How to Unlock Apple iPhone SE without Passcode or Face ID

You can’t access your Apple iPhone SE because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone SE on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone SE model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone SE.
• Use a lightning connector to plug your Apple iPhone SE into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone SE.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone SE will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone SE. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone SE symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone SE tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone SE will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone SE on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone SE Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone SE device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone SE.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone SE and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone SE - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

How Can I Unlock My Apple iPhone SE After Forgetting my PIN Code?

Unlocking a phone using a passcode is a great way to keep your data safe. To secure your device, you can set a 4-digit, 6-digit, fingerprint, or Face ID. However, what will happen if you forgot iPhone PIN? You will not be able to unlock and use the services of your device.

Furthermore, you can’t manage any vital task if you have scheduled it. In such cases, you need to unlock the lock through an efficient procedure. This article elaborates on such practical techniques for iPhone PIN code removal. We will also introduce the top tool available in the market.

All the solutions mentioned here are highly secure and work almost every time. So, if you are worried about the security of your device, we suggest you use Dr.Fone-Screen Unlock. It is the best tool in case of a forgotten iPhone PIN.

Part 1: 4 Simple Ways to Unlock iPhone without Pin

1. “Erase iPhone” option

The steps below work if your Apple iPhone SE or iPad runs iOS 15.2 or later and is connected to the internet. Here’s what you need to do when you forgot iPhone PIN:

• Please enter your password a few times from your device’s Lock Screen until it requests that you attempt another time. Then repeat this activity until you see the Erase iPhone choice in the corner of the screen.
• Tap Erase iPhone, then click again to confirm your activity.

• Enter your Apple account details to sign out of your Apple ID on the phone.
• Tap Erase iPhone back to erase all your user data and settings for all time.
• At the point when the iOS device restarts, adhere to the on-screen directions. Set your phone once more, and restore your data and settings from a backup. Now set a new password for your device.

Instructions to Restore a Locked iPhone Running iOS 15.1 or Prior

• To begin with, put your Apple iPhone SE into DFU recovery mode.
• Then, connect it to a PC or Macintosh through a Lightning link.
• Select your Apple iPhone SE in the Finder sidebar on Mac or iTunes on the PC.
• Pick Restore when you see the choice to Restore. Let the download finish if the download takes over 15 minutes and your device leaves the recovery mode screen. Then, at that point, turn off your Apple iPhone SE and start once more.

• Disconnect your Apple iPhone SE, then, at that point, turn it on and set it up. That’s all you need to do.

2. Use Find My iPhone in iCloud

Apple allows clients to erase iPhone data to safeguard it from others remotely. However, your lock screen can still protect your data if you don’t erase the iPhone. No one can unlock the screen unless they enter the correct password. After too many wrong password attempts, your Apple iPhone SE will be locked. So no one can then touch your user data.

If you have enabled the “Find My” option before forgotten iPhone PIN, there is a chance for you to remove the lock. That is to utilize iCloud.

To unlock iPhone through iCloud:

Step 1. Visit the iCloud.com web page and log in with your Apple ID and passcode.

Step 2. Click the “Find iPhone” option from the different choices available.

Step 3. Click “All Devices” and pick the Apple iPhone SE device you need to unlock.

Step 4. Click the “Erase iPhone” button. Subsequently, set up the Apple iPhone SE device and set another lock screen PIN. With iCloud, you can unlock your iDevice without even touching your device.

3. Unlock it with iTunes

Suppose you use iTunes to restore the Apple iPhone SE in recovery mode; it will install the latest iOS to your device. Doing so will erase all user data from the Apple iPhone SE device, including the lock screen. So, this is also an excellent way to unlock your Apple iPhone SE. However, you must keep a backup of your important files before doing so.

Utilizing iTunes will wipe out the iPhone. You can restore the data from there if you have a previous backup. If you have nothing, you will lose every data on the iPhone.

Additionally, ensure that you keep your iDevices’ Apple ID details safe. Else, you will not have the option to use the iDevice again. Using iTunes will erase the screen’s password but not the firmware. Considering that, you must keep the information in mind to set up and utilize the Apple iPhone SE device.

To sidestep iPhone password with iTunes:

Step 1. Go to Recovery mode

On iPhone 8/8 Or more and Above: Hold the power/side button and press any of the volume buttons until a slider appears. Move the slider to turn off the Apple iPhone SE device. Next, press and hold the power button and connect your Apple iPhone SE to the PC. Hold the button until the Apple iPhone SE device shows the recovery mode screen.

On iPhone 7/7 Or Below: Press and hold the power button until you see the power off slider. Next, move the slider to turn off the iPhone. Then, press the Volume (-) button and connect the Apple iPhone SE device to the PC. Continue to hold the button until you see the recovery mode screen.

Step 2. Restore your Apple iPhone SE.

After you connect your Apple iPhone SE to the PC, you will see a popup window in iTunes. It will warn about an issue with the “Your iPhone name” and ask you to restore it. In that window, select “Restore” to erase the iPhone. If iTunes doesn’t run naturally, open iTunes by double tapping it.

Step 3. Set up iPhone.

Keep waiting until the restoration completes. Then, a short time later, go to your Apple iPhone SE and follow the on-screen directions. That will allow you to set up and utilize your device.

4. Dr.Fone-Screen Unlock

What to do if you forgot iPhone PIN code? As a reference, you have to erase your device to remove the lock. Aside from iTunes, you can use an outsider iPhone unlocker like Dr.Fone-Screen Unlock to unlock your device without a code.

With such software, you don’t have to master some professional skills. Instead, stick to the on-screen directions in Wondershare Dr.Fone-Screen Unlock. Then, you can reset your locked device without any problem. Dr.Fone will eliminate it for you, whether it’s a four-digit code, six-digit code, Contact ID, or Face ID. Here’s how:

Step 1. Get your Device Connected

Install and open the program on a computer, i.e., Mac or Windows. Then, tap the “Screen Unlock” option.

Get your locked iPhone connected to the system utilizing a lightning USB connector. Following these steps, click the “Unlock iOS Screen” feature on the program.

Step 2. Boot the Recovery/DFU Mode on your Device

To unlock iPhone, you need to boot it in Recovery/DFU mode by following the guidelines on your screen. Therefore, the Recovery mode is a better choice for iPhone unlock. Yet, if you face problems while going for the Recovery mode, you may enact the DFU mode.

Step 3. Confirm Your Apple iPhone SE Model

After opening the recovery mode, you can see your Device Model and iOS version. You must select the correct data from the dropdown menu if the information is incorrect. After doing so, click download to download the suitable firmware package for your phone model.

Step 4. Remove the Screen Lock Passcode

After getting the required firmware, click the “Unlock Now” button to begin the process.

Simply in almost no time, your Apple iPhone SE will be unlocked effectively. However, kindly note this unlocking system will likewise wipe all the files and settings on your device. Therefore, you must have a backup of your essential documents beforehand.

Part 2: FAQs

How can I change my PIN on my iPhone?

• Open your Settings app and peer down until you see the passcode menu. On iPhones with a home button, this will be named “Touch ID and Passcode.” On new ones, it is “Face ID and Passcode.”

• Enter your existing code or create a new one.
• Toggle on the “Turn Passcode Off” option.
• Click again to agree, and you’re good to go.

What to do after unlocking my iPhone?

There are certain things you must do after unlocking your iDevice. First, you must immediately set a new PIN for your iDevice. Apart from that, restore your previous data if you have a backup. Having done so, you are good to go.

Can I access my locked iPhone without data loss?

No, you cannot unlock a locked iDevice without losing your data. Apple has made some outstanding security features in their phones. Therefore, you must erase all its content and settings if you need to get your hands on an unlocked phone again.

The Bottom Line

Due to one reason or another, you may have forgotten iPhone PIN. However, it is not that big a deal. In this article, we have proposed some of the best ways you can employ to erase this issue. However, we strongly recommend you use Dr.Fone for a quick solution.

Complete Guide For Apple iPhone SE Lock Screen

Like most iPhone users, you rely on your lock screen to keep your data safe and protected. But with the release of iOS 17, there are a few new features and changes that you need to know about. This complete guide will clarify everything you need to know about the iOS 17 lock screen.

We’ll explain to you how to use the new features, protect your data, and more. So don’t waste any time - read on for all the details!

How to Have a Customized iOS 17 Lock Screen?

Before we get started, you should know that there are three ways to have a customized lock screen in iOS 17. Let’s get to know more about them.

1. How to select your favorite wallpaper

The first way is to use a pre-made wallpaper from the Apple Wallpaper Gallery.

To do this, go to Settings > Wallpapers & Brightness > Choose a New Wallpaper. Then, select the Apple Wallpaper Gallery and choose the image you want to use.

The second way to have a customized lock screen is to use a Live Photo. To do this, go to Settings > Wallpapers & Brightness > Choose a New Wallpaper. Then, select the Live Photo option and choose the image you want to use.

Note: You can only use Live Photos for your lock screen if your Apple iPhone SE is unlocked.

2. How to manage notifications

If you want to manage notifications on the iOS 17 lock screen, there are two ways to do it.

At first, you can go to Settings > Notifications. Here, you can choose how many notifications you want to see on your lock screen and which apps can send you notifications.

The Do Not Disturb feature is the second way to manage notifications. To do this, go to Settings > Do Not Disturb and enable the feature. You can also schedule when Do Not should turn on and off. This feature work like a charm if you want to silence all notifications at night.

3. How to set Auto-Lock time

If you want to set the Auto-Lock time, go to Settings > Display & Brightness > Auto-Lock. Here, you can choose how long it should take for your Apple iPhone SE to lock automatically.

By default, the Auto-Lock time is set to 30 seconds. But you can choose to lock it immediately, after 1 minute, 5 minutes, or never.

How to Turn Off/On Lock Screen in iOS 17?

If you want to turn off the lock screen, go to Settings > Touch ID & Passcode (or Face ID & Passcode). Then, scroll down and disable the Unlock with Passcode (or Unlock with Face ID) option.

Enable the Unlock with Passcode (or Unlock with Face ID) to turn ON the lock screen.

But if you have forgotten your passcode, don’t worry. The next section will show you how to bypass the lock screen.

How to Bypass the iOS 17 Lock Screen Passcode?

Different methods can help you bypass the iOS 17 lock screen passcode. Let’s discuss them in detail.

1. Use Emergency call

The first method to bypass the passcode is to use the emergency call feature.

To do this, access your device with five wrong passcodes attempts. This will trigger the emergency call feature. All you need to do is, dial an emergency number and then tap on the cancel button, and you’ll be taken to the home screen.

That’s how you bypass the lock screen without losing any data.

2. Bypass passcode with iTunes restore

If your Apple iPhone SE needs to be backed up with iTunes sync feature, you can use this method to bypass the passcode.

To do this, connect your Apple iPhone SE to a computer and open iTunes. Then, click the Restore button and follow the on-screen instructions to restore your Apple iPhone SE.

It will take some time, but you can use your Apple iPhone SE without a passcode once it’s done.

3. Use Find My in iCloud

If you have synced your Apple iPhone SE with iCloud, you can try the Find My feature to bypass the lock screen.

To do this, go to icloud.com/#find and sign in with your Apple ID. Then, select your device from the list of devices and click on the Erase button.

To do this, go to icloud.com/#find and sign in with your Apple ID. Then, select your device from the list of devices and click on the Erase button.

All the data will disappear on your Apple iPhone SE, and you’ll be able to access it without a passcode.

This process can also take some time, so be patient.

4. Dr.Fone-Screen Unlock

If all mentioned methods don’t work for you, the ultimate solution is to use Wondershare Dr.Fone-Screen Unlock and bypass the passcode. To finish it, you can follow the steps given below carefully.

Step #1: Download/Install Dr.Fone on your Computer or MacBook

A third-party tool named Dr.Fone-Screen Unlock can help you in this regard. The wonderful part is that you don’t have to learn any technical knowledge.

First, download/install Dr.Fone-Screen Unlock on your computer or MacBook. You can get it from here:

After downloading the tool, install launch it on your PC.

Step #2: Launch the Application and Go for Screen Unlock

Once you have installed the tool, launch it and go to its main window. Here, you will see different features. Select the Screen Unlock feature from the list.

Step #3: Connect your Apple iPhone SE and Activate DFU Mode

Now, you need to connect your Apple iPhone SE to the computer using an Apple original cable. Once done, you need to put your Apple iPhone SE into DFU mode.

To do this, you need to press and hold the Home button and Sleep/Wake button simultaneously for 10 seconds.

After that, release the Sleep/Wake button but keep holding the Home button until Dr.Fone detects your device in DFU mode.

Step #4: Download the Appropriate Firmware

Once Dr.Fone detects your Apple iPhone SE, it will ask you to continue. So, proceed to the next, and here you will be asked to download the correct firmware package for your device.

So, choose the firmware carefully and hit the download button.

Depending on your internet connection, you may have to wait for a longer time. But once the firmware is downloaded successfully, you can proceed to the next step.

Step #5: Unlock your Apple iPhone SE

After the firmware is downloaded, you need to press the Unlock Now button, and Dr.Fone will start to unlock your Apple iPhone SE without a passcode. Once it is done, you can get into your device without any restriction.

FAQs

Why iOS 17 Lock Screen is not working?

There could be many reasons for the malfunction of the Lock Screen in iOS 17. The most common reason is the installation of incompatible jailbreak tweaks. Therefore, it is recommended to remove all the jailbreak tweaks and check whether the problem persists.

You can try resetting your device to factory settings if the problem still exists. But make sure to back up your data before doing so, as it will erase all your data.

How do I fix my iOS 17 lock screen bugs?

There are various ways to fix the lock screen bugs in iOS 17. You can try resetting your device to factory settings, or you can also try restoring your device from a previous backup.

If none of these methods work, you can try using a third-party tool like Dr.Fone-Screen Unlock to bypass the lock screen.

How do you unlock a locked iPhone iOS 17?

There are various ways to unlock a locked iPhone running on iOS 17. You can try the feature of Find My iPhone, or you can also use a third-party tool like Dr.Fone-Screen Unlock.

How do you fix an unresponsive lock screen on iPhone running on iOS 17?

If your lock screen is unresponsive on iPhone running on iOS 17, you can try force restarting your device. To do this, you need to press and hold the Home button and Sleep/Wake button simultaneously for 10 seconds.

After that, release the Sleep/Wake button but keep holding the Home button until you see the Apple logo. Once your device is restarted, check if the problem persists or not.

If the problem still bothers you, you can try using a third-party tool like Dr.Fone-Screen Unlock to reset the phone, eventually fixing the issue.

The Bottom Line

So this is what we want to talk about the iOS 17 Lock Screen with you. We have tried to cover everything in this article, including the new features, lock screen bugs, and how to fix them.

All the fixes mentioned above are tested and proven to be working. So you can try them without any hesitation.

But if you are still facing problems with your lock screen, then the greatest thing you can do is to use a third-party tool like Dr.Fone-Screen Unlock. This tool is very easy to use and will unlock your device within minutes.

So, if you are looking for a hassle-free solution to fix your lock screen issues, then this is the best one you should never miss.