How to Unlock Apple iPhone 14 with a Mask On

Are you tired of wearing a mask in this pandemic? Apple introduced a new feature through which people can unlock iPhone face ID while wearing a mask. Before this, people either had to use other types of passwords or put off the mask to use Face ID. However, this feature is only available on iOS 15.4, depicting that iPhones containing earlier iOS versions won’t be able to enjoy this feature.

Only iPhone 12 and the latest models can use Face ID with a mask on, which reflects that models like iPhone 11, iPhone X, and the older models cannot utilize this function. Moreover, an additional way to unlock iPhone is to use Apple Watch to unlock iPhone 11, X, or earlier models.

Once you meet these requirements, you can easily unlock your Apple iPhone 14 while wearing a mask and get further details by reading this article.

Part 1: How to Unlock iPhone Face ID with a Mask on

Are you excited to unlock your Apple iPhone 14 while wearing a face mask? This section will give you detailed steps to unlock your Apple iPhone 14 with a mask on, but before proceeding, make sure that you have updated your phone’s model to iPhone 12 or iPhone 13. This iOS 15.4 version feature is only available on:

• iPhone 12
• iPhone 12 Mini
• iPhone 12 Pro
• iPhone 12 Pro Max
• iPhone 13
• iPhone 13 Pro Max
• iPhone 13 Pro
• iPhone 13 Mini
• iPhone 14
• iPhone 14 Pro
• iPhone 14 Pro Max
• iPhone 15
• iPhone 15 Pro
• iPhone 15 Pro Max

Once you have updated to iPhone 12 or iPhone 13 model, you will automatically receive the prompt to set your Face ID while wearing a mask. If you have missed the chance to scan your face during the setup of iOS 15.4, follow the below guidelines to activate this fantastic feature unlock iPhone with a mask:

Step 1: Navigate to the app “Settings” from the home screen of your Apple iPhone 14. From the displayed menu, select “Face ID & Passcode.” Enter your passcode to give verification.

Step 2: Tap on the toggle switch of “Use Face ID with a Mask.” Afterward, select “Use Face ID with a Mask” to begin with settings.

Step 3: Now, it’s time to scan your face with your Apple iPhone 14 to initiate the setup. Again, you don’t have to wear a mask at this stage, as the Apple iPhone 14 device’s main focus while scanning would be the eyes. Also, if you wear glasses, you can proceed without taking them off.

Step 4: After scanning your face twice, select “Add Glasses” by tapping on it. You can use your Face ID while wearing your regular glasses. Make sure that you scan your face with every pair of glasses daily.

After carefully following the steps mentioned above, you are ready to unlock your Face ID with a mask. Remember that Face ID will scan and focus mainly on your eyes and forehead. However, it cannot work in the scenarios if you have completely concealed your look by wearing hats or accessories that can hide your face.

Part 2: How to Unlock iPhone Face ID Using Apple Watch

Before unlocking iPhone through the Apple Watch, some requirements are necessary for security reasons. Read the following requirements to proceed further:

• First, you would need an Apple Watch that must be functioning on WatchOS 7.4 or later.
• The passcode on your Apple iPhone 14 must be enabled from the settings. If you have not enabled the passcode on your Apple iPhone 14, you can do it by navigating to the “Settings” and tapping on “Passcode.” From there, enable the passcode by turning it on.
• You should be wearing the Apple Watch on your wrist, and it must be unlocked.
• Your Apple iPhone 14 should be upgraded to iOS 14.5 or above.
• The wrist detection on your phone should be activated.

To enable the feature of unlocking the Apple iPhone 14 with an Apple Watch, the steps are:

Step 1: Head to the “ Settings “ app and choose “Face ID & Passcode.” Give your passcode for authenticity and proceed further.

Step 2: Now, on the displayed menu, scroll down to the bottom, where you will see the toggle of “Unlock with Apple Watch.” Tap on that toggle to enable this feature.

After enabling this feature, you can unlock your Apple iPhone 14 with a mask on through your Apple Watch. You need to grab your phone and hold it the same way you would in a normal Face ID scan. The phone will be unlocked, and you will feel a slight vibration on the wrist. Also, a notification will pop up on your watch, indicating that your Apple iPhone 14 has been unlocked.

Bonus Tips: Unlock iPhone Without Any Experience

Are you stuck with your locked iPhone? Don’t worry, as Dr.Fone - Screen Unlock can unlock any screen passcode, Face ID, Touch ID, and PINs. You don’t need any technical experience to use this tool, as the user interface is pretty simple and understandable. Moreover, it works perfectly well on all iOS devices at the best possible speed.

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone/iPad Lock Screen Without Hassle.

• Intuitive instructions to unlock iPhone without the passcode.
• Removes the iPhone’s lock screen whenever it is disabled.
• Works for all models of iPhone, iPad and iPod touch.
• Fully compatible with the latest iOS 11,12,13.

3981454 people have downloaded it

You can also unlock Apple ID and iCloud passwords without losing the data. Also, while unlocking iPhone Screen Time Passcode through this platform, all of your data and information will be kept intact, and you can function your phone normally again.

Conclusion

We all can relate that unlocking an iPhone on Face ID while wearing a face mask in a pandemic era is annoying. That’s why Apple introduced a new feature of unlocking the Apple iPhone 14 Face ID with a mask on to help individuals who rely entirely on Face ID. Find out about enabling this feature to easily unlock your Apple iPhone 14 Face ID while wearing a mask.

How to Unlock Apple iPhone 14 With an Apple Watch & What to Do if It Doesn’t Work

There are plenty of reasons why Apple devices are in such high demand. The quality of the products is unquestionable – few can argue the superior quality of the Apple iPhone 14’s camera, for instance. Almost all devices are long-lasting. They have a great resale value. They offer cutting-edge features.

However, perhaps the greatest advantage of Apple products is just how well they integrate with one another and work together.

With a quick little tap, you can have your Apple iPhone 14’s camera working as your Mac’s webcam. You can use your iPad as a second Mac display. Take calls using any device.

Moreover, you might be able to use the Apple Watch to unlock your Apple iPhone 14.

Now, you cannot just unlock any Apple iPhone 14 with your Watch. The devices must be paired, and you’ll need to follow a few steps to enable this option. Here’s how to unlock your phone using your Apple Watch like a pro.

Part 1. Can I Use an Apple Watch To Unlock My Apple iPhone 14?

The Apple iPhone 14 face ID is one of the simplest, most practical ways to unlock your phone. While you’ll need a passcode just as another security layer, you won’t have to worry about someone else breaking in if they know it, going through your messages, or collecting your private information.

With face ID, only you can unlock your phone, sign in to your favorite apps, and even authenticate purchases.

The problem is that neither face ID nor traditional passcodes aren’t always the most convenient option. If you wear sunglasses, safety goggles, a face mask, or other face coverings and can’t take them off for some reason, face ID won’t work. If you have gloves on and can’t type in your passcode, your passcodes won’t work.

What could work is your Apple Watch.

Depending on the Apple Watch version you own and your Apple iPhone 14 model, you could use your watch to unlock your phone in any circumstances. It’s easy, secure, and convenient, above all else.

Part 2. Requirements for Unlocking Apple iPhone 14 With Apple Watch

Unfortunately, not every Apple iPhone 14 can be unlocked with your Apple Watch, and not every Apple Watch can unlock your Apple iPhone 14. Both devices must meet some requirements before you can adjust your settings to enable this option.

To be able to use your Apple Watch to unlock your phone with the utmost ease, you’ll need:

• An Apple iPhone 14 with Face ID – Apple iPhone 14 X and newer models;
• iOS 14.5 and newer versions;
• An Apple Watch series 3 and newer models;
• watchOS 7.4 and newer versions.

Additional requirements you’ll need to meet include:

• Your Apple iPhone 14 and Apple Watch need to be paired;
• Both devices need to have WiFi and Bluetooth turned on (but a connection to a WiFi network isn’t necessary);
• You need to have a passcode on your Apple Watch;
• Wrist detection on your watch needs to be turned on;
• The watch needs to be on your wrist and unlocked.

You’ll also need to wear items such as sunglasses, face coverings, ski masks, or others that prevent you from using your Apple iPhone 14 Face ID.

Part 3. How To Unlock Apple iPhone 14 With an Apple Watch

If you meet all the aforementioned criteria, setting up the feature to unlock your Apple iPhone 14 using an Apple Watch is easy. You’ll just have to follow a few steps:

• Step 1: Go to Settings > Face ID & Passcodeon your Apple iPhone 14;

• Step 2: Type in your passcode;
• Step 3: Find and enable Unlock with Apple Watch.

Remember that your Apple Watch’s wrist detection must be turned on for this option to work. When you tap to enable Unlock with Apple Watch, if your wrist detection isn’t turned on, you’ll get a prompt on your phone asking you to turn it on.

You can turn on wrist detection on your watch by following these steps:

• Step 4: Go to Settingson your Apple Watch;
• Step 5: Tap on the Passcode;
• Step 6: Toggle Wrist Detection

Now that you’ve enabled the option to unlock your Apple iPhone 14 using your Apple Watch, it’s time to simply start using the feature. To unlock your phone, you’ll need to:

• Have your Apple Watch on your wrist, unlocked;
• Tap on your Apple iPhone 14 or raise it to your face to activate it;
• Glance at your phone while wearing a face mask, sunglasses, or another item that’s preventing you from using Face ID;
• Swipe up on your phone’s screen.

Your Apple Watch will send an alert when you’ve used it to unlock your Apple iPhone 14. If you accidentally unlock your phone, simply tap on the Lock Apple iPhone 14 on the screen of your watch to lock it.

However, remember that the next time you want to use your Apple Watch to unlock your Apple iPhone 14, you’ll first need to type in your passcode.

Part 4. What To Do if You Can’t Unlock Your Apple iPhone 14 With a Watch

Generally speaking, unlocking your Apple iPhone 14 with an Apple Watch should be a simple, seamless task. Unfortunately, though, that’s not always the case. A glitch or a bug could be preventing you from enjoying this feature, so take a look at a few things you could try to fix it.

1. Check All Settings & Reconfigure

As mentioned earlier, there are a few requirements that your devices need to meet to unlock your Apple iPhone 14 with your Apple Watch.

If you’re using the correct versions of Apple iPhone 14 (iPhone X, iOS 14.5 and newer) and Apple Watch (series 3, watchOS 7.4 and newer), try to reconfigure your settings.

Make sure that you have:

• A passcode on your watch;
• Wrist detection turned on;
• Feature Unlock with Apple Watchturned on on your Apple iPhone 14.

If all the settings are correct, try one of the following options.

2. Restart Your WiFi/Bluetooth Connection

Your Apple iPhone 14 and your Apple Watch need to have both WiFi and Bluetooth turned on. If they’re turned on on both devices, try turning them off and back on again to restart the connection.

Remember, you only need WiFi and Bluetooth on but don’t need to be connected to a WiFi network.

If the problem persists, you could also restart your devices and try again.

3. Reset Your Face ID

In some instances, it’s the Face ID feature that’s causing trouble, so you might want to try and reset it. It’s much easier than it may sound, you just need to follow the next few steps:

• Step 1: Go to your Apple iPhone 14’s Settings;
• Step 2: Select Face ID & Passcode;
• Step 3: Tap Reset Face ID.

When you tap on this, you’ll need to go through the process of setting your Face ID as usual. You’ll need to type in your passcode, hold your Apple iPhone 14 in front of you (in portrait orientation), tap to get started, and put your face in the provided frame.

Move your face to complete the circle, then tap on Continue. Repeat the face scan process the second time and select Done.

4. Do a System Repair on Your Apple iPhone 14

If your Apple Watch unlock is still misbehaving, you might need to do a full system repair. As a general rule of thumb, it’s best to use verified apps like Dr.Fone to prevent the problem from getting worse.

Dr.Fone Apple iPhone 14 system repair is designed to be fast, efficient, and safe. It can repair virtually any system glitch in less than five minutes, ensuring your phone operates seamlessly.

To perform a standard system repair with Dr.Fone, follow the next few steps:

• Step 1: Download and launch Dr.Fone on your computer;
• Step 2: From the Toolboxon your left-hand side, select System Repair;

• Step 3: Connect your Apple iPhone 14 to your PC using a cable connection;
• Step 4: Select your device type in the new window that opens;
• Step 5: Select iOS repair;

• Step 6: Select Standard Repair Mode;
• Step 7: Follow the on-screen instructions and select Enter Recovery Mode;
• (Alternatively, select Guideif your phone is unresponsive);
• Step 8: Select the iOS firmware you want to download and install on your device;
• Step 9: Wait for the download to finish, then select Repair Now;
• Step 10: Wait until the process is complete, then select Done.

If it was a system mistake preventing you from unlocking your Apple iPhone 14 with your Apple Watch, the option should be functioning well after the Dr.Fone iOS repair.

5. Reset Network Settings

If the problem wasn’t due to a system glitch, you should try resetting your Apple iPhone 14’s network settings. The process is simple, just:

• Step 1: Go to Settings > General > Reset > Reset Network;
• Step 2: Type in your passcode.

Resetting your network settings will clear out data from your internet, local network, and devices, including WiFi passwords, some Bluetooth connections, and more. However, your paired devices, such as the Apple Watch, shouldn’t be removed.

6. Reset Your Watch and Pair It Again

Finally, if you’re still experiencing issues, you might need to reset your Apple Watch and pair it with your Apple iPhone 14 again.

It’s all quite simple:

• Step 1: Press and hold the power button;
• Step 2: Drag the slider under Power offto the right;
• Step 3: Press and hold the power button to turn the Apple iPhone 14 device back on.

To perform a hard reset, simultaneously press and hold the power button and digital crown.

Conclusion

Using your Apple Watch to unlock your Apple iPhone 14 is convenient when you cannot use the Face ID feature. It allows you to seamlessly unlock your phone when wearing sunglasses, goggles, face masks, or other face coverings that prevent the Face ID from working.

Enabling this option is a straightforward process, and if there’s ever a glitch, there are several options you could try to repair it.

How To Fix Auto Lock Greyed Out on Apple iPhone 14

Auto-lock on iOS devices serves multiple purposes - it conserves battery life, secures your data, and more. But have you encountered the Auto-Lock greyed-out dilemma, fixed at 30 seconds? When this setting becomes inaccessible, it limits your control over screen timeout.

Read on if you’ve encountered a similar problem on your iOS device. In this guide, we’ll explore the possible reasons and offer steps to fix Auto-Lock greyed out on iPhone and iPad devices. If force restarts or settings resets haven’t worked for you, we’ve got alternative solutions. Let’s get started.

Part 1: Why Is Auto-Lock Greyed Out on iOS Device?

There are a few reasons why the Auto-Lock might be greyed out on your Apple iPhone 14 or iPad device, preventing you from adjusting the duration. Here are the most common culprits:

Low Power Mode

When you activate Low Power Mode on your iOS device, you might notice the screen automatically locking after 30 seconds of inactivity. This quick sleep setting, implemented to minimize power usage, explains why the Auto-Lock option appears greyed out and inaccessible.

Screen Time Restrictions

Screen Time restrictions can impact Auto-Lock. For instance, if your downtime schedule blocks all apps, the screen locks itself, even if the Auto-Lock timer hasn’t run out.

MDM Profile Restrictions

If the Auto-Lock is greyed out on your iPad or iPhone and you use it for work or school, a Mobile Device Management (MDM) profile might be the reason. This profile restricts settings, including Auto-Lock. To fix this, contact your IT administrator and ask if they can adjust the MDM profile settings.

Alright, you know the possible reasons why the Auto-Lock option is not working on your iOS device. Still, you might be wondering how to fix the Auto-Lock greyed-out issue. Below are several ways to get your iPad or iPhone Auto-Lock working normally again.

Fix No.1: Disable Low Power Mode

Your iPhone Auto-Lock greyed out because Low Power Mode limits background activities, including the Auto-Lock option. In this mode, you cannot change the Auto-Lock settings. Turn off Low Power Mode to fix this issue and choose your preferred timeout. Here’s how:

• Step 1: Go to your Apple iPhone 14 or iPad’s Settings app.
• Step 2: Scroll down and tap Battery. It will show you your device’s battery usage and available settings.
• Step 3: Turn off the Low Power Mode. Now, the greyed-out Auto-Lock option in Settings should be available again.

Low Battery Mode can stretch your battery life further. But if you need your screen to stay on longer, like while reading an article or watching a video, you can turn it off. It lets you adjust the screen timeout in Settings so it stays awake for as long as you like.

Fix No.2: Check Screen Time Restrictions

You’ve ruled out the Low Power Mode, but the Auto-Lock greyed out on iPad or iPhone remains. If Low Power Mode isn’t causing the problem, your screen time settings might be the issue. Some app restrictions can limit your screen use to specific times, causing it to lock automatically. Resolve this by removing limits, such as downtime and app restrictions, or turning it off.

• Step 1: Open the Settings app on your iOS device.
• Step 2: Go to Screen Time, then scroll down.
• Step 3: Tap Turn Off Screen Time.

Fix No.3: Remove MDM Configuration Profile

A configuration profile is a file that contains settings and restrictions that can be applied to an iOS device. Organizations, schools, or IT administrators often use it to manage devices remotely and enforce specific configurations. Once installed, the settings within a profile override the Apple iPhone 14 device’s default settings. It can include restrictions related to security, network access, app usage, and more.

Since an MDM configuration profile causes limitations, like the greyed-out Auto-Lock on iPad, removing it can be the solution. Doing so frees your iOS device from external settings imposed by the profile. Then, it could allow you to adjust the Auto-Lock time setting as you normally would.

• Step 1: See the configuration profiles you installed on your iOS device.

• Go to Settings> General > VPN & Device Management on your Apple iPhone 14.

• Go to Settings> General > Profiles & Device Management on your iPad.

• Step 2: Select the configuration profile you need to delete.

• Step 3: Tap Remove Profile, enter your device passcode, then tap Remove.

Fix No.4: Remove Network Settings Installed by MDM

Businesses often use Mobile Device Management (MDM) to remotely manage their employees’ iPhones and iPads. MDM lets IT admins push software updates, restrict apps, and remotely wipe a lost device. This keeps corporate data safe and devices under control, whether the company or the employee owns them.

If you’re having trouble with a greyed-out Auto-Lock timeout setting, disassociating your device from MDM might be an option. But remember, this is a big step. Make sure you follow your company’s authorized procedures to avoid unintended consequences.

If your IT team gives the green light, you might also be able to remove the network settings installed by MDM. Just proceed with caution, as messing with these settings could lead to instability or data loss. Here’s how:

• Step 1: Open the Settings app on your iOS device.
• Step 2: Navigate to General > Profile or VPN & Device Management (or a similar section).
• Step 3: Select the management and tap Remove Management.

If the option is unavailable, only the person who used Apple Configurator 2 or handles your company’s mobile device management platform can remove it.

Fix No.5: Use Dr.Fone To Bypass MDM Lock Without Data Loss

Unfortunately, manually removing profiles can be tricky, especially if they’re associated with MDM, Apple School Manager, or supervised configurations. These often require the removal of passwords, admin privileges, or complete data wipes. But there’s good news. Wondershare Dr.Fone - Screen Unlock (iOS) provides a simpler and safer solution.

Here’s why you should try it:

• **Speedy and Efficient:**No more endless troubleshooting. Dr.Fone bypasses the MDM lock in minutes, saving you precious time.
• **Data Stays Safe:**Unlike factory resets, Dr.Fone keeps all your precious photos, messages, and apps right where they belong.
• **No Jailbreaking:**Say goodbye to complex hacks and warranty voiding. Dr.Fone works without jailbreaking your Apple iPhone 14, keeping it healthy and secure.
• **Universal Compatibility:**Whether you own the latest iPhone with iOS 17 or an older version, Dr.Fone has your back. It supports all iOS devices and versions starting from iOS 7.0.

Have you ever bought a used iPad or Apple iPhone 14 to find the Auto-Lock option greyed out and isn’t working? Mobile Device Management (MDM) profiles, often deployed by companies or schools, can restrict functionality. If you lack the credentials to bypass or remove it, Dr.Fone can help remove all MDM restrictions on your iOS device. Here’s how:

• Step 1: Download and open Dr.Fone on your computer. Next, connect your Apple iPhone 14 or iPad to the computer using a USB cable and navigate to Toolbox > Screen Unlock > iOS.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

• Step 2: Within the Screen Unlock tool window, select Unlock MDM iPhone.

• Step 3: Select Bypass MDM, then click Get Start to proceed.

• Step 4: Please review the message carefully before initiating the MDM bypass process. Once you’ve read it, click Start to Bypass to proceed.

• Step 5: If prompted, go to your device’s Settings > Apple ID > iCloud and turn off the Find My feature. Next, click OK to initiate the MDM bypass.

• Step 6: The software will display the progress of the bypass. Wait for it to complete.

• Step 7: You’ll see a confirmation message once the bypass is successful. Click Done to exit. Your device should now be free from MDM restrictions.

Fix No.6: Check and Adjust Auto-Lock Settings

Once you’ve tried all the fixes above, you might need to set up the Auto-Lock timeout again.

1. Setup Auto-Lock on iPad

Here are the steps on how to change Auto-Lock on iPad devices:

• Step 1: Within the Settings app, scroll down the list on the left-hand side and tap Display & Brightness.
• Step 2: On the right-hand side of the Display & Brightness screen, tap the Auto-Lock option.

• Step 3: A list of time options will appear, ranging from 2 minutes to 15 minutes, as well as Never. Select the time you want your iPad to wait before automatically locking the screen after inactivity. If you want the screen to stay on indefinitely, choose Never.

Step 4: Once you’ve selected your preferred auto-lock duration, you can exit the Settings app. The change will be applied automatically.

1. Setup Auto-Lock on iPhone

Here’s how to change Auto-Lock on iPhone devices:

• Step 1: Open the Settings app.
• Step 2: Tap on Display & Brightness, scroll down, and tap Auto-Lock.
• Step 3: Choose the desired time interval for your Apple iPhone 14 to automatically lock. The available options typically range from 30 seconds to 5 minutes. You may also have the option to select Never if you prefer to have the screen stay on indefinitely until you manually lock it.

Conclusion

There you have it. This guide has equipped you with the knowledge and solutions to fix the Auto-Lock greyed out on your Apple iPhone 14 or iPad devices. From identifying the reasons like Low Power Mode and MDM configurations to implementing actionable fixes, you can now change your screen timeout. So, turn off those restrictions, remove MDM profiles, and head back to Settings.

For an easy solution, use Dr.Fone Screen Unlock to bypass MDM restrictions, giving you control over your device. Whether it’s a work phone or a personal device under MDM, Dr.Fone can offer an efficient solution. With a few clicks, you’ll have the Auto-Lock back on track, ensuring your iOS device works again just how you want it.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!