. Can’t Access Outlook Because iPhone Is Locked? A Quick Solution

The iPhone keeps asking for an Outlook password, which isn’t the only password-related problem. Forgetting the screen locks of their iPhones is a common phenomenon. It is especially prevalent among iPhone users. You can no longer access important Outlook emails when your Apple iPhone SE (2020) is locked. That is where Wondershare Dr.Fone emerges as your savior. This powerful tool can bypass all types of iOS screen locks within minutes.

It can remove lock screens on your Apple iPhone SE (2020), iPad, and iPod. You can say goodbye to the hassle of dealing with iCloud activation locks. Moreover, it helps remove your Apple ID if you have forgotten your Apple ID password. Dr.Fone allows you to bypass them effortlessly without requiring a password.

Prime Features of Wondershare Dr.Fone

1. It can circumvent Mobile Device Management and screen time restrictions without data loss.
2. This tool completely supports the most recent iOS 17, iPadOS 17, and iPhone 15.
3. Additionally, this software effortlessly bypasses carrier locks on your Apple iPhone SE (2020).

Steps To Unlock Your Apple iPhone SE (2020) via Wondershare Dr.Fone

Unlocking your Apple iPhone SE (2020) using Wondershare Dr.Fone is a straightforward process. That is made possible with its intuitive interface and a simple 3-step procedure. You can use the following steps to bypass your Apple iPhone SE (2020)’s screen lock within minutes:

• Step 1: Access Screen Unlock by Launching Dr.Fone

Once you’ve launched Dr.Fone on your computer, go to Toolbox. Here, tap “Screen Unlock” and choose “iOS.” In the opened window, choose the “Unlock iOS Screen” option to unlock your iOS device’s screen. On the subsequent screen, click “Start” to commence the iOS device unlocking process.

• Step 2: Initiating iPhone Recovery Mode and Device Identification

Subsequently, you need to place your Apple iPhone SE (2020) into Recovery Mode. Adhere to the on-screen instructions corresponding to the model of your iDevice. Afterward, the tool will automatically detect the “Device Model.” If necessary, adjust the model and choose the “System Version.” Once these steps are completed, click “Start” to initiate the unlocking process.

• Step 3: Finalizing iOS Device Unlock

Monitor the iOS firmware download progress on the screen. After successful download and verification, proceed by selecting “Unlock Now.” A confirmation window will appear, prompting you to input the necessary code. Enter the code and tap Unlock to proceed to the outcome. Upon unlocking the iDevice, click the “Done” button to finalize the process.

Conclusion

To summarize, resolving an iPhone asking for an Outlook password requires a systematic approach. From re-entering passwords to adjusting settings, this guide has covered 13 comprehensive fixes. For those facing the challenge of a locked iPhone, Dr.Fone offers a reliable solution. Users can ensure integration between their iPhones and Outlook by addressing these issues. This will enhance their overall email experience.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!