How to Unlock Apple iPhone SE without Passcode or Face ID

You can’t access your Apple iPhone SE because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone SE on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone SE model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone SE.
• Use a lightning connector to plug your Apple iPhone SE into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone SE.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone SE will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone SE. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone SE symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone SE tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone SE will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone SE on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone SE Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone SE device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone SE.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone SE and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone SE - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

How to Access Your Apple iPhone SE When You Forget the Passcode?

We all have secrets in our iPhone or some important financial or business data that we all wish to protect from unwanted access. For this, we set up a passcode. But what if Apple iPhone SE passcode is forgotten by you? Well, you may now wonder how to perform Apple iPhone SE passcode bypass, right? Worry no more! We’re right here to help you with the proven solutions for Apple iPhone SE passcode reset without iTunes or with it too. Let’s explore.

Part 1. Unlock Apple iPhone SE screen passcode in one click (unlock tool needed)

The first and the ultimate measure for Apple iPhone SE passcode removal in just a matter of a single click is Dr.Fone - Screen Unlock (iOS) . With the help of this mighty tool, performing Apple iPhone SE passcode reset is even easier than any other alternative. Not only it can perform Apple iPhone SE passcode bypass, you can also make use of this tool to bypass lock screen of an Android smartphone too. Isn’t it amazing? Moreover, this powerful tool works effortlessly with the latest iOS 13 version and even with the most recent iPhone models as well. Here is the step by step tutorial on Apple iPhone SE passcode bypass.

Step 1: Install and launch Dr.Fone - Screen Unlock (iOS)

Get the tool Dr.Fone - Screen Unlock (iOS) downloaded and installed over your computer system. Then establish a connection between your computer and iPhone.

Now, launch the tool and then opt for the “Unlock” tile from the main screen.

Step 2: Boot in Recovery/DFU mode

Next move that you need to perform is to opt for the correct mode, i.e. “Unlock iOS Screen”. Then, you’ll be prompted to boot your device in Recovery/DFU mode. The on-screen instructions will guide you on how to do it.

Step 3: Double-Check iPhone information

On the upcoming screen, you’ll be displayed the “Device Model” and most recent “System Version” which is compatible with your Apple iPhone SE. Simply, hit the “Start” button here.

Step 4: Perform Apple iPhone SE passcode removal

Once, the software downloads the firmware automatically, you can then proceed to Apple iPhone SE passcode reset. Hit the “Unlock Now” button over the next screen and in a short while you’ll be notified that Apple iPhone SE passcode removal is completed.

safe & secure

Part 2. Restore an iTunes backup for Apple iPhone SE

Here we’re going to be familiar with the Apple iPhone SE passcode reset using the renowned iOS data management tool, iTunes. But be sure that iTunes version installed over your computer is up to date or else unknown errors may crop up in between. Eventually, your all-new Apple iPhone SE may even get bricked. Think this is it? Well, here’s another problem with iTunes, you need to get your Apple iPhone SE connected only to a pre-synced or pre-trusted computer. Or else, this tutorial won’t bring any good to you.

Step 1: First, get your Apple iPhone SE connected to your PC. Then, launch the iTunes most recent version. It will automatically detect your Apple iPhone SE. Once detected, tap the “Device” icon over the left top corner of iTunes.

Step 2: Then, hit the “Summary” option from the left panel and then you need to hit the “Restore iPhone” button. Confirm your actions by simply pushing the “Restore” button on the pop-up message and you’re done. Now, just wait for the process to complete.

Part 3. Restore Apple iPhone SE in recovery mode to remove screen passcode

If somehow, the above solution fails and you’re just not able to get Apple iPhone SE passcode reset. You need to boot your device into recovery mode and then perform the factory reset. This would certainly wipe off everything from your Apple iPhone SE including the passcode as well. Here are the steps involved in booting your Apple iPhone SE in recovery mode.

• First things first, power off your Apple iPhone SE by pushing the “Side” button down along with either of the “Volume” button. Keep them pressed till you get to see “Power-off” slider over your screen. Now, simply drag it to power off your device.
• Next, connect your Apple iPhone SE and your computer firmly with the help of an authentic cable. Please make sure to press and hold the “Side” button meanwhile.
• Ensure not to let go the Side button till the recovery mode screen appears over your Apple iPhone SE.

• Once the Apple iPhone SE device is booted in recovery mode, iTunes will throw a pop up message that “iTunes has detected an iPhone in recovery mode”. Simply, hit the “OK” button over the message and then push the “Restore iPhone” button followed by confirming your actions.

Part 4. Use “Find iPhone” from iCloud

The next pro tutorial for Apple iPhone SE passcode removal is via iCloud. For this, grad access to any computer available on your side. Or, you can also make use of any other smartphone device but ensure it must be connected to a WiFi network or have an active data pack. Moreover, the locked iPhone on which you’re going to perform Apple iPhone SE passcode reset should also have an active internet connection to make this tutorial work.

Note: Since we’re going to unlock your Apple iPhone SE using Find My iPhone service of iCloud. It is important that “Find My iPhone” service was enabled beforehand over your Apple iPhone SE.

Step 1: Launch the browser over any other smartphone device or computer. Then, visit the official web page iCloud.com.

Step 2: Now, make use of same Apple account configured with your Apple iPhone SE to sign in to iCloud. Then, opt for the “Find My iPhone” icon over the launch pad.

Step 3: Next, tap on the “All Devices” drop-down menu available over the top midsection and then select the Apple iPhone SE that you wish to bypass the passcode off.

Step 4: Then, you’ll get to witness a pop-up window over your screen. Tap the “Erase iPhone” button over it and then confirm your actions. All the settings and data will be wiped off remotely from your Apple iPhone SE now.

Step 5: Lastly, wait for the process to complete and upon completion set up your device as usual.

Part 5. How about Apple iPhone SE restrictions passcode?

Apple iPhone SE restrictions is a vital setting that is used to lock down a set of functions of the iPhone. These iPhone restrictions are also known as Parental Controls. That implies one can make use of these settings to block or hide songs that have explicit lyrics/content or barring YouTube from running, etc.

It is vital to set up a 4 digit passcode if you want to use iPhone restriction settings. Now, if you somehow forgot the passcode that was set to make use of iPhone restrictions, you need to restore your Apple iPhone SE with the help of iTunes to remove the previous passcode. But ensure not to restore an old backup of iPhone or else, the old passcode which you may not know will also get activated. Eventually, making your situation even worse.

Reset/Change Apple iPhone SE restrictions passcode

Now, in case you know the Apple iPhone SE restrictions passcode and just wish to reset it. Then follow the streak of steps mentioned below.

1. Launch “Settings” of your Apple iPhone SE and then get into “General” followed by “Restrictions”. Now, you’ll be asked to key in the current passcode.

1. Once you’ve entered the current passcode, hit on the “Disable Restrictions” and to confirm your actions, key in your passcode when prompted.

1. Lastly, hit on “Enable Restrictions”. You’ll be asked to set up a new passcode now. Do it and you’re done.

How To Unlock Apple iPhone SE Without Passcode? 4 Easy Methods

The Apple iPhone SE are high-end smartphones with many features and capabilities. However, if you forget your passcode, these phones are nothing more than a paperweight. So, if you have also forgotten your passcode, you may be wondering how to unlock your Apple iPhone SE 11/12 or 13 without a passcode.

This blog post will discuss several methods to unlock your Apple iPhone SE without a passcode. So, this article will be very helpful if you have forgotten your Apple iPhone SE’s passcode or are just looking for ways to unlock iPhones without a passcode.

Is It Possible to Unlock Apple iPhone SE without a Passcode?

Unlocking an iPhone without a passcode is possible, but it’s not as simple as entering a code. Besides, there are different methods that you can follow to unlock your Apple iPhone SE on 11/12/13.

And we are going to teach all those methods with some simple steps. So, without any further ado, let’s get started.

5 Easy Ways to Unlock Apple iPhone SE without Passcode by Yourself

Use Find My iPhone

Once you have activated the Find My iPhone function, then you can try it to unlock your Apple iPhone SE without a passcode. This is an easy and effective method to complete this task. Here’s how you can do it:

Step 1: Go to icloud.com from any web browser on your computer or another iOS device.

Step 2: Enter your Apple ID and password to log into your iCloud account.

Step 3: Click on the ‘Find My iPhone’ option.

Step 4: Select the ‘All Devices’ option at the top of the screen and select your Apple iPhone SE from the list of devices.

Step 5: Click the ‘Erase’ option to confirm your action.

Step 6: Once your device has been erased, you can set it up again and use it without a passcode.

Unlock it with iTunes

Another way to unlock your Apple iPhone SE without a passcode is by using iTunes. For this method to work, you must have synced your device with iTunes at least once. If you haven’t done that, this method won’t work. Here’s how you can use iTunes to unlock your Apple iPhone SE:

Step 1: Connect your Apple iPhone SE to the computer you previously used to sync your device with iTunes.

Step 2: Open the iTunes application on your computer and wait for it to recognize your device.

Step 3: Once recognized, your Apple iPhone SE will appear in the iTunes window. Click on the ‘Summary’ option present in the left sidebar.

Step 4: Now, click on the ‘Restore iPhone’ button in the right sidebar.

Step 5: Confirm your action and wait for the process to be completed. Once done, you can set up your device as new and use it without a passcode.

Unlock iPhone in Recovery Mode

If you have never tried to sync your device with iTunes or used the Find My iPhone feature, you can use recovery mode to unlock your device. This more complex method will erase all the data on your device. So, ensure that you have backed up your data before proceeding with this method. Here’s how you can use recovery mode to unlock your Apple iPhone SE:

Step 1: Connect your Apple iPhone SE to the computer and launch the iTunes application.

Step 2: Press and hold down the ‘Volume’ and ‘Power’ buttons simultaneously for a few seconds.

Step 3: As soon as you see the Connect to iTunes screen, release the buttons.

Step 4: On your computer, you will now see a message that iTunes detected an iPhone in recovery mode. Click on the ‘OK’ button.

Step 5: Now, click on the ‘Restore iPhone’ button in the Summary tab.

Step 6: Confirm your action and wait for the process to be completed. Once done, you can set up your device as new and use it without a passcode.

Use Siri (only iOS version 10)

You can use this hack to unlock your Apple iPhone SE without a passcode. But it just functions on devices running iOS 10 or lower. So, if you are using a newer version of iOS, this method won’t work for you.

Here’s how you can use Siri to bypass the Passcode:

Step 1: Press and hold the Home button to activate Siri.

Step 2: Say something like “Siri, what time is it?” or “Siri, who am I?”

Step 3: Siri will likely respond with an error message saying that she can’t answer these questions while your device is locked. However, she will also give you the option to “Tap to open Clock.”

Step 4: Tap on “Clock,” and you’ll be taken to the Clock app. From here, you can access other apps like Calendar, Reminders, and more.

But this method will not work on newer iPhones 11/12/13 and iPhone 14 because they run on the latest iOS.

Dr.Fone-Screen Unlock

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone Without Passcode.

• Simple, click-through process.
• Unlock screen passwords from all iPhones and iPad.
• No tech knowledge is required. Everybody can handle it.
• Supports iPhone 14/13/12/XS (Max) / iPhone XR / iPhone X / 8 (Plus)/ iPhone 7(Plus)/ iPhone6s(Plus), iPhone SE, and the latest iOS version fully!

4,395,217 people have downloaded it

If no method is applicable, the ultimate solution is Dr.Fone-Screen Unlock. It is a professional tool that can unlock your Apple iPhone SE without a passcode. It is elementary to manipulate and can unlock any iPhone within minutes. Plus, it doesn’t cause any damage to the Apple iPhone SE device, which is always a good thing.

If you are interested in using this tool, then here’s how you can do it:

Step 1: Start Dr.Fone on your computer. Then, launch the program and select “Screen Unlock.

Step 2: Create the connection from your Apple iPhone SE to the computer with a lightning cable.

Step 3: Follow the image on the screen to make your device enter in DFU mode or Recovery mode.

Step 4: Once your device gets into DFU mode or Recovery mode, Dr.Fone will ask you to choose the right firmware for your Apple iPhone SE.

Step 5: Upon selecting the right firmware, Dr.Fone will start downloading the firmware for your device. Once it’s finished, click “Unlock Now” to remove the Passcode.

You only need to wait for some time as the process may take several minutes. So be patient and don’t interrupt the process; otherwise, it may permanently damage your Apple iPhone SE.

Once the process is completed, your Apple iPhone SE will be unlocked, and you can choose a new passcode.

This is the easiest and most effective way to reset your Apple iPhone SE passcode. So, if you’re looking for a hassle-free solution, this is the one you should choose.

How Can I Turn On/Off the Passcode on My iPhone?

If you want to turn the Passcode ON your Apple iPhone SE, then follow these steps:

Step 1: Go to ‘Settings’ and select ‘Touch ID & Passcode’ (if you’re using an iPhone with Touch ID). If you’re using an iPhone without a Touch ID, select ‘Passcode.’

Step 2: Enter your current Passcode when prompted.

Step 3: Scroll down and toggle the ‘Passcode’ switch to the ‘ON’ position.

Step 4: Enter a new 6-digit passcode when prompted. Then, please enter it again to confirm.

That’s it! Your Passcode is now turned ON, and your device is more secure than ever.

To shut down the Passcode on your Apple iPhone SE, follow the steps above and toggle the ‘Passcode’ switch to the ‘OFF’ position.

The Bottom Line

As you see in the article, there are some ways to reset your Apple iPhone SE passcode. However, if you’re looking for an easy and effective solution, we recommend using Dr.Fone-Screen Unlock. It is a professional tool that can unlock your Apple iPhone SE without a passcode. Plus, it doesn’t cause any damage to the Apple iPhone SE device, which is always a good thing.

If you’re not interested in using a third-party tool, you can try one of the methods mentioned above. But keep in mind that these methods may only work on some iPhones. So, if you need help deciding which way to use it, we recommend going with Dr.Fone-Screen Unlock.